INSTRUCTION. The smallest GPS watch locator in the country

Transcription

1 Please read the user manual carefully before you use it, so that you can get the correct installation and make quick online activation. Product appearance and color are subject to change. Actual product may differ from picture. The smallest GPS watch locator in the country INSTRUCTION

2 1 Hardware Description LED display Time display Battery capacity display Microphone pick-up hole USB interface On/off button Reset hole SOS button Locator terminal quickly sends its location information to the mobile phone and the computer via SMS and GPRS.The locator operating conditions can be inquired by accessing the online service platform or mobile phone. The default login ID is the SN number stuck on the back of the machine and the default login password is: (Note: SMS command password and the platform password are not the same) 1

3 Accessories Product Features SOS for help: In case of emergency, press the SOS button to send the help message to the guardian. Dual positioning: Dual monitor and positioning of GPS satellite and base stations can achieve real-time locating and tracking around the clock. Smart power-saving: Three power-saving modes and ultra-long standby. USB charging cable Charger Remote monitoring: Microphone with high sensitivity: in case of an emergency situation of user, the surrounding sound of the device can be monitored in real time. History: Inquire about the device history within three months whenever and wherever possible.. GSM GSM Quad-band System: 850/900/1800/1900MHz Time display: GPS precise timing, no need to manually adjust the time. Instructions

4 4 5 4 Product Specifications Technical parameters GSM bands 850MHz/900MHz/ 1800MHz/1900MHz Battery capacity 3.7v 450mA GSM/GPS MTK6252/MTK3326 Maximum Speed 515 m / sec. GPRS GPS sensitivity Class 12, TCP/IP build in GSM MODULE -159dBm Dimensions (Case) Weight 47.0(L) x 36.0(W) x15.0(h) mm 15g GPS positioning precision 10m(2D RM) Operating Temperature -20 ~ +70 GSM positioning precision m Humidity 20% ~ 80%RH Speed precision 0.1m / s Voltage 4V Cold boot Less than 38 seconds Standby average current <10mA Warm start Less than 32 seconds Warm boot Less than 2 seconds Maximum altitude 18,000 m

5 6 5 Instructions for use Start-up steps: 1. Open the back cover of the watch, insert the SIM card and fit the cover; 2. Press the power button and start up the device. Note: 1. Please use the SIM card of GSM network ; 2. The device must be shut down in order to put the SIM card, otherwise the card will be burnt; 3. SIM card must be inserted correctly, otherwise it will be damaged; 4. SIM card of terminal needs to have GPRS function; 5. SIM card of terminal needs to have the caller display function; 6. Use cell phone to dial SIM card of terminal, SIM card is correctly installed if the call can be put through.. Unnecessary to adjust 006 watch time: GPS precise timing, no need to manually adjust the time. 006 watch charge instruction: If it is fully charged and not switched on, the display will show a battery icon and "ok ; If it is started up, the grid of the battery icon is full. 6 instructions of locator terminal setting Instructions of locator terminal setting (via SMS setting) Note: The center number setting should be the first step after the purchase. If the center number is not set, all alarm functions cannot be achieved. Default password of the device is: The command ", " must be entered in the English input method, otherwise it will be invalid command! 1. Set the center number Command: pw, password, center, cellphone number# Use cellphone to send text messages to the terminal SIM card number; pw, , center, the owner phone number# The terminal returns after successful setting: the center number is set successfully! 2. Delete center number Command: pw, password, center, d# pw, , center, d# The terminal returns after successful setting: the center number has been deleted! 3. Set the monitor number Command: monitor, cellphone number # Use the well-set center number to send text messages to the terminal SIM card number; monitor, any valid phone number # Note: The terminal SIM card should have the function of Caller ID display. 7

6 4. View Chinese address location Command: 123 reply in Chinese. Command: url reply latitude and longitude information. 5. Change passwords Command: pw, the new password # Use the center number to send text messages to the terminal SIM card number; The terminal returns when set successfully: Password is set successfully! Password: Upload interval setting Command: upload, time # upload, 15# Terminal returns: No return! 7. Set sos number Command: sos, no1, cellphone number # sos, no1, # Terminal returns: SOS number is set successfully! 8. Delete SOS number. Command: sos, no1, d # Use the well-set cellphone number to send text messages to the terminal SIM card number; sos, no1, d # Terminal returns when set successfully: SOS command is set successfully! 9. Restore factory settings Command: fctor y # factor y # Terminal returns when set successfully 10. Restart Command: reset # The device will be automatically restarted. 11. Acknowledgment of alarm Command: alarm# alarm# Terminal returns: The alarm has been released! 8 9

7 12. View software version number Command: verno# Terminal returns: the version number and date and time 13. High-performance mode setting Command: m1, interval # Remarks: The device can be used for 6-10 hours if successfully set. The recommended interval setting is 15 seconds! 14. Command: General mode m3, interval# Command: Use center m2, number interval to send # text messages to the terminal SIM card number; Use Remarks: center The number device to send can be text used messages for to hours the terminal if successfully SIM card set. number; m2, Its function 600 # is base station positioning! Remarks: The device can be used for hours if successfully set. The return time is not less than 300 seconds. Recommended setting is 600 seconds! 15. Power-saving mode 10 11

8 Warranty card (Main Card ) Product Name Date of purchase Product Serial Number User Address Model Unit of sold User Name Contact Phone Date of service Fault content Maintenance staff 1. Please keep the warranty certificate and show it in case of repair. 2. The certificate will not be reissued in case of loss.