Art Gallery Ontario Toronto, Ontario, Canada
|
|
|
- Melanie Griffith
- 8 years ago
- Views:
Transcription
1 Robert Malczyk Principal, Equilibrium Consulting Inc. Vancouver, BC, Canada Art Gallery Ontario Toronto, Ontario, Canada Art Gallery Ontario Toronto, Ontario, Canada Art Gallery Ontario Toronto, Ontario, Canada Dokument in English 1
2 2
3 Art Gallery Ontario - Toronto, Ontario, Canada The 180 meter long, 14 meter high glass and glulam façade wall is the main feature in Architect Frank Gehry s rejuvenation of the Art Gallery of Ontario. Equilibrium Consulting was retained by Structurlam Products, the glulam supplier, to carry out the detailed design and engineering for the hundreds of geometrically different and complex connections. The contract required that all connection be essentially concealed from view. In addition to the considerable challenges in geometry, many connections are also required to carry large axial and bending forces along multiple axes in combination, while accommodating stringent tolerances and aesthetic requirements. The presentation will illustrate the design, modelling, fabrication and erection challenges our team encountared during the last 3 years of work on this project. Different parts of this large scope project will be presented with the emphasis on the coordination of work done by many different consultants and subcontructors. Special attention will be directed to the glulam to glulam and glulam to steel connections. The very demanding geometry together with the large forces resulted in very challenging connection design, manufacturing and erection. The use of computer modelling in solving complicated design issues combined with on line meetings with consultants in different regions of North America will be presented as a model of cooperation. This project was only possible thanks to the extraordinary team work between the Architect, Engineer of Record, General Contractor, Specialty Enegineers, Fabaricators and Erectors and their dedication to the final sucess. 1 Transformation ARCHITECT: Gehry International ENGINEER OF RECORD: Hallcraw Yolles SPECIALTY TIMBER ENGINEER: Equilibrium Consulting GLULAM MANUFACTURER: Structurlam Products 1.1 Glulam Areas - Dundas Façade - South Tower - Walker Court 1.2 Main Parts - Radials - Louver Headers - Top Chord - Bottom Chord - Mullion Grid 3
4 2 Fabrication - Creno - Hundegger K2 4
5 2.1 Modelling shop drawings - Katija - Cadwork 5
6 3 Erection - Existing Buildings - Steel Glulam Coordination - Site Restraints 3.1 Overview - Existing Buildings - Dundas Street 6
7 3.2 First Radials - Erection - Bottom Steel Beam Connection - Top Steel Outriggers Connection 3.3 Radials Assemby - Continued - Increase in Slope - Connections to edge steel beams 7
8 3.4 Top Chord - No Bending Moment from Radial to Top Chord - Top Chord Splice 8
9 3.5 Box Beam - Steel Fabricator - Coordination - Glulam to Steel Connections 3.6 Louver Headers - Moment Connections - 1 side moment changed to 2 side moment 9
10 4 Mullion Grid - Sample - Testing in Florida 4.1 Temporary Bracing - Bottom to steel beam - Top to outriggers 5 Transport - BC to Ontario - Accident 10
11 6 Walker Court South Tower - Simple Geometry - Existing Buildings 7 Summary - Complicated Geometry - Very High Loads - Coordination Required - Most Challenging Project 11
SHARP. Focus. AESS serves as the focal point of a small eye-care office in Austin. BY BRIAN SAYRE, P.E., AND K. MARK MERRYMAN, P.E.
