Envisioneer Technical Note

Size: px
Start display at page:

Download "Envisioneer Technical Note"

Transcription

1 Title Blocks By default there are four pre-defined Worksheet view windows available (Floor Plan, Elevations, Details, and Site Plan). Each one contains a generic border and title block supplied by Cadsoft. You can edit the title block to suit your needs, or delete it and insert a different title block, including any custom ones that you have created. Below is a list of standard sheet sizes. Sheet System Sheet Size Metric Dimensions (mm) ANSI A 216 X X 11 ANSI B 279 X X 17 Arch C 457 X X 24 Arch D 610 X X 36 Arch E 914 X X 48 Arch F 762 X X 42 Inserting a New Title Block Imperial Dimensions (inches) If you delete the generic title block in one of the default Worksheet view windows, or create a new Worksheet view window, you can use the Import CAD File tool to insert a title block of your choice onto the worksheet. Envisioneer ships with many title block options in DWG format. You can also insert any custom title blocks that you have created if they are in DWG or DXF format. To delete the existing title block: 1. Click on any object on the existing title block. Because it is a block, the entire title block is selected. 2. Press the Delete key on your keyboard. To insert a title block: 1. Select Insert > Import CAD File (or File > Import > Import CAD File). 2. In the Open dialog, locate and select the file that you want to import. To view the title blocks that ship with Envisioneer, double-click the Title Blocks folder to expand it. 3. Select a title block, then click Open. A preview of the title block is displayed in the Import dialog. 4. In the Import dialog, specify an insertion scale for the title block if necessary. By default, the block will be scaled by the same factor in both the X and Y direction. If you wanted to scale it differently in each direction, you would have to first unlock the lock beside the Scale edit boxes. Note: If you are importing a file that was created in AutoCAD, specify a scale of 25.4 (1 inch = 25.4 mm). AutoCAD has a non-scaled drawing environment. Therefore, AutoCAD files must be scaled to suit Envisioneer s scaled drawing environment. If you were to export to a DWG file from Envisioneer, and then were to import that DWG file back into Envisioneer, your scale factor would be 1. Similarly, the scale factor for the title blocks that ship with Envisioneer would also be 1.

2 5. If you want to import only a portion of the image, click next to the Crop Box option and then create a box around the desired portion by picking two diagonal points. 6. Click. 7. If the title block contains attributes, the Edit Block Attributes dialog box appears. Attributes are strings of text that can be customized every time the block is inserted. For example, you can specify a custom project name, drawing number or company name for the title block. To edit an attribute value, simply click on the attribute, type the desired value, then press Enter. If you prefer you can accept the default values for now and edit them after the title block has been inserted. 8. Once you have defined attribute values, click OK. The title block is attached to your crosshairs. 9. Position the title block in the drawing area, then click to insert it.

3 Customizing Title Blocks By default, the existing Worksheet View windows contain a generic 24 x 36 title block. (This is the D1-sizelandscape.dwg file in the program s Title Blocks folder.) All title blocks supplied by Cadsoft contain attributes, which are strings of text that you can customize. You can also customize the structure of a title block by editing its definition. To customize text on a title block: 1. With the title block displayed on your worksheet, select View > Zoom Window. 2. Zoom in on the lower right corner of the title block. Notice the different types of information that appear in this portion of the block. 3. Click anywhere on the title block to select it. 4. In the Object Properties panel, click on the Edit button in the Attributes field.

4 5. In the Edit Block Attributes dialog, click on the value of the attribute that you want to change, then type the desired value and press Enter. For example, to change the date, click on Jan next to the Date item, then type today s date and press Enter. 6. Click OK. The date on the title block is updated. Tip: If a block contains attributes, the Edit Block Attributes dialog will appear automatically every time someone inserts the block in a drawing. This prompts the user to fill in and verify all pertinent title block fields. To edit the structure of a title block: 1. In the Object Properties panel, click on the Edit button in the Definition field.

5 When you edit a block s definition, everything except the title block is dimmed, indicating that you are currently in block editing mode. In this mode, every line and object in the title block can be selected and edited individually. 2. Click on the object on the title block that you would like to edit. For example, if we wanted to delete the line above the DESIGNER text, we would click on that line. Notice that only the object that you click on is selected. 3. To delete a selected object, select Modify > Delete. Tip: You can use any tool on the Modify menu to edit objects in your title block, including Move, Rotate and Duplicate. You can also add objects to the block. 4. Press the ESC key on your keyboard to exit the block editing mode and return to your overall worksheet. Creating Your Own Title Blocks You can design your own drawing borders and title blocks in Envisioneer and save them in DWG format for use in any project. To create your own title block: 1. Open a blank Worksheet view window and use drawing tools such as Line, Polyline and Rectangle to create the structure of the title block. 2. Use the Text tool to add static text to the title block. You can also add textual attributes to the title block by selecting Insert > Blocks > Insert Attribute. An attribute is text that can be customized by a user every time the block is inserted. 3. If you want to add an image to the title block, such as your company logo, select Insert > Import Image, then select and insert the desired image. 4. When your title block design is finished, select File > Export > 2D Drawing. Save the drawing as a DWG file in your Title Blocks folder. By default, the Title Blocks folder is located here: C:\ProgramData\Cadsoft\Envisioneer\Drafting Objects\Title Blocks 5. To insert the title block, use the Import CAD File tool. If the title block contains attributes, you will be prompted to specify values for the attributes every time that the block is inserted.

