MapInfo Universal Translator User Guide
|
|
|
- Shanna Lambert
- 8 years ago
- Views:
Transcription
1 MapInfo Universal Translator User Guide The MapInfo Universal Translator translates files in MapInfo formats to several different spatial data formats and translates files from several formats into MapInfo.TAB files. The Universal Translator or (IMUT Invoked MapInfo Universal Translator), is typically run as a tool under MapInfo Professional's Tools Menu, but can also be run manually in a MapBasic window, using another language program, or in batch-file mode. This User Guide describes both processes in detail. Sections in this Guide: Introduction to the MapInfo Universal Translator Using the Translator from within MapInfo Professional Using the Universal Translator From the Command Line Importing Data Using the Command Line Exporting Data Using the Command Line Safe Software, Inc.
2 Introduction to the MapInfo Universal Translator Introduction to the MapInfo Universal Translator The Universal Translator can translate these file formats into MapInfo.TAB and.mif\.mid files: AutoCAD DWG/DXF ESRI ArcInfo Export (E00) ESRI Shapefile MicroStation Design Spatial Data Transfer Standard (SDTS) The Universal Translator can translate MapInfo.TAB and.mif\.mid files into these Vector Product Format Coverage (VPF) formats: AutoCAD DWG/DXF ESRI ArcInfo Export (E00) ESRI Shapefile MicroStation Design Using the Translator from within MapInfo Professional If you are working in MapInfo Professional you can use the Universal Translator to convert files from its existing format into a MapInfo.TAB file or.mif/.mid file or from.tab file format into other vector product formats. Loading the Universal Translator into the Tool Manager To use the Universal Translator from within MapInfo Professional, first you have to load it into the Tool Manager. Usually, the Universal Translator is preloaded when you install MapInfo Professional, but you can load it manually from the Tools menu. To load the Universal Translator to the Tool Manager menu: 1. From the MapInfo Professional Main menu choose Tools > Tool Manager. The Tool Manager dialog box displays. 2 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
3 MapInfo Universal Translator User Guide 2. Scroll down the Tools list and do one of the following: If the Universal Translator is not in the list, go to step 3. If the Universal Translator is in the list, scroll down to the entry and go to step Click the Add Tool button and the Add Tool dialog box displays. 4. Type Universal Translator into the Description field. 5. Beside the Location field, click the button. Using the Select MapBasic Program dialog box, search for the MUT.MBX file in the \UT folder within your installation directory. When you find it, select it and click Open. 6. Click OK to add the Universal Translator to the Tool Manager window. 7. To load the Universal Translator for this session only, select the checkbox in the Load column. To load the Universal Translator each time you open MapInfo Professional, select the AutoLoad checkbox. Both checkboxes can be selected. 8. Click OK to save your entries. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
4 Using the Translator from within MapInfo Professional Using the Universal Translator To run the Universal Translator: 1. Choose Tools > Universal Translator > Universal Translator to display the Universal Translator dialog box. 2. In the Source box, use the Format drop-down list to display a list of formats and select the source format for the dataset that you want to translate. When the format of the input dataset is MicroStation Design, the Settings button enables. Click this button to display the Design File Input Settings dialog box. Choose the appropriate coordinate units. 3. Type the name(s) of the files you want to translate or select to search for the source files and click Open to return to the Universal Translator dialog box. Note: When you select AutoCAD, the translator defaults to DWG format. If you select AutoCAD files, ArcInfo files, Shapefiles, MicroStation Design files, or Vector Product Format files from the Format drop-down list, the Projection button enables. Use this button to display the Choose Projection list and set a specific projection for the input file. The projection files that display in the Choose Projection list are from the MapInfo Projection mapinfow.prj file. If the appropriate projection entry does not display in this list, you can make a custom matching projection entry beforehand in this file (see the MapInfo Professional User Guide for more detail). If you select the wrong projection, you may get erroneous results. Please contact the vendor or original creator of this data to obtain descriptive information\metadata concerning the projection\coordinate system used in the input files to translate them correctly into MapInfo format. Note: An additional Use Projection setting in source file checkbox displays when you select Shapefiles as a source. When you select this checkbox, the Translator looks for the projection setting in the projection file and uses it for the translation. 4 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
5 MapInfo Universal Translator User Guide 4. In the Destination box, select the format into which you would like to translate the selected file(s) in the Format drop-down list. If you select the ArcInfo format, a Settings button displays. Click this button to select Coverage Precision and Compression options for the translated file. If you select a MicroStation Design format, you can select the version number for the translated file you are creating. Note: When translating a file into a MapInfo.TAB file, the translation creates version 3.0 MapInfo tables; if the translation encounters a feature unique to a later version of MapInfo Professional, the version is designated as edited in that later version. 5. In the Directory field, enter the destination of the translated file(s) or click to indicate the name and path of the destination. Note: If the source file is MapInfo.TAB format, and the destination file is AutoCAD, a Settings button displays. Click to display the AutoCAD Output Settings dialog box and select the appropriate AutoCAD file version from the list. In this case, you also select the whether the output should be DWG or DXF. 6. Set up the log file. The Universal Translator automatically creates a log file to document the translation process. If the translation fails, you should first look at the log to determine the cause of failure. a. Enter a name and location for this log file in the Log to File field. The default is C:\temp\mutlog.txt. You can also select the for this log file. button to choose another name and/or path b. To add to an existing log file, select the Append to Log checkbox. This adds the log entries from the translation to the end of the previous log entry. When you do not select this checkbox, the Universal Translator overwrites the previous log entries. This step is not required. Note: To view the existing log, click View Log. 7. Click OK to begin the translation process. For more information about the Universal Translator dialog box, see Understanding the Universal Translator Dialog Box in the next section. There is more detail in the Universal Translator Help System about the other dialog boxes discussed in this section. Use these descriptions to guide you through the intracacies of the translation process. Press the F1 Help key on your keyboard to display help for the active Universal Translator dialog box. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