SHARP Focus BY BRIAN SAYRE, P.E., AND K. MARK MERRYMAN, P.E. AESS serves as the focal point of a small eye-care office in Austin. YOU COULD SAY THAT Eye Physicians of Austin had a clear vision for its
U.S. Department of Labor Occupational Safety and Health Administration Directorate of Construction. April 2015
Investigation of the November 13 and 14, 2014 collapses of two pedestrian bridges under construction at Wake Technical Community College Campus, Raleigh, NC U.S. Department of Labor Occupational Safety
Design of Steel Structures Prof. S.R.Satish Kumar and Prof. A.R.Santha Kumar. Fig. 7.21 some of the trusses that are used in steel bridges
7.7 Truss bridges Fig. 7.21 some of the trusses that are used in steel bridges Truss Girders, lattice girders or open web girders are efficient and economical structural systems, since the members experience
COLUMN-FREE OFFICE SPACE RISES IN CHICAGO S LOOP
COLUMN-FREE OFFICE SPACE RISES IN CHICAGO S LOOP 30 x45 bay provides maximum tenant flexibility and increases leasing marketability By David E. Eckmann AIA, S.E. P.E. SURGING DEMANDS FOR RENTABLE OFFICE
INSTALLATION. General. Important Note. Design. Transport
General The roof trusses you are about to install have been manufactured to precise engineering standards. To ensure that the trusses perform as designed, it is essential that they be handled, erected
Code of Standard Practice for Timber Frame Structures
TFEC 2-2013 Code of Standard Practice for Timber Frame Structures August 2013 Preface This Code is intended to represent a reasonable consensus of what constitutes ordinary and acceptable practice within
Brock Commons Phase 1 University of British Columbia, Vancouver, Canada
Construction Underway on World s Tallest Timber Tower Construction of the 18 storey Brock Commons Student Residence at the University of British Columbia in Vancouver, Canada got underway in November 2015.
Handling, Erection and Bracing of Wood Trusses
Handling, Erection and Bracing of Wood Trusses Follow these guidelines for safe installation of Wood Trusses. These guidelines should not be considered to be the only method for erecting and bracing of
Steel joists and joist girders are
THE STEEL CONFERENCE Hints on Using Joists Efficiently By Tim Holtermann, S.E., P.E.; Drew Potts, P.E.; Bob Sellers, P.E.; and Walt Worthley, P.E. Proper coordination between structural engineers and joist
Component Solutions Software Suite
Component Solutions Software Suite As a supplier of connectors for trusses and engineered-wood products, Simpson Strong-Tie has been involved in the structural building component industry for decades.
Residential Prototype III. Multi-Story. The Multi-Story. Your connection to ideas + answers. Prepared by: AISC Steel Solutions Center
Multi-Story Residential Prototype III The Multi-Story Residential Prototype III Prepared by: AISC Steel Solutions Center What s this? This package tells the story of a fictitious project with an imaginary
First 14-storey wood building in the world at Bergen in Norway Premier bâtiment en bois à 14 niveaux au monde à Bergen en Norvège
First 14-storey wood building in the world at Bergen in Norway R. B. Abrahamsen 1 First 14-storey wood building in the world at Bergen in Norway Premier bâtiment en bois à 14 niveaux au monde à Bergen
4B-2. 2. The stiffness of the floor and roof diaphragms. 3. The relative flexural and shear stiffness of the shear walls and of connections.
Shear Walls Buildings that use shear walls as the lateral force-resisting system can be designed to provide a safe, serviceable, and economical solution for wind and earthquake resistance. Shear walls
ENTRY FORM. DVASE 2013 Excellence in Structural Engineering Awards Program
ENTRY FORM DVASE 2013 Excellence in Structural Engineering Awards Program PROJECT CATEGORY (check one): Buildings under $2M Buildings Over $100M Buildings $2M-$10M Other Structures Under $5M Buildings
A 38-story design-build steel structure features a staggered-truss frame
ALADDIN HOTEL A 38-story design-build steel structure features a staggered-truss frame Robert J. McNamara is president of McNamara/Salvia, Inc., in Boston. Among his more notable projects during his more
Suitable for large-area facades, commercial properties, conservatories, extensions plus detached, semi-detached and terraced houses.
Timber-Glass-Composite elements (TGC) Architecture is based on three principles: Firmitas, Utilitas and Venustas. Vitruv, Roman architect Naturalness, energy efficiency and structural flexibility: uniglas
THE ROAD TO PRODUCTIVITY
THE ROAD TO PRODUCTIVITY Lessons Learned by the Structural Steel Industry Tom Faraone, PE Senior Regional Engineer October 31, 2006 It started with the mills TODAY 1980 PRODUCTIVITY Today.5 man-hours/ton
Project Profile: Canerector Inc. Office Supplies Interiors & Furniture Print & Documents Facility Resources Technology
Project Profile: Canerector Inc. Office Supplies Interiors & Furniture Print & Documents Facility Resources Technology The Challenge When the time came to move into its new location, a business condominium
REBUILDING WOOD TRUSSES WITH STEEL. Despite a major renovation
REBUILDING WOOD TRUSSES WITH STEEL Moisture damage to structural elements required an innovative solution to preserve a historic structure By Ethan Buell, P.E., and David Carroll, P.E. Despite a major
The Thin Line Modern window films can offer much, much more than simple solar control.