Chapter 23: Drafting in Worksheet View

Chapter 23: Drafting in Worksheet View Chapter 23: Drafting in Worksheet View Worksheet View is a powerful, 2D production drafting module. Here you can find all of the drawing and editing tools needed to create fast, accurate, detailed working

More information

Layout Tutorial. Getting Started

Layout Tutorial. Getting Started Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating

More information

Importing Contacts to Outlook

Importing Contacts to Outlook Importing Contacts to Outlook 1. The first step is to create a file of your contacts from the National Chapter Database. 2. You create this file under Reporting, Multiple. You will follow steps 1 and 2

More information

Building Visualization using Autodesk VIZ

Building Visualization using Autodesk VIZ Building Visualization using Autodesk VIZ The biggest mistake is thinking that one must make a complete 3D model. One approach to visualization is to take a cue from Hollywood building only what is required

More information

CREATING AN IMAGE FROM AUTOCAD CADD NOTE 16. MENU: AutoCAD, File, Plot COMMAND: plot ICON:

CREATING AN IMAGE FROM AUTOCAD CADD NOTE 16. MENU: AutoCAD, File, Plot COMMAND: plot ICON: CADD NOTE 16 This CADD Note provides instructions on creating an image from an AutoCAD drawing that can be pasted into another application (e.g., Word, Powerpoint, etc.). These instructions assume the

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy

More information

The all-new graphic user interface of PDF Converter Elite consists of six main components:

The all-new graphic user interface of PDF Converter Elite consists of six main components: Interface Interface Elements The all-new graphic user interface of PDF Converter Elite consists of six main components: 1. The Menu bar contains six drop down menus: File, Edit, Convert, Document, View

More information

Avaya Flare Experience for Windows Quick Reference

Avaya Flare Experience for Windows Quick Reference Avaya Flare Experience for Windows Quick Reference Making voice calls Making a voice call using the dialpad 1. Click the Call button under the center spotlight or press the CONTROL + D keys on your keyboard

More information

Overview... 2 How to Add New Documents... 3 Adding a Note / SMS or Phone Message... 3 Adding a New Letter... 4. How to Create Letter Templates...

Overview... 2 How to Add New Documents... 3 Adding a Note / SMS or Phone Message... 3 Adding a New Letter... 4. How to Create Letter Templates... THE DOCUMENT MANAGER Chapter 14 THE DOCUMENT MANAGER CONTENTS Overview... 2 How to Add New Documents... 3 Adding a Note / SMS or Phone Message... 3 Adding a New Letter... 4 How to Create Letter Templates...

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy

More information

JumpStart Guide. Trimble QuickPen PipeDesigner 3D Software

JumpStart Guide. Trimble QuickPen PipeDesigner 3D Software L JumpStart Guide Trimble QuickPen PipeDesigner 3D Software Revision A February 2013 F Englewood Office Trimble Navigation Limited 384 Inverness Parkway, Suite 200 Englewood, Colorado 80112 (800) 234-3758

More information

Getting Started With DraftSight A Guide For AEC Users

Getting Started With DraftSight A Guide For AEC Users Getting Started With DraftSight A Guide For AEC Users DraftSight.com Facebook.com/DraftSight Welcome to DraftSight a valuable tool for any AEC professional! DraftSight is more than a free, professional-grade

More information

Adobe Acrobat 9 Pro Accessibility Guide: Creating Accessible Forms

Adobe Acrobat 9 Pro Accessibility Guide: Creating Accessible Forms Adobe Acrobat 9 Pro Accessibility Guide: Creating Accessible Forms Adobe, the Adobe logo, Acrobat, Acrobat Connect, the Adobe PDF logo, Creative Suite, LiveCycle, and Reader are either registered trademarks

More information

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important

More information

GETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6

GETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6 1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)

More information

Software for Producing Rack Layouts and Purchase Orders

Software for Producing Rack Layouts and Purchase Orders 1 Software for Producing Rack Layouts and Purchase Orders Welcome to RackTools: software that makes it simple and quick to specify Middle Atlantic Products. RackTools has been designed with one purpose

More information

Lesson Four 3D Modeling

Lesson