6 Using the Translator from within MapInfo Professional Understanding the Universal Translator Dialog Box The fields in the Universal Translator dialog box are described more fully in this section. Source Format Use the FORMAT drop-down list to display a list of formats. Select the Source Format for the dataset that you want to translate. When the format of the input dataset is MicroStation Design, the SETTINGS button is enabled. Click this button to display the Design File Input Settings dialog box. Choose the appropriate co-ordinate units: Master Sub UOR File(s) Enter the file(s) to be translated or click to display the Select Input Files dialog box. Choose the file(s) from the Select Input dialog box. When you select AutoCAD, the system defaults to DWG format. Use projection setting in source file This option is available when you select the Shapefile format. Select this checkbox to have the Universal Translator look automatically for a matching MapInfo projection from the Shapefile's associated *.prj file, if one exists in the same directory, and create the.tab/.mif file in that projection. You can make a custom matching projection entry beforehand in the mapinfow.prj file if one does not exist, (see the MapInfo Professional User Guide for more detail). If you do not select this checkbox, the.tab/.mif file is created in a Non-Earth, meters system by default, or another projection by clicking on the Projection button and selecting the correct projection to apply to the translated.tab or.mif/.mid file. Projection button Available when you have selected a Shapefile. Displays the Choose Projection dialog box. Select the correct projection to apply to the translated.tab or.mif/.mid file. Coordinate System button If you have selected a MapInfo.TAB,.MIF\.MID, or SDTS format file, "Read from Source" displays since these files contain coordinate system information. If you have selected Shapefile, AutoCAD, Intergraph, or VPF files, designate the coordinate system; if you do not designate a coordinate system, the Universal Translator defaults to Non-Earth, meters. Note: If you designate the wrong coordinate system, errors may occur. Please contact the vendor or original creator of this data to obtain descriptive information\metadata concerning the projection\coordinate system used in the input files to translate them correctly into MapInfo format. Choose to display the Choose Projection dialog box. Category Choose a projection from the Category drop-down list. Category Members Choose the appropriate coordinate unit from the Category Members drop-down list. 6 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
7 MapInfo Universal Translator User Guide Destination Format Select the format of the translated file. Note: When translating into MapInfo.TAB, the translation creates version 3.0 MapInfo tables; if the translation encounters a feature unique to MapInfo 4.5, the version is designated as edited Version 4.5. Directory Enter the destination of the translated file or click designate the name and path of the destination file. to display the Select Directory dialog box and If the source file is MapInfo format, and the destination file is AutoCAD, a Settings button displays. Click this button to display the AutoCAD Output Settings dialog box and select the appropriate version of AutoCAD. Log The Universal Translator automatically creates a log file documenting the translation process. Should the translation fail, you should first look at the log to determine the cause of failure. Log to File Specify a filename and location for the Log file. The default is C:\temp\mutlog.txt. Click designate another name/path for the log file. Append to Log When you select this button, the log entries resulting from the next translation append to the previous one. When this button is cleared, a new log is created, overwriting the previous log entries. Field level detail on other dialog boxes is available in the Help System. to Some Notes About Using the Universal Translator To produce successful results, the data you are converting must be in the language of the system you are using This version is double-byte enabled; contains support for the latest Shape file format; updated AutoCAD metafiles and updated Intergraph metafiles The Universal Translator does not officially support 3-dimensional Intergraph DGN or 3 dimensional AutoCAD DWG/DXF files; the translation results using these files are unpredictable Unlike MapInfo's import DXF, the Universal Translator does not perform coordinate transformations When translating DWG/DXF to.tab/.mif, the Universal Translator does not translate AutoCAD meshes When translating DWG/DXF or DGN, the translator does not attempt to match display attributes, including line color, font type. Universal Translator does support UNC paths When translating from Shapefiles to.tab files, the Universal Translator defaults empty fields to the following: a. Empty numeric field with a width of one translates to a 0 (zero) b. Empty numeric field with a width of two translates to -9 c. Empty numeric field with a width of three translates to -99 User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
8 Using the Universal Translator From the Command Line d. Empty numeric field with a width of four translates to -999 e. Empty numeric field with a width of five or greater translates to A single file translation may result in multiple files depending on file types. Virtual Memory: When translating to or from DWG/DXF, it is possible to encounter a lack of virtual memory. An error message displays indicating this problem. Using the Universal Translator From the Command Line Below are the syntax and parameter descriptions for running Universal Translator in this commandline mode. Only the parameters that are supported and tested by MapInfo are included in the descriptions below. Any other command-line parameters not listed are unsupported, and assistance with these should be obtained from SAFE Software, Inc. The Universal Translator uses syntax from Full FME translator but SAFE Software. The commands used in the examples below expose the same functionality that is obtained via the Universal Translator GUI provided with MapInfo Professional. Examples of its use in MapBasic programming language are also provided if you need them. Note that in all the examples provided, the path names are to be replaced by something actually present on a user system. In addition, each place where MAPINFO is present in the command line can be replaced by.mif if.mif files are required instead of native.tab files. The command line examples also assume a DOS prompt that is running from the directory holding the IMUT.exe executable. In addition, all the parameters should be placed in one continuous line for each command to be executed. Translations are performed in two stages. The application: 1. Generates a semantic control or mapping file script that controls the translation. 2. Runs the translation using this generated mapping file. Important syntax notes: Any options given as YES can also be specified as NO to turn off the behavior. The DESTDATASET indicates where the output is to be written, and the SOURCEDATASET controls where the input is read from. Log files can be generated from each stage. Embedded quotes such as MapInfo CoordSys clauses need to be passed with escape characters such as this example: CoordSys Earth Projection 10, 104, \"m\", 0** In MapBasic, a CoordSys string containing a specific map unit can be passed like this to IMUT:"CoordSys Earth Projection 10, 104," + chr$(92) + chr$(34) + "m" + chr$(92)+ chr$(34)+ ", 0"** Uses ASCII character codes chr$(92) for the \ character and chr$(34) to embed quoted strings. 8 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
9 MapInfo Universal Translator User Guide Importing Data Using the Command Line This section provides details for importing data into MapInfo Professional from other data source formats. Note: Important: In this document we only cover the features that are used in MapInfo Professional s Universal Translator MBX. If you use command line parameters other than those documented here, MapInfo Corporation has not tested and does not support them. Support for those command-line parameters and for any unexpected results that occur need to be obtained from SAFE Software, Inc. Importing Data from AutoCAD DWG and DXF Formats Follow these steps to import data from AutoCAD DWG and DXF formats into a MapInfo.TAB file from the command line. Step 1) Generating the Mapping File Imut.exe CFGenerate autocadscan MAPINFO "D:\test.dwg" "C:\Temp\mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt LOG_APPEND NO --Source_ EXPAND_BLOCKS "yes" --Source_ATTR "autocad_attributes" --Source_ATTRKIND "extended_ entity_data" --LAYERBASENAME "test" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from the DOS prompt, so path to it should be set. CFGenerate Command that generates a semantic control file autocadscan Input format is AutoCAD format file. MAPINFO Output format is MapInfo.TAB. If the output file format is.mif\.mid, then use.mif. "D:\test.dwg" Path and filename of the input AutoCAD file. "C:\Temp\mapping.fme" Path and filename of the semantic control file can be prefixed with any name. LOG_STANDARDOUT Generates a text log file during the translation (Yes or No). LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. Source_EXPAND_BLOCKS By default the Universal Translator expands blocks in AutoCAD files (Yes or No) Default is Yes. Source_ATTR "autocad_attributes" handles AutoCAD attributes Source_ATTRKIND "extended_entity_data" handles extended entities in AutoCAD files. LAYERBASENAME Optional prefix added to all resulting.tab filenames. Note: **The LAYERBASENAME argument is a prefix which is added to all resulting MapInfo table names, and is optional. Typically it is the root name of the source DWG file. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