The Thin Line Modern window films can offer much, much more than simple solar control. Digital print The day of the silk screen may be coming to an end, as fully digital glass printing makes its first
FLYNN GROUP OF COMPANIES. the total building envelope
FLYNN GROUP OF COMPANIES the total building envelope FLYNN GROUP OF COMPANIES the total building envelope Redefined Flynn designs, builds, installs and maintains complete building envelopes the only trade
Chapter 5 Bridge Deck Slabs. Bridge Engineering 1
Chapter 5 Bridge Deck Slabs Bridge Engineering 1 Basic types of bridge decks In-situ reinforced concrete deck- (most common type) Pre-cast concrete deck (minimize the use of local labor) Open steel grid
The Analysis of Open Web Steel Joists in Existing Buildings
PDHonline Course S117 (1 PDH) The Analysis of Open Web Steel Joists in Existing Buildings Instructor: D. Matthew Stuart, P.E., S.E., F.ASCE, F.SEI, SECB, MgtEng 2013 PDH Online PDH Center 5272 Meadow Estates
Professional Engineers Providing Structural Engineering Services In Buildings
GUIDELINE Professional Engineers Providing Structural Engineering Services In Buildings 1995 Published by Association of Professional Engineers of Ontario Revised 12/11/98 CONTENTS INTRODUCTION...3 PART
Some Say It Can t Be Done - We Think Different
Some Say It Can t Be Done - We Think Different In just under 44 years, Dowco has grown from a three-person operation to become one of the largest fully automated 3D Modeling and Virtual Construction Service
Conceptual design and design examples for multi-storey buildings
Brussels, 18-20 February 2008 Dissemination of information workshop 1 Conceptual design and design examples for multi-storey buildings Dr.-Ing. Christian Müller Dipl.-Ing. Matthias Oppe RWTH Aachen Overview
2. Axial Force, Shear Force, Torque and Bending Moment Diagrams
2. Axial Force, Shear Force, Torque and Bending Moment Diagrams In this section, we learn how to summarize the internal actions (shear force and bending moment) that occur throughout an axial member, shaft,
Statics of Structural Supports
Statics of Structural Supports TYPES OF FORCES External Forces actions of other bodies on the structure under consideration. Internal Forces forces and couples exerted on a member or portion of the structure
Schwerlastbrücke (68 m Spannweite) im Norden von Canada
18. Internationales Holzbau-Forum 2012 Schwerlastbruecke im Norden von Canada M. Oberholzer 1 Schwerlastbrücke (68 m Spannweite) im Norden von Canada Heavy-duty bridge with a 68 m span in northern Canada
BUILDING INTEGRATED PHOTOVOLTAICS
BUILDING INTEGRATED PHOTOVOLTAICS STEVE COONEN DEFINITION Building Integrated Photovoltaics (BIPV) Grid Connected BIPV Schematic AC Loads DC Disconnect Inverter Electrical Distribution Panel AC Disconnect
OPTIMAL DIAGRID ANGLE TO MINIMIZE DRIFT IN HIGH-RISE STEEL BUILDINGS SUBJECTED TO WIND LOADS
International Journal of Civil Engineering and Technology (IJCIET) Volume 6, Issue 11, Nov 215, pp. 1-1, Article ID: IJCIET_6_11_1 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=6&itype=11
A Breathtaking. Kansas City s new performing arts center is a showcase of outstanding steel-framed structures.