10 Using the Universal Translator From the Command Line Step 2) Running the Mapping File to Perform the Translation Imut.exe "C:\Temp\mapping.fme" --SourceDataset D:\test.dwg --DestDataset C:\output --_ EXPAND_BLOCKS yes --_ATTRKIND extended_entity_data --_EXTENSION dwg --_BASENAME test --_FULLBASENAME test MAPINFO_COORDSYS_STATEMENT CoordSys Earth Projection 10, 104, \"m\", 0 Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset D:\test.dwg Path and filename of the input file to be translated. DestDataset C:\output Path and folder name of the output to be generated. _EXPAND_BLOCKS Same as --Source_EXPAND_BLOCKS above (Yes or No). _ATTRKIND Same as --Source_ATTRKIND above (extended_entity_data ). _EXTENSION Input format extension (DWG or DXF are valid AutoCAD format extensions) Case insensitive. _BASENAME Name of output file to be generated can be same as LAYERBASENAME. _FULLBASENAME Can be same as LAYERBASENAME MAPINFO_COORDSYS_STATEMENT Optional parameter The CoordSys Clause applied to result TAB\MIF\MID file. IMUT will not re-project data being translated into a different coordinate system\projection, it applies the CoordSys clause passed to the result TAB\MIF file. Make sure the CoordSys used is appropriate for the data being translated. The output TAB\MIF file will default to the projection specified in the Shape file s *.prj file (if it exists in same directory) or to Non-Earth/ meters if no CoordSys clause is passed and no.shp file *.prj file exists. Importing Data from the MicroStation DGN Format Step 1) Generating the Mapping File Imut.exe Generate design.mif "C:\test.dgn" "C:\Temp\mapping.fme" LOG_STANDARDOUT YES -- Source_IGDS_MSLINKS "no" --Source_XPNDCELL "yes" --Source_PRESERVE_CELL_INSERTS "no" --SourceSPLIT_MULTITEXT "yes" --Source_PROPAGATE "no" --Source_DROP_COMPLEX "no" --Source_TEXTTAGS "yes" --Source_IN_UNITS "IGDS_MASTER_UNITS" --Source_USE_ LEVEL_NAMES "no" +MERGE_SCHEMAS YES Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so path to it should be set. Generate Universal Translator command that generates a semantic control file. design Input format set to MicroStation. DGNMAPINFO Output format set to MapInfo.TAB. If.MIF\.MID output needed, then use ".MIF". "C:\test.dgn" Path and filename of input MicroStation DGN file. "C:\Temp\mapping.fme" Path and name of the semantic mapping\control file. 10 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
11 MapInfo Universal Translator User Guide LOG_STANDARDOUT Output a text logfile of translation (Yes or No) use with LOG_FILENAME parameter to create the file. LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. Source_IGDS_MSLINKS Supports MSLINKS in DGN files (Yes or No). Source_XPNDCELL Expands Cell Elements (Yes or No) Source_PRESERVE_CELL_INSERTS Preserves cell insert points (Yes or No) if Cell Elements are expanded only. SourceSPLIT_MULTITEXT Splits multi Text (Yes or No) Default is Yes. Source_PROPAGATE Propagates the chain member linkages (Yes or No) applied when not dropping complex elements. Source_DROP_COMPLEX Drops complex chains while reading (Yes or No) Default is No. Source_TEXTTAGS Tags elements output as text when reading source file (Yes or No) - Default is Yes. Source_IN_UNITS Controls how all the FME coordinates read from the design file are interpreted. Valid values are: IGDS_MASTER_UNITS FME coordinates are treated as Master Units DEFAULT. IGDS_SUB_UNITS FME coordinates are treated as Sub Units. IGDS_UORS FME coordinates are treated as UORs. Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme --SourceDataset C:\test.dgn --DestDataset C:\output --_ XPNDCELL yes --_IN_UNITS IGDS_MASTER_UNITS --_EXTENSION dgn --_BASENAME filename --_FULLBASENAME filename MAPINFO_COORDSYS_STATEMENT "CoordSys Earth Projection 11, 104, \"m\", 0" Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset D:\test.dgn Path and filename of the input file to be translated. DestDataset C:\output Path and folder name of the output to be generated. _XPNDCELL Same as --Source_XPNDCELL parameter in Step 1. (Yes or No). _IN_UNITS Same as --Source_IN_UNITS parameter in step 1. (Default is IGDS_MASTER_ UNITS). _EXTENSION Format extension of the input file (DGN) _BASENAME Name of the output file to be generated can be same as LAYERBASENAME. _FULLBASENAME Can be same as LAYERBASENAME MAPINFO_COORDSYS_STATEMENT Optional parameter The CoordSys Clause applied to the resulting.tab\.mif\.mid file. The Universal Translator does not re-project data being translated into a different coordinate system\projection, it applies the CoordSys clause passed to User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
12 Using the Universal Translator From the Command Line the resulting.tab\.mif file, so make sure the coordinate system you use is appropriate for the data being translated. If no CoordSys clause is passed, the output.tab\.mif file defaults to Non- Earth, meters. Importing Data from the E00 Format Step 1) Generating the Mapping File Imut.exe CFGenerate E00 MAPINFO "C:\temp\polygon.e00" "C:\Temp\mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt" LOG_APPEND "NO" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from DOS prompt, so path to it should be set. CFGenerate Command that generates a semantic control file E00 Input format set to ArcInfo Export Format MAPINFO Output format set to MapInfo.TAB. If.MIF\.MID output is needed, then use ".MIF". "C:\temp\polygon.e00" Path and filename of the input ArcInfo.E00 file. "C:\Temp\mapping.fme" Path and name of the semantic mapping\control file. LOG_STANDARDOUT Outputs a text logfile of translation (Yes or No) use with LOG_ FILENAME parameter to create a file. LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme --SourceDataset "C:\temp\polygon.e00" --DestDataset C:\temp -- _EXTENSION e00 --_BASENAME polygon --_FULLBASENAME polygon MAPINFO_COORDSYS_ STATEMENT "CoordSys Earth Projection 1, 104" Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset c:\temp\polygon. e00 Path and filename of the input file to be translated. DestDataset C:\temp Path and folder name of the output to be generated. _EXTENSION Format extension of the input file (.E00) _BASENAME Name of the output file to be generated can be same as LAYERBASENAME. _FULLBASENAME Can be same as LAYERBASENAME MAPINFO_COORDSYS_STATEMENT Optional parameter The CoordSys Clause applied to the resulting.tab\.mif\.mid file. The Universal Translator does not re-project data being translated into a different coordinate system\projection. It applies the CoordSys clause passed to 12 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
13 MapInfo Universal Translator User Guide the resulting.tab\.mif file, so make sure the CoordSys used is appropriate for the data being translated. If no CoordSys clause is passed, the output.tab\.mif file defaults to Non-Earth, meters. Importing Data from the Shapefile Format Step 1) Generating the Mapping File Imut.exe CFGenerate SHAPE MAPINFO "C:\temp\poly.shp" "C:\Temp\mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt" LOG_APPEND "NO" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so path to it should be set. CFGenerate Command that generates a semantic control file SHAPE Input format set to ESRI Shapefile format. MAPINFO Output format set to MapInfo.TAB. If.MIF\.MID output needed, then use ".MIF". "C:\temp\poly.shp" Path and filename of the input ESRI Shapefile. "C:\temp\mapping.fme" Path and name of the semantic mapping\control file. LOG_STANDARDOUT Outputs a text logfile of translation (Yes or No) use with LOG_ FILENAME parameter to create the file. LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of the logfiles in subsequent translations (Yes or No) Default is No. Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme --SourceDataset C:\temp\poly.shp --DestDataset C:\temp --_ EXTENSION shp --_BASENAME filename--_fullbasename filename Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset c:\temp\poly.shp Path and filename of the input file to be translated. DestDataset C:\temp Path and folder name of output to be generated. _EXTENSION Format extension of input file (Shapefile) _BASENAME Name of output file to be generated can be same as LAYERBASENAME. _FULLBASENAME Can be same as LAYERBASENAME User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
14 Using the Universal Translator From the Command Line MAPINFO_COORDSYS_STATEMENT Optional parameter The CoordSys Clause applied to resulting.tab\.mif\.mid file. The Universal Translator does not re-project data being translated into a different coordinate system\projection. The output TAB\MIF file will default to the projection specified in the Shape file s *.prj file (if it exists in same directory) or to Non-Earth/meters if no CoordSys clause is passed and no SHP file *.prj file exists. Importing Data from the SDTS Format Step 1) Generating the Mapping File Imut.exe Generate SDTS MAPINFO "C:\Temp\TR01CATD.DDF" "C:\Temp\mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt" LOG_APPEND "NO" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so path to it should be set. Generate Command that generates a semantic control file SHAPE Input format set to Spatial Data Transfer Standard (SDTS). MAPINFO Output format set to MapInfo.TAB. If.MIF\.MID output is needed, then use ".MIF". "C:\temp\TR01CATD.DDF" Path and filename of the SDTS archive to be translated (****CATD.DDF). "C:\temp\mapping.fme" Path and name of the semantic mapping\control file. LOG_STANDARDOUT Outputs a text logfile of translation (Yes or No) use with LOG_ FILENAME parameter to pump it out to a file. LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme --SourceDataset C:\Temp\TR01CATD.DDF --DestDataset C:\Temp Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset C:\Temp\TR01CATD.DDF Path and filename of the input file from SDTS archive to be translated. DestDataset C:\temp Path and folder name of the output to be generated. **MAPINFO_COORDSYS_STATEMENT is not used, the CoordSys is read directly from input SDTS file. 14 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
15 MapInfo Universal Translator User Guide Importing Data from the VPF Format Step 1) Generating the Mapping File Imut.exe Generate VPF MAPINFO "C:\input\NAV" "C:\Temp\mapping.fme" LOG_STANDARDOUT YES LOG_FILENAME "C:\Temp\Mutlog.txt" LOG_APPEND "NO" +ID "BUOYBCNP" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from DOS prompt, so the path to it should be set. Generate Command that generates a semantic control file VPF Input format set to Vector Product format (VPF). MAPINFO Output format set to MapInfo.TAB. If.MIF\.MID output is needed, then use ".MIF" "C:\input\NAV" Path and folder of the VPF archive to be translated. "C:\temp\mapping.fme" Path and name of the semantic mapping\control file. LOG_STANDARDOUT Outputs a text logfile of translation (Yes or No) use with LOG_ FILENAME parameter to create a file. LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. +ID "BUOYBCNP" Layer Name (ID) of the VPF archive to be translated. Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme --SourceDataset C:\input\NAV --DestDataset C:\output MAPINFO_COORDSYS_STATEMENT "CoordSys Earth Projection 1, 104" Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset C:\input\NAV Path and folder name of the VPF archive to be translated. DestDataset C:\output Path and folder name of the output to be generated. MAPINFO_COORDSYS_STATEMENT Optional parameter The CoordSys Clause applied to resulting.tab\.mif\.mid file. The Universal Translator does not re-project data being translated into a different coordinate system\projection. It applies the CoordSys clause passed to the resulting.tab\.mif file, so make sure the CoordSys used is appropriate for the data being translated. If no CoordSys clause is passed, the output.tab\.mif file defaults to Non-Earth, meters. Note: VPF data is typically created in Longitude\Latitude (WGS84). User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
16 Using the Universal Translator From the Command Line Exporting Data Using the Command Line This section provides details for exporting data from MapInfo Professional to other data formats. Exporting Data to DWG or DXF Format Step 1) Generating the Mapping File Imut.exe CFGenerate MAPINFO DWG "D:\MapInfo\Regions.tab" "C:\temp\mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\temp\mutlog.txt" LOG_APPEND "NO" --Dest_ATTR "autocad_attributes" --Dest_ATTRKIND "extended_entity_data" --Dest_REL "Release2000" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so the path to it should be set. CFGenerate Command that generates a semantic control file MAPINFO Input format is MapInfo.TAB. If the input file has a.mif\.mid extension, then use.mif. DWG Output format is AutoCAD DWG format. If an AutoCAD DXF format is needed use "DXF". "D:\MapInfo\Regions.tab" Path and filename of the input MapInfo.TAB or.mif\.mid file. "C:\Temp\mapping.fme" Path and filename of the semantic control file can be prefixed any name. LOG_STANDARDOUT Generates a text log file during the translation (Yes or No). LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of the logfiles in subsequent translations (Yes or No) Default is No. Dest_ATTR "autocad_attributes" Creates AutoCAD attributes in the output file. Dest_ATTRKIND "extended_entity_data" Creates extended entities in AutoCAD files. Dest_REL "Release2000" Release version of the AutoCAD file to be created. Note: The Dest_REL parameter may be any one of these: Release11, Release12, Release13, Release14, Release2000, or Release2004. *** AutoCAD Release 2002 format is same as Release 2000, and AutoCAD Release 2005 is same as Release Step 2) Running the Mapping File to Perform the Translation Imut.exe C:\Temp\mapping.fme SourceDataset "D:\MapInfo\Regions.tab" --DestDataset C:\temp\output.dwg --_ATTRKIND extended_entity_data --_REL Release _EXTENSION TAB --_BASENAME Regions --_FULLBASENAME Regions Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. 16 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
17 MapInfo Universal Translator User Guide "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset D:\MapInfo\Regions.tab Path and filename of the MapInfo.TAB file to be translated. DestDataset C:\temp\output.dwg Path and folder name of the output AutoCAD file to be generated. _ATTRKIND extended_entity_data Creates the extended entities in AutoCAD files. _REL Release2000 Creates a release 2000 AutoCAD file. See notes above on valid release versions. _EXTENSION TAB Input format extension (TAB or.mif only). _BASENAME Name of the output file to be generated. Can be the same as input filename. _FULLBASENAME Can be the same as input filename *** MapInfo CoordSys is not needed because the CoordSys is read directly from.tab or.mif file. Exporting Data to the E00 Format Step 1) Generating the Mapping File Imut.exe CFGenerate MAPINFO E00 "D:\MapInfo\Regions.tab" "C:\Temp\Mapping.fme" LOG_ STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt" LOG_APPEND "NO" --Dest_ PRECISION "Double" --Dest_COMPRESSION "NONE" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so the path to it should be set. CFGenerate Command that generates a semantic control file MAPINFO Input format is MapInfo.TAB. If the input format is.mif\.mid, then use.mif. E00 Output format is the ArcInfo Export format. "D:\MapInfo\Regions.tab" Path and filename of the input MapInfo.TAB or.mif\.mid file. "C:\Temp\mapping.fme" Path and filename of the semantic control file. Can be prefixed by any name. LOG_STANDARDOUT Generates a text log file during the translation (Yes or No). LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No) Default is No. Dest_PRECISION Precision of the.e00 file produced, may be "Single" or "Double" Default is "Double". Dest_COMPRESSION Compression of the.e00 file - can be "FULL", "PARTIAL", or "NONE". Default is NONE. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
18 Using the Universal Translator From the Command Line Step 2) Running the Mapping File to Perform the Translation Imut.exe "C:\Temp\mapping.fme" --SourceDataset "D:\MapInfo\Regions.tab" --DestDataset C:\Temp\output --_PRECISION Double --_COMPRESSION NONE --_EXTENSION TAB --_ BASENAME Regions --_FULLBASENAME Regions Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\TEMP\MAPPING.FME" Path and filename of the semantic control file generated in step 1. SourceDataset "D:\MapInfo\Regions.tab" Path and filename of the MapInfo.TAB file to be translated. DestDataset C:\Temp\output Path and folder name of the output.e00 file to be generated. _PRECISION Internal precision of the export file, can be Single or Double. Default is Double. _COMPRESSION Compression factor of the resulting.e00 file, can be "FULL", "PARTIAL", or "NONE". Default is NONE. _EXTENSION Input extension set to MapInfo.TAB. If the input extension is.mif\.mid use.mif _BASENAME Name of the output file to be generated can be the same as input filename _FULLBASENAME Can be same as the input filename *** MapInfo CoordSys is not needed - The CoordSys is read directly from.tab or.mif file. Exporting Data to a Shapefile Format Step 1) Generating the Mapping File Imut.exe CFGenerate MAPINFO SHAPE "D:\MapInfo\Regions.tab" "C:\Temp\Mapping.fme" LOG_ STANDARDOUT YES LOG_FILEN Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from the DOS prompt, so path to it should be set. CFGenerate Command that generates a semantic control file MAPINFO Input format is MapInfo.TAB. If the input format is.mif\.mid, then use.mif. SHAPE Output format is the ESRI Shapefile format. "D:\MapInfo\Regions.tab" Path and filename of the input MapInfo.TAB or.mif\.mid file. "C:\Temp\mapping.fme" Path and filename of the semantic control file can be prefixed any filename. LOG_STANDARDOUT Generates a text log file during the translation (Yes or No). LOG_FILENAME Path and filename of the logfile to be generated. 18 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