Kansas City s new performing arts center is a showcase of outstanding steel-framed structures. A Breathtaking PreludeBy mitch gehringer AAtop a hill with a commanding view to the south and overlooking
BIM keeps on trucking:
BIM keeps on trucking: Helps metal building project save time and money. As featured in a lead article in the July 2012 edition of Metal Construction News, this metal building project is among the first
CE591 Lecture 8: Shear Walls
CE591 Lecture 8: Shear Walls Introduction History, examples Benefits Disadvantages Plate Girder Analogy Behavior of Special Plate Shear Walls (SPSW) Design of SPSW Important considerations Special Plate
PART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
Timber Frame Construction
Timber Frame Construction Introduction Design and Detailing What is timber? Failure modes History of timber frame construction Forms of timber frame construction Live and dead loads Wind loads Roof construction
OSHA Scaffold Standard for Construction. 29 CFR 1926 Subpart L
OSHA Scaffold Standard for Construction 29 CFR 1926 Subpart L EH&S Jim Walker What is the revised OSHA scaffold standard for construction? Issued on August 30, 1996 and became effective on November 29,
INTRODUCTION TO BEAMS
CHAPTER Structural Steel Design LRFD Method INTRODUCTION TO BEAMS Third Edition A. J. Clark School of Engineering Department of Civil and Environmental Engineering Part II Structural Steel Design and Analysis
Construction Management Applications: Challenges in Developing Execution Plans
Construction Management Applications: Challenges in Developing Execution Plans Presented by: Amlan Mukherjee and Nilufer Onder Michigan Technological University May 14, 2010 --- ICAPS, Toronto Construction
Renovation and upgrading of Waterlandplein post-war housing blocks, Amsterdam
Renovation and upgrading of Waterlandplein post-war housing blocks, Amsterdam Ertskade 111 1019 BB Amsterdam t +3120 622 57 17 f +3120 623 82 84 e info@heeswijk.nl i www.heeswijk.nl Tall gallery-access
King Post Wall Information
King Post Wall Information DAWSON-WAM specialise in the installation of piled retaining wall systems including steel sheet piling, concrete piled walls and king post walls. This document is our guide to
Beginning on Friday, Jan 22, and on subsequent investigations, the following issues were identified:
Date: 2/15/2016 Project: To: Middleton Public Library Roof Repair Pamela K. Westby Library Director Middleton Public Library 7425 Hubbard Avenue Middleton WI 53562 Pamela, Strategic Structural Design,
APPENDIX H DESIGN CRITERIA FOR NCHRP 12-79 PROJECT NEW BRIDGE DESIGNS
APPENDIX H DESIGN CRITERIA FOR NCHRP 12-79 PROJECT NEW BRIDGE DESIGNS This appendix summarizes the criteria applied for the design of new hypothetical bridges considered in NCHRP 12-79 s Task 7 parametric
Materials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
Investigation of the November 2, 2013 collapse of concrete beams at Fort Lauderdale-Hollywood Airport runway project
Investigation of the November 2, 2013 collapse of concrete beams at Fort Lauderdale-Hollywood Airport runway project U.S. Department of Labor Occupational Safety and Health Administration Directorate of
Computer Aided Engineering (CAE) Techniques Applied To Hip Implant
International Journal Of Computational Engineering Research (ijceronline.com) Vol. 3 Issue. 3 Computer Aided Engineering (CAE) Techniques Applied To Hip Implant 1, M. S. Abo_Elkhair, 2, M. E. Abo-Elnor,
One-third of all fatalities in the U.S. construction
Guardrail systems: Fall prevention for floor and wall openings and open-sided floors One-third of all fatalities in the U.S. construction industry result from falls from elevations. Falls from elevations
SIMPLE SAVER SYSTEM DESIGN MANUAL
SECTION 5: BAR JOIST CONSTRUCTION DETAILS SIMPLE SAVER SYSTEM DESIGN MANUAL Call Toll-free: 1-800-255-0776 Fax: 1-402-454-2708 E-mail us at: custserv@thermaldesign.com SIMPLE SAVER SYSTEM DESIGN MANUAL
Jonathan Logsdon Architect
e x i s t i n g 0 10 Metres Office Kitchen 2180 2800 1240 1975 Up 345 2280 Main Stair Up 150 Hall 2790 25 Snug Lounge 720 to underside +1580 1110 2920 2680 E X I S T I N G P A R T G R O U N D F L O O R
Commercial And Industrial Steel Buildings
Commercial And Industrial Steel Buildings Arco Building Systems, Inc. Since 1979 Arco has been providing the highest quality steel buildings to contractors and owners throughout the United States. Leadership
Glulam Appearance Classifications for Construction Applications
T E C H N I C A L N O T E Glulam Appearance Classifications for Construction Applications Number Y110C July 2010 This Technical Note clarifies the distinction between appearance considerations and structural
MAT 75 STRUCTURAL SUPPORT SYSTEM
MAT 75 STRUCTURAL SUPPORT SYSTEM A GROUP COMPANY Structural Support Applications About the Mat 75 System For decades, Mabey Bridge & Shore has served the international construction community by providing
Analysis and Repair of an Earthquake-Damaged High-rise Building in Santiago, Chile
Analysis and Repair of an Earthquake-Damaged High-rise Building in Santiago, Chile J. Sherstobitoff Ausenco Sandwell, Vancouver, Canada P. Cajiao AMEC, Vancouver, Canada P. Adebar University of British
Deflections. Question: What are Structural Deflections?