19 MapInfo Universal Translator User Guide LOG_APPEND Appends the results of the logfiles in subsequent translations (Yes or No), Default is No. Step 2) Running the Mapping File to Perform the Translation Imut.exe "C:\Temp\mapping.fme" --HOMOGENOUS_GEOMETRY yes --_SHAPE_FILE_TYPE 2d -- SourceDataset "D:\MapInfo\Regions.tab" --DestDataset C:\Temp\output --_EXTENSION TAB --_ BASENAME Regions --_FULLBASENAME Regions Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. HOMOGENOUS_GEOMETRY Sets the homogenous geometry setting to Yes Default. (Can be Yes or No). MapInfo.TAB\.MIF files can have mixed object types whereas Shapefiles cannot. Setting this option to Yes creates a separate Shapefile containing each supported different object type found in.tab file. _SHAPE_FILE_TYPE Sets the Shapefile type to a 2D, which is the Default. Can also be "2dm" (2 Dimensional with measures) or "3dm" (3 Dimensional with measures). SourceDataset "D:\MapInfo\Regions.tab" Path and filename of the MapInfo.TAB file to be translated. DestDataset C:\Temp\output Path and folder name of the output.e00 file to be generated. _EXTENSION Input extension set to MapInfo.TAB. If the input file is in.mif\.mid format, use.mif _BASENAME Name of the output file to be generated can be the same as input filename _FULLBASENAME Can be the same as input filename *** MapInfo CoordSys is not needed because the CoordSys is read directly from the.tab or.mif file. Exporting Data to the DGN Format Step 1) Generating the Mapping File Imut.exe CFGenerate MAPINFO IGDS "D:\MapInfo\cy.tab "C:\Temp\mapping.fme" LOG_ STANDARDOUT YES LOG_STANDARDOUT YES LOG_FILENAME "C:\Temp\mutlog.txt" LOG_ APPEND "NO" --Dest_TYPE3 "yes" --Dest_OUT_UNITS "IGDS_MASTER_UNITS" --Dest_SEED "C:\Program Files\MapInfo\Professional\Ut\design\seed2d_m_v8.dgn" Understanding the Mapping File Parameters Imut.exe Application name of the MapInfo Universal Translator. Assumes it is running from a DOS prompt, so the path to it should be set. CFGenerate Command that generates the semantic control file MAPINFO Input format is MapInfo.TAB. If the input format is.mif\.mid, then use.mif. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
20 Using the Universal Translator From the Command Line IGDS Output format is MicroStation Design (DGN) file format. "D:\MapInfo\Regions.tab" Path and filename of the input MapInfo.TAB or.mif\.mid file. "C:\Temp\mapping.fme" Path and filename of the semantic control file can be prefixed with any filename. LOG_STANDARDOUT Generates a text log file during the translation (Yes or No). LOG_FILENAME Path and filename of the logfile to be generated. LOG_APPEND Appends the results of logfiles in subsequent translations (Yes or No), Default is No. Dest_TYPE3 Allows type 3 elements to be created for 2 point lines (Yes or No), Default is Yes. Dest_OUT_UNITS How the Universal Translator treats resulting coordinates in a Design file. Valid values are: IGDS_MASTER_UNITS Coordinates are treated as Master Units by default. IGDS_SUB_UNITS Coordinates are treated as Sub Units. IGDS_UORS Coordinates are treated as UORs. Dest_SEED Path and filename of the seed file used by the Universal Translator Note: The MapInfo Universal Translator uses the seed2d_m_v8.dgn seed file set by default to output MicroStation version 8 DGN files. If MicroStation version 7 DGN files are needed, set the seed file to use "seed2d_m.dgn". To create output using other seed files, look in the \design folder supplied by SAFE. However, MapInfo has not tested these other files so the results are unknown and unsupported. Contact SAFE for any issues arising out of their use. The MapInfo Universal Translator is shipped with the following MicroStation Seed files listed in \UT\design folder: bcutm3d.dgn bcutm2d.dgn seed2d_ft.dgn seed2d_ft_v8.dgn seed2d_m_v8.dgn seed2d_m.dgn seed3d_ft.dgn seed3d_ft_v8.dgn seed3d_m.dgn seed3d_m_v8.dgn seed_ll.dgn. Step 2) Running the Mapping File to Perform the Translation Imut.exe "C:\Temp\mapping.fme" SourceDataset "D:\MapInfo\Regions.tab" DestDataset C:\Temp\output.dgn --_TYPE3 YES _OUT_UNITS IGDS_MASTER_UNITS _SEED C:\Program Files\MapInfo\Professional\Ut\design\seed2d_m_v8.dgn _EXTENSION.TAB _BASENAME Regions --_FULLBASENAME Regions 20 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
21 MapInfo Universal Translator User Guide Understanding the Translation Parameters Imut.exe Name of the MapInfo Universal Translator executable. "C:\Temp\mapping.fme" Path and filename of the semantic control file generated in step 1. SourceDataset "D:\MapInfo\Regions.tab" Path and filename of the MapInfo.TAB file to be translated. DestDataset C:\Temp\output.dgn Path and filename of the output DGN file to be generated. _TYPE3 Allows type 3 elements to be created for 2 point lines (Yes or No), Default is Yes. _OUT_UNITS How the Universal Translator handles output DGN file units Default is IGDS_ MASTER_UNITS. See Dest_OUT_UNITS parameter in step 1. _SEED Path and filename of the seed file used by the Universal Translator. See Note for Dest_ SEED parameter in step 1. _EXTENSION Input extension set to MapInfo.TAB. If the input extension is.mif\.mid use.mif _BASENAME Name of the output file to be generated can be the same as input filename _FULLBASENAME Can be the same as the input filename *** MapInfo CoordSys is not needed because the CoordSys is read directly from.tab or.mif file. User Guide MapInfo Corporation. All rights reserved. UT_UG.pdf
22 Using the Universal Translator From the Command Line 22 Universal Translator UT_UG.pdf 2006 MapInfo Corporation. All rights reserved.
Universal Translator 11.0 USER GUIDE
Universal Translator 11.0 USER GUIDE Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. No part of this
Data Interoperability Extension Tutorial
Data Interoperability Extension Tutorial Copyright 1995-2010 Esri All rights reserved. Table of Contents About the Data Interoperability extension tutorial...................... 3 Exercise 1: Using direct-read
Falcon Document Management Software VDOT Training Guide For the Windows Document Manager to be used in conjunction with PowerScope
Falcon Document Management Software VDOT Training Guide For the Windows Document Manager to be used in conjunction with PowerScope Version 1.0 1 The Falcon/DMS Document Manager (Introduction) The Document
Converting GIS Datasets into CAD Format
Ball State University Libraries GIS Research and Map Collection Converting GIS Datasets into CAD Format Author: Angela Gibson, 6/13/2014 Overview: One of the most common requests from students is for GIS
Spatial Database Support
Page 1 of 11 Spatial Database Support Global Mapper can import vector data from and export vector data to the following spatial databases: Esri ArcSDE Geodatabase Esri File Geodatabase Esri Personal Geodatabases
INTRODUCTION to ESRI ARCGIS For Visualization, CPSC 178
INTRODUCTION to ESRI ARCGIS For Visualization, CPSC 178 1) Navigate to the C:/temp folder 2) Make a directory using your initials. 3) Use your web browser to navigate to www.library.yale.edu/mapcoll/ and
Using CAD Data in ArcGIS
Esri International User Conference San Diego, California Technical Workshops July 27, 2012 Using CAD Data in ArcGIS Jeff Reinhart & Phil Sanchez Agenda Overview of ArcGIS CAD Support Using CAD Datasets
TIBCO Fulfillment Provisioning Session Layer for FTP Installation
TIBCO Fulfillment Provisioning Session Layer for FTP Installation Software Release 3.8.1 August 2015 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED
Help File. Version 1.1.4.0 February, 2010. MetaDigger for PC
Help File Version 1.1.4.0 February, 2010 MetaDigger for PC How to Use the Sound Ideas MetaDigger for PC Program: The Sound Ideas MetaDigger for PC program will help you find and work with digital sound
ArcGIS Tutorial: Adding Attribute Data
ArcGIS Tutorial: Adding Attribute Data Introduction A common need in GIS is to map characteristics, or attributes, of different geographic areas. These maps are called thematic maps. Examples of thematic
File Management Utility User Guide
File Management Utility User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held
DiskPulse DISK CHANGE MONITOR
DiskPulse DISK CHANGE MONITOR User Manual Version 7.9 Oct 2015 www.diskpulse.com info@flexense.com 1 1 DiskPulse Overview...3 2 DiskPulse Product Versions...5 3 Using Desktop Product Version...6 3.1 Product
NDSR Utilities. Creating Backup Files. Chapter 9
Chapter 9 NDSR Utilities NDSR utilities include various backup and restore features, ways to generate output files, and methods of importing and exporting Header tab information. This chapter describes:
Practice Fusion API Client Installation Guide for Windows
Practice Fusion API Client Installation Guide for Windows Quickly and easily connect your Results Information System with Practice Fusion s Electronic Health Record (EHR) System Table of Contents Introduction
WA2262 Applied Data Science and Big Data Analytics Boot Camp for Business Analysts. Classroom Setup Guide. Web Age Solutions Inc.
WA2262 Applied Data Science and Big Data Analytics Boot Camp for Business Analysts Classroom Setup Guide Web Age Solutions Inc. Copyright Web Age Solutions Inc. 1 Table of Contents Part 1 - Minimum Software
Importing and Exporting With SPSS for Windows 17 TUT 117
Information Systems Services Importing and Exporting With TUT 117 Version 2.0 (Nov 2009) Contents 1. Introduction... 3 1.1 Aim of this Document... 3 2. Importing Data from Other Sources... 3 2.1 Reading
Database Servers Tutorial
Copyright 1995-2010 Esri All rights reserved. Table of Contents A quick tour of the database servers tutorial........................ 3 Exercise 1: Add a database server to the Catalog tree and create
MARCH 2005. Conversion Software User Guide for Windows. Version 2.0
MARCH 2005 CDS Conversion Software User Guide for Windows Version 2.0 Updated: 2/24/2006 Table of Contents CDS Conversion Software V2 for Windows User Guide... 1 System Requirements... 1 Introduction...
What is new in WiseImage
Additional RAM support for 64-bit OS Now WiseImage installed on Windows 64-bit is able to use up to 3.5 3.7 GB of RAM, whereas the previous versions of WiseImage could not use more than 1.5 GB of RAM.
Parameter Fields and Prompts. chapter
Parameter Fields and Prompts chapter 23 Parameter Fields and Prompts Parameter and prompt overview Parameter and prompt overview Parameters are Crystal Reports fields that you can use in a Crystal Reports
Installation of the KX-P8420 Print Driver And Support Files (Windows). Introduction:
Installation of the KX-P8420 Print Driver And Support Files (Windows). Introduction: When installing the printer driver and support files for the KX-P8420 there are many options to consider. Choosing the
Spatial Adjustment Tools: The Tutorial
Spatial Adjustment Tools: The Tutorial By Peter Kasianchuk, ESRI Educational Services In this exercise, you will perform some spatial adjustment and data management operations data to be used in analysis
64 Bits of MapInfo Pro!!! and the next BIG thing. March 2015
64 Bits of MapInfo Pro!!! and the next BIG thing March 2015 MapInfo Professional v12.5 Themes Cartographic output Performance improvements Ability to work directly with a map in a layout. An all new Layout
BSDI Advanced Fitness & Wellness Software
BSDI Advanced Fitness & Wellness Software 6 Kellie Ct. Califon, NJ 07830 http://www.bsdi.cc INSTRUCTION SHEET FOR MOVING YOUR DATABASE FROM ONE COMPUTER TO ANOTHER This document will outline the steps
Tech Sheet NOISEMOD.3PC HELP DOCUMENTATION
NOISEMOD.3PC HELP DOCUMENTATION What is NOISEMOD.3PC? is a Geopak application that generates a Mn/DOT specific ASCII file. This ASCII file is used to input data into Mn/DOT s Stamina noise model program.
Results CRM 2012 User Manual
Results CRM 2012 User Manual A Guide to Using Results CRM Standard, Results CRM Plus, & Results CRM Business Suite Table of Contents Installation Instructions... 1 Single User & Evaluation Installation
SPSS for Windows importing and exporting data
Guide 86 Version 3.0 SPSS for Windows importing and exporting data This document outlines the procedures to follow if you want to transfer data from a Windows application like Word 2002 (Office XP), Excel
Cookbook for Importing Point Information into a Polygon Shapefile using ArcGIS9
Cookbook for Importing Point Information into a Polygon Shapefile using ArcGIS9 I. Create a Master polygon shapefile. In addition to the FID field this shapefile must have a field containing a unique ID
System Administration and Log Management
CHAPTER 6 System Overview System Administration and Log Management Users must have sufficient access rights, or permission levels, to perform any operations on network elements (the devices, such as routers,
Creating Personal Web Sites Using SharePoint Designer 2007
Creating Personal Web Sites Using SharePoint Designer 2007 Faculty Workshop May 12 th & 13 th, 2009 Overview Create Pictures Home Page: INDEX.htm Other Pages Links from Home Page to Other Pages Prepare
Call Recorder Quick CD Access System
Call Recorder Quick CD Access System V4.0 VC2010 Contents 1 Call Recorder Quick CD Access System... 3 1.1 Install the software...4 1.2 Start...4 1.3 View recordings on CD...5 1.4 Create an archive on Hard
ImageServer Technical Note
ImageServer Technical Note Operating Environment: Windows 2000/2003 Server Software Version: 6.1 October 2005 Contents 1 Introducing ImageServer 5 1.1 Overview.......................................................
Government 1009: Advanced Geographical Information Systems Workshop. LAB EXERCISE 3b: Network
Government 1009: Advanced Geographical Information Systems Workshop LAB EXERCISE 3b: Network Objective: Using the Network Analyst in ArcGIS Implementing a network functionality as a model In this exercise,
Teradata SQL Assistant Version 13.0 (.Net) Enhancements and Differences. Mike Dempsey
Teradata SQL Assistant Version 13.0 (.Net) Enhancements and Differences by Mike Dempsey Overview SQL Assistant 13.0 is an entirely new application that has been re-designed from the ground up. It has been
FRONTPAGE FORMS... ... ...
tro FRONTPAGE FORMS........................................ CREATE A FORM.................................................................................. 1. Open your web and create a new page. 2. Click
4cast Client Specification and Installation
4cast Client Specification and Installation Version 2015.00 10 November 2014 Innovative Solutions for Education Management www.drakelane.co.uk System requirements The client requires Administrative rights
The manual can be used as a practical tutorial and aims to teach users how to:
Introduction This manual is aimed at users of the Rainforest Foundation UK's PostGIS database. It should be read by people wishing to upload and edit GPS survey data as well as by those who will administer
Software: AutoCAD Civil 3D 2014, NRCS C3D 2014 template, ESRI ArcMap. Notation:Button to Press Displayed Text Icon Action {Text to Enter} Menu Item
Overview: Use the following processes for exchanging georeferenced data between AutoCAD Civil 3D 2014 and ArcMap. The work must be based in any real world coordinate system. (This example uses NAD 83 UTM
Creating Figure Ground Maps in ArcMap 10.x: Basic procedures to download, open, manipulate and print spatial data
Creating Figure Ground Maps in ArcMap 10.x: Basic procedures to download, open, manipulate and print spatial data These procedures outline: A. Retrieving Property Data B. Uncompressing the Downloaded Files
How to Configure Windows 8.1 to run ereports on IE11
How to Configure Windows 8.1 to run ereports on IE11 Description: Windows 8.1 ships with IE10, but can be updated to IE11. There is a special mode in IE11 called Enterprise Mode that can be used to emulate
Excel Templates. & Quote/Invoice Maker for ACT! Another efficient and affordable ACT! Add-On by V 1.1. http://www.exponenciel.com
Excel Templates & Quote/Invoice Maker for ACT! V 1.1 Another efficient and affordable ACT! Add-On by http://www.exponenciel.com Excel Templates for ACT! User s Manual 2 Table of content Relationship between
Bulk Downloader. Call Recording: Bulk Downloader
Call Recording: Bulk Downloader Contents Introduction... 3 Getting Started... 3 Configuration... 4 Create New Job... 6 Running Jobs... 7 Job Log... 7 Scheduled Jobs... 8 Recent Runs... 9 Storage Device
UCINET Quick Start Guide
UCINET Quick Start Guide This guide provides a quick introduction to UCINET. It assumes that the software has been installed with the data in the folder C:\Program Files\Analytic Technologies\Ucinet 6\DataFiles
To change title of module, click on settings
HTML Module: The most widely used module on the websites. This module is very flexible and is used for inserting text, images, tables, hyperlinks, document downloads, and HTML code. Hover the cursor over
DWGSee Professional User Guide
DWGSee Professional User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee
Use this translator to save ArchiCAD layouts/views in DXF/DWG format if you plan to continue
Tip Sheet ArchiCAD 11 Mark Horrocks Graphisoft New Zealand May 2007 DWG Translator In Architectural practice you often send and receive content from co-working Structural, Mechanical or Electrical Engineers.
7. Data Packager: Sharing and Merging Data
7. Data Packager: Sharing and Merging Data Introduction The Epi Info Data Packager tool provides an easy way to share data with other users or to merge data collected by multiple users into a single database
PCRecruiter Resume Inhaler
PCRecruiter Resume Inhaler The PCRecruiter Resume Inhaler is a stand-alone application that can be pointed to a folder and/or to an email inbox containing resumes, and will automatically extract contact
ICP Data Entry Module Training document. HHC Data Entry Module Training Document
HHC Data Entry Module Training Document Contents 1. Introduction... 4 1.1 About this Guide... 4 1.2 Scope... 4 2. Step for testing HHC Data Entry Module.. Error! Bookmark not defined. STEP 1 : ICP HHC
How to Copy A SQL Database SQL Server Express (Making a History Company)
How to Copy A SQL Database SQL Server Express (Making a History Company) These instructions are written for use with SQL Server Express. Check with your Network Administrator if you are not sure if you
Sage Accpac ERP 5.6A. CRM Analytics for SageCRM I User Guide
Sage Accpac ERP 5.6A CRM Analytics for SageCRM I User Guide 2009 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and all SageCRM product and service names mentioned herein are registered
Lesson 07: MS ACCESS - Handout. Introduction to database (30 mins)
Lesson 07: MS ACCESS - Handout Handout Introduction to database (30 mins) Microsoft Access is a database application. A database is a collection of related information put together in database objects.
Using the Acrobat tab in Microsoft Word: Setting PDF Preferences
Using the Acrobat tab in Microsoft Word: Setting PDF Preferences IT Documentation Team, January 2015 (Reviewed July 2015) If you have Adobe Acrobat Pro XI installed on your PC 1, you ll see an additional
Document Management Quick Reference Guide
Documents Area The Citadon CW folders have the look and feel of Windows Explorer. The name of the selected folder appears above, and the folder's contents are displayed in the right frame. Corresponding
BSDI Advanced Fitness & Wellness Software
BSDI Advanced Fitness & Wellness Software 6 Kellie Ct. Califon, NJ 07830 http://www.bsdi.cc SOFTWARE BACKUP/RESTORE INSTRUCTION SHEET This document will outline the steps necessary to take configure the
How to Backup and FTP your SQL database using E2.
How to Backup and FTP your SQL database using E2. To follow these instructions steps 1 14 must be completed either on the SQL Server or on a workstation that has the SQL Client Tools installed. You may
Membership PLUS Backup/Restore
Membership PLUS Backup/Restore Backing up your files is the single most important thing you can do to protect them. The purpose of the backup process is to make it possible for you to restore information
v4.8 Getting Started Guide: Using SpatialWare with MapInfo Professional for Microsoft SQL Server
v4.8 Getting Started Guide: Using SpatialWare with MapInfo Professional for Microsoft SQL Server Information in this document is subject to change without notice and does not represent a commitment on
Data Tool Platform SQL Development Tools
Data Tool Platform SQL Development Tools ekapner Contents Setting SQL Development Preferences...5 Execution Plan View Options Preferences...5 General Preferences...5 Label Decorations Preferences...6
Eventia Log Parsing Editor 1.0 Administration Guide
Eventia Log Parsing Editor 1.0 Administration Guide Revised: November 28, 2007 In This Document Overview page 2 Installation and Supported Platforms page 4 Menus and Main Window page 5 Creating Parsing
MOVES Batch Mode: Setting up and running groups of related MOVES run specifications. EPA Office of Transportation and Air Quality 11/3/2010
MOVES Batch Mode: Setting up and running groups of related MOVES run specifications EPA Office of Transportation and Air Quality 11/3/2010 Webinar Logistics Please use question box to send any questions
Notepad++ The COMPSCI 101 Text Editor for Windows. What is a text editor? Install Python 3
Notepad++ The COMPSCI 101 Text Editor for Windows The text editor that we will be using in the Computer Science labs for creating our Python programs is called Notepad++ and http://notepad-plus-plus.org
WS_FTP Professional 12
WS_FTP Professional 12 Tools Guide Contents CHAPTER 1 Introduction Ways to Automate Regular File Transfers...5 Check Transfer Status and Logs...6 Building a List of Files for Transfer...6 Transfer Files
TIBCO Hawk SNMP Adapter Installation
TIBCO Hawk SNMP Adapter Installation Software Release 4.9.0 November 2012 Two-Second Advantage Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR
Envisioneer Technical Note
Title Blocks By default there are four pre-defined Worksheet view windows available (Floor Plan, Elevations, Details, and Site Plan). Each one contains a generic border and title block supplied by Cadsoft.
GETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6
1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)
TIBCO Spotfire Automation Services 6.5. User s Manual
TIBCO Spotfire Automation Services 6.5 User s Manual Revision date: 17 April 2014 Important Information SOME TIBCO SOFTWARE EMBEDS OR BUNDLES OTHER TIBCO SOFTWARE. USE OF SUCH EMBEDDED OR BUNDLED TIBCO
Printing Guide. MapInfo Pro Version 15.0. Contents:
MapInfo Pro Version 15.0 The purpose of this guide is to assist you in getting the best possible output from your MapInfo Pro software. We begin by covering the new print, import, and export features and
020112 2008 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or
Point of Sale Guide 020112 2008 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or mechanical, including photocopying,
XMap 7 Administration Guide. Last updated on 12/13/2009
XMap 7 Administration Guide Last updated on 12/13/2009 Contact DeLorme Professional Sales for support: 1-800-293-2389 Page 2 Table of Contents XMAP 7 ADMINISTRATION GUIDE... 1 INTRODUCTION... 5 DEPLOYING
Setting Up ALERE with Client/Server Data
Setting Up ALERE with Client/Server Data TIW Technology, Inc. November 2014 ALERE is a registered trademark of TIW Technology, Inc. The following are registered trademarks or trademarks: FoxPro, SQL Server,
7-1. This chapter explains how to set and use Event Log. 7.1. Overview... 7-2 7.2. Event Log Management... 7-2 7.3. Creating a New Event Log...