Question: What are Structural Deflections? Answer: The deformations or movements of a structure and its components, such as beams and trusses, from their original positions. It is as important for the
EMR Shielding of single level home from 3G mobile phone tower
YSHIELD Shielding Paints EMR Shielding of single level home from 3G mobile phone tower Project carried out by YSHIELD Australia using HSF 54 shielding paint and Eco 30 shielding fabric. 1) Shielding paint
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
The RIGHT SOLUTIONS for Canada s Oil and Gas Industry. T&B Cable Tray Systems
The RIGHT SOLUTIONS for Canada s Oil and Gas Industry T&B Cable Tray Systems What if you could get all the right solutions from one reliable Canadian source? Engineers, contractors and end-users working
Structural Steel Connections STEEL S T E E L STRUCTURE OF THE EVERYDAY : STRUCTURE OF THE EVERYDAY. American Institute of Steel Construction
Title Slide STRUCTURE OF THE EVERYDAY : Structural Steel Connections STEEL 1 STRUCTURE OF THE EVERYDAY American Institute of Steel Construction PRODUCTION TEAM College of Architecture UNC - Charlotte Project
Partnership. National. Program. Calgary Edmonton Vancouver Toronto
Calgary Edmonton Vancouver Toronto Buildex / PM Expo Prospectus Align your company with Canada s premier conferences and expositions for Real Estate & Property Management As the pre-eminent voice for Canada
The Building Trades Protection Act
1 BUILDING TRADES PROTECTION c. B-8 The Building Trades Protection Act Repealed by Chapter S-15.1 of the Statutes of Saskatchewan, 2013 (effective April 29, 2014) Formerly Chapter B-8 of The Revised Statutes
Complex Sloping Steel Roof Issues
Complex Sloping Steel Roof Issues SEAC/ RMSCA Steel Liaison Committee September 17, 2009 Disclaimer SEAC, RMSCA, nor its committees, writers, editors and individuals who have contributed to this publication
d e n v e r a r t m u s e u m
d e n v e r a r t m u s e u m The Denver Art Museum Expansion will be a dramatic addition to the downtown Denver skyline and will help place Denver among the top art centers in the nation. The new addition
Engineering Better Buildings
Engineering Better Buildings TM The CORE, Calgary As part of a long-range Energy Master Plan, Halsall was engaged to provide an Integrated Energy Assessment to identify and plan for energy conservation
INDUSTRY OVERVIEW. Analysis in the IPSOS Report are based on the following assumptions:
The information presented in this section has been derived from various official Government and industry sources. The Directors believe that the sources of this information are appropriate sources for
WorkSafe Guidance Document FALL PROTECTION IN RESIDENTIAL CONSTRUCTION
WorkSafe Guidance Document FALL PROTECTION IN RESIDENTIAL CONSTRUCTION WorkSafe Guidance Document Fall Protection in Residential Construction Table of Contents Executive Summary... 1 Introduction... 1
Construction OS&H Working at height
Construction OS&H Working at height Summary Common hazards with working at height General OS&H requirements when working at height Scaffolding Structural frames Demolition of above ground structures Roof-work
Petition for a Nonimmigrant Worker Pursuant to Section lol(a)(ls)(h)(i)(b) of the Immigration and Nationality Act, 8 U.S.C. 9 1 101(a)(lS)(H)(i)(b)
identifying data deleted to prevent clearly unwarranted invasion of personal p:ivacy U.S. Department of flonleland Security 20 Mass. Ave., N.W., Rm. 3000 Wash~ngton, DC 20529 PUBLIC COPY FILE: WAC 07 063
NAPCS Product List for NAICS 54134: Drafting Services
NAPCS List for NAICS 54134: Drafting Services National 54134 1 Drafting Producing detailed layouts, plans, drawings, illustrations, graphics or models based on engineering or architectural specifications,
SLAB DESIGN. Introduction ACI318 Code provides two design procedures for slab systems:
Reading Assignment SLAB DESIGN Chapter 9 of Text and, Chapter 13 of ACI318-02 Introduction ACI318 Code provides two design procedures for slab systems: 13.6.1 Direct Design Method (DDM) For slab systems
Construction Technologies Career Field Pathways and Course Structure
Courses in Structural Systems (DD) Construction Technologies Career Field Pathways and Course Structure PATHWAY COURSES SUBJECT CODE Construction Technology-Core and Sustainable Construction 1 178000 Carpentry
Joist. Reinforcement. Draft 12/7/02
Joist Reinforcement Draft 12/7/02 1 JOIST REINFORCING The purpose of this CSD Design Aid is to provide procedures and suggested details for the reinforcement of open web steel joists. There are three basic
CITY OF TRAIL MEMORANDUM
0 C CITY OF TRAIL MEMORANDUM DATE: TO: FROM: SUBJECT: March 24, 2011 FILE NO. 5400-02 DAVID PEREHJJDOFF, CHIEF ADM1NTSTRATIVE OFFICER WARREN PROULX, ENGINEERING TECHMCIAN OLD TRAIL BRIDGE With the interest
SECTION 02845 GUARDRAILS
SECTION 02845 GUARDRAILS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals necessary and repair, replace or install all types of guardrails as specified herein
Bracing Webs in Trusses that have Dissimilar Configurations
Bracing Webs in Trusses that have Dissimilar Configurations Released April 25, 2006 Issue: Truss Design Drawings (TDD) that are prepared in accordance with ANSI/TPI 1, National Design Standard for Metal
STRUCTURAL STEEL DESIGN AND CONSTRUCTION. Gary S. Berman, PE GREYHAWK North America, LLC. GREYHAWK North America, LLC
STRUCTURAL STEEL DESIGN AND CONSTRUCTION by Gary S. Berman, PE GREYHAWK North America, LLC Table of Contents GLOSSARY 3 I. INTRODUCTION TO STEEL DESIGN AND CONSTRUCTION 8 II. THE STEEL PROCESS FROM DESIGN
Steel, Diagrid, Stability Systems, Architecturally Exposed Structural Steel
DIAGRIDS, THE NEW STABLITY SYSTEM: COMBINING ARCHITECTURE WITH ENGINEERING Terri Meyer Boake tboake@uwaterloo.ca School of Architecture, University of Waterloo, Cambridge, ON, Canada Abstract Diagonalized
BCIT. CNST 1100 Construction Safety Officer Training. Lesson Plan
BCIT CNST 1100 Construction Safety Officer Training Lesson Plan BCIT Two Week Outline- CNST 1100 (Please note there may be adjustments made to this outline) Monday- Day #1 Week #1 0730 Paperwork Introductions
CONSTRUCTION OF THE HOOVER DAM BYPASS BRIDGE Updated 29 May 2009
CONSTRUCTION OF THE HOOVER DAM BYPASS BRIDGE Updated 29 May 2009 www.maximumreach.com 1,600 FT. SOUTH OF THE DAM 900 FT. ABOVE WATER 2000 FT. LONG COMPLETION DATE: November 2010 Artists conception of the
How To Build The Burj Dubai Tower
Burj Dubai Tower History Rising Burj Dubai Tower History Rising 2003 All rights reserved. 1 Burj Dubai Tower History Rising Burj Dubai Tower Introduction Architecture Structure Sustainability Issues Construction
Application for a Window Replacement Master Plan Curtis B. Wayne, Architect Ken Lustbader, Preservation Consultant
Application for a Window Replacement Master Plan Curtis B. Wayne, Architect Ken Lustbader, Preservation Consultant 37 West 12 th Street Between 5 th and 6 th Avenues Architectural History Architectural
MIDDLE EAST TECHNICAL UNIVERSITY DEPARTMENT OF ARCHITECTURE / BUILDING SCIENCE PROGRAM
MIDDLE EAST TECHNICAL UNIVERSITY DEPARTMENT OF ARCHITECTURE / BUILDING SCIENCE PROGRAM BS 536 STUDIES ON TALL BUILDINGS: DESIGN CONSIDERATIONS Fall 2011-2012 Case Study: International Commerce Centre by
US 51 Ohio River Bridge Engineering and Environmental Study
US 51 Ohio River Bridge Engineering and Environmental Study ITEM NOS. 1-100.00 & 1-1140.00 Prepared by: Michael Baker Jr., Inc. 9750 Ormsby Station Rd Louisville, KY 40223 August 16, 2013 Table of Contents
David C. Barrow Elementary School 100 Pinecrest Drive, Athens, GA 30605
David C. Barrow Elementary School 100 Pinecrest Drive, Athens, GA 30605 Winner of the 2014 Cold-Formed Steel Engineers Institute (CFSEI) Design Excellence Award May 2014 The David C. Barrow Elementary
Tekla Structures More than a detailing tool. Precast concrete
Tekla Structures More than a detailing tool Precast concrete Much more Than a detailing tool a Tekla Structures is much more than design and detailing software: it is the most accurate and comprehensive
Specifications. Preformed Metal Wall and Roof Panels. Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023
Specifications Preformed Metal Wall and Roof Panels Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023 Section 07410 Preformed Metal Wall and Roof Panels Structural
Thermal Stress & Strain. 07 Thermal Stress and Strain Copyright G G Schierle, 2001-05 press Esc to end, for next, for previous slide 3
Thermal Stress & Strain 07 Thermal Stress and Strain Copyright G G Schierle, 2001-05 press Esc to end, for next, for previous slide 3 Thermal Stress & Strain 07 Thermal Stress and Strain Copyright G G
Vertex BD. Leading Software Solution for Cold Formed Steel Construction
Vertex BD Leading Software Solution for Cold Formed Steel Construction Architectural Design Framing Engineering Detailing Production One Tool Does It All Leading Software for CFS Construction Vertex BD
Design and Build a Model Truss Bridge
#5 Learning Activity #5: Design and Build a Model Truss Bridge Overview of the Activity In this learning activity, we will design, build, and test a model truss bridge. We will analyze the Owner s needs,
Construction Notification and Start-Up
The University of British Columbia Land and Building Services Prepared by: Frank Geyer Work Procedure Approved by: David Barnes Construction Notification and Start-Up Issue Date: 08 October 2002 Replaces:
DESIGN OF BLAST RESISTANT BUILDINGS IN AN LNG PROCESSING PLANT
DESIGN OF BLAST RESISTANT BUILDINGS IN AN LNG PROCESSING PLANT Troy Oliver 1, Mark Rea 2 ABSTRACT: This paper provides an overview of the work undertaken in the design of multiple buildings for one of
NAFS and The 2012 Building Code
NAFS and The 2012 Building Code Presented to BCBEC on 2013-04-18 Al Jaugelis B.Sc. Arch. ajaugelis@rdhbe.com NAFS changes everything... No more ABC s New concepts New terminology New rating system New
Ironworkers. An employment guide for newcomers to British Columbia
Contents 1. What Would I Do?... 2 2. Am I Suited For This Job?... 3 3. What Are The Wages And Benefits?... 3 4. What Is The Job Outlook In BC?... 4 5. How do I become an Ironworker?... 5 6. How Do I Find
Discipline: Structural Issued 04-26-06
California Department of General Services. Division of the State Architect. Product Acceptance Report STRUCTURAL SHEAR PANEL SURE-BOARD SERIES 200 PANELS PA-132 Discipline: Structural Issued 04-26-06 This
Elegance SC. Solar Control
Elegance SC Solar Control Sapa Building System Building Understanding In an age of global warming, the reduction of carbon emissions is a key factor when both selecting materials for a building and how
SEISMIC UPGRADE OF OAK STREET BRIDGE WITH GFRP
13 th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 3279 SEISMIC UPGRADE OF OAK STREET BRIDGE WITH GFRP Yuming DING 1, Bruce HAMERSLEY 2 SUMMARY Vancouver
Structural Engineering: Assurance for Your Insurance
Page 1 of 5 Structural Engineering: Assurance for Your Insurance The common goal on any log home/timber frame design and construction is to have a client s experience that is built on trust and understanding.
WATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS:
WATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS: BY WILLIAM D. SMITH Figure 1 Four Corporate Center, Franklin, TN. Architect: Little & Associates,Charlotte, NC. Gen. Contractor: Ray Bell Const. Co., Nashville,
Aluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
MULTI-RESIDENTIAL BUILDING SOLUTIONS
MULTI-RESIDENTIAL BUILDING SOLUTIONS OUR EXPERTISE AT YOUR SERVICE Canam has been offering owners, real estate developers, architects, engineers and contractors an array of construction solutions since