7-1 7. Event Log This chapter explains how to set and use Event Log. 7.1. Overview... 7-2 7.2. Event Log Management... 7-2 7.3. Creating a New Event Log... 7-6 7-2 7.1. Overview The following are the basic
Legal Notes. Regarding Trademarks. 2011 KYOCERA MITA Corporation
Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held liable for any problems arising from
Upgrading MySQL from 32-bit to 64-bit
Upgrading MySQL from 32-bit to 64-bit UPGRADING MYSQL FROM 32-BIT TO 64-BIT... 1 Overview... 1 Upgrading MySQL from 32-bit to 64-bit... 1 Document Revision History... 21 Overview This document will walk
E-mail Settings 1 September 2015
Training Notes 1 September 2015 PrintBoss can be configured to e-mail the documents it processes as PDF attachments. There are limitations to embedding documents in standard e-mails. PrintBoss solves these
MapInfo Professional Version 12.5. Printing Guide
MapInfo Professional Version 12.5 Printing Guide The purpose of this guide is to assist you in getting the best possible output from your MapInfo Professional software. We begin by covering the new print,
Groundwater Chemistry
Mapping and Modeling Groundwater Chemistry By importing Excel spreadsheets into ArcGIS 9.2 By Mike Price, Entrada/San Juan, Inc. In ArcGIS 9.2, Microsoft Excel spreadsheet data can be imported and used
Online Statements. About this guide. Important information
Online Statements About this guide This guide shows you how to: View online statements, including CommBiz Activity Statements (Billing summaries) and online statements for Transaction Accounts, Credit
There are numerous ways to access monitors:
Remote Monitors REMOTE MONITORS... 1 Overview... 1 Accessing Monitors... 1 Creating Monitors... 2 Monitor Wizard Options... 11 Editing the Monitor Configuration... 14 Status... 15 Location... 17 Alerting...
CGS 1550 File Transfer Project Revised 3/10/2005
CGS 1550 File Transfer Project Revised 3/10/2005 PURPOSE: The purpose of this project is to familiarize students with the three major styles of FTP client, which are: Pure (FTP only), character-based,
Geodatabase Tutorial. Copyright 1995-2010 Esri All rights reserved.
Copyright 1995-2010 Esri All rights reserved. Table of Contents A quick tour of the Building a geodatabase tutorial..................... 3 Exercise 1: Organizing your data in the Catalog......................
MICROSOFT OUTLOOK 2010 WORK WITH CONTACTS
MICROSOFT OUTLOOK 2010 WORK WITH CONTACTS Last Edited: 2012-07-09 1 Access to Outlook contacts area... 4 Manage Outlook contacts view... 5 Change the view of Contacts area... 5 Business Cards view... 6
Cataloging: Export or Import Bibliographic Records
OCLC Connexion Client Guides Cataloging: Export or Import Bibliographic Records Last updated: May 2014 6565 Kilgour Place, Dublin, OH 43017-3395 www.oclc.org Revision History Date Section title Description
3. Field to GIS. 2. Field Update
GPS Data Update 1. Introduction to data maintenance a. What is it? b. Why is it needed? 2. Uses for data update a. Update attribute data b. Update location coordinates Outline Data maintenance is an ongoing
Introduction to GIS Mapping and ESRI s ArcGIS Software
01-Introduction To GIS Mapping And Arcgis 9.2 Software.Doc Page 1 of 25 Objectives Introduction to GIS Mapping and ESRI s ArcGIS Software In this exercise you are introduced to the ArcMap interface and
You must have at least Editor access to your own mail database to run archiving.
Archiving An archive is a copy of a database you can create to store information no longer in use. Like a replica, an archive contains all documents and design elements in the original database, but unlike
Decreases the magnification of your chart. Changes the magnification of the displayed chart.
OrgPlus Guide 1) Logging In 2) Icon Key 3) Views a. Org Chart b. Salary Org Chart c. Head Count/Span of Control 4) Viewing Profile/Explore/Bookmarks Panels a. Creating Bookmarks 5) Searching a. From the
TAMS 2.1 User s Manual. Utah LTAP Center. Contact: Utah LTAP 4111 Old Main Hill Logan, UT. 84322-4111 800-822-8878 www.utahltap.
TAMS 2.1 User s Manual Utah LTAP Center Contact: Utah LTAP 4111 Old Main Hill Logan, UT. 84322-4111 800-822-8878 www.utahltap.org Table of Contents Introduction 1 Initializing the program... 1 Data Needed
How to Download Census Data from American Factfinder and Display it in ArcMap
How to Download Census Data from American Factfinder and Display it in ArcMap Factfinder provides census and ACS (American Community Survey) data that can be downloaded in a tabular format and joined with
ELEPHANT. Serviced Offices. The 116 Group Limited Telephone: 0203 3713333
ELEPHANT In Serviced Offices The 116 Group Limited Telephone: 0203 3713333 Web: www.wcgl.co.uk Revision 1.9.0 ELEPHANT IN SERVICED OFFICES TABLE OF CONTENTS Elephant in Serviced Offices... 3 Table of contents...
Linking FLIPS to a GIS Shapefile
Linking FLIPS to a GIS Shapefile User s Guide Atterbury Consultants, Inc. 3800 SW Cedar Hills Blvd. Suite 145 Beaverton, Oregon 97005 503-646-5393 Phone 503-644-1683 Fax www.atterbury.com Table of Contents
13/10/2011. Data Integration and Interoperability. Gordon Sumerling & Maree Wilson
Data Integration and Interoperability Gordon Sumerling & Maree Wilson 1 Agenda Seamless integration between GIS and CAD CAD Support in ArcGIS Using GIS Data in CAD Editing GIS Data in CAD Introduction
SafeGuard PrivateCrypto 2.40 help
SafeGuard PrivateCrypto 2.40 help Document date: September 2009 Contents 1 Introduction... 2 2 Installation... 4 3 SafeGuard PrivateCrypto User Application... 5 4 SafeGuard PrivateCrypto Explorer extensions...
Tutorial 4 - Attribute data in ArcGIS
Tutorial 4 - Attribute data in ArcGIS Note: Before beginning the tutorial, please make sure your server folder is mapped. The data you will be working with this week is contained in a winzip archive called
COMOS. Platform COMOS Platform Interfaces. Importing and exporting data 1. XML connectors 2. Standard import "Blank XML" 3
COMOS Platform Operating Manual Importing and exporting data 1 XML connectors 2 Standard import "Blank XML" 3 Standard import "Blank table" 4 Engineering projects 5 Data exchange with NOXIE 6 COMOS document
University of Arkansas Libraries ArcGIS Desktop Tutorial. Section 4: Preparing Data for Analysis
: Preparing Data for Analysis When a user acquires a particular data set of interest, it is rarely in the exact form that is needed during analysis. This tutorial describes how to change the data to make
IMPORT GUIDE Checklist for Importing ASCII Client Data into CSA Using Microsoft Excel
IMPORT GUIDE Checklist for Importing ASCII Client Data into CSA Using Microsoft Introduction... 1 Filenaming guidelines... 1 File format requirements... 2 Formatting the ASCII data files using Microsoft...
Forms Printer User Guide
Forms Printer User Guide Version 10.51 for Dynamics GP 10 Forms Printer Build Version: 10.51.102 System Requirements Microsoft Dynamics GP 10 SP2 or greater Microsoft SQL Server 2005 or Higher Reporting
OPERATION MANUAL. MV-410RGB Layout Editor. Version 2.1- higher
OPERATION MANUAL MV-410RGB Layout Editor Version 2.1- higher Table of Contents 1. Setup... 1 1-1. Overview... 1 1-2. System Requirements... 1 1-3. Operation Flow... 1 1-4. Installing MV-410RGB Layout
SCATS. EDI File Verification. User Manual
SCATS EDI File Verification User Manual Helpdesk Phone Number: 601-359-3205 Table of Contents Table of Contents 1 Buttons 2 Menus.. 2 File Menu Items..... 3 Clear 3 Exit.. 3 Help Menu Items.. 3 User Manual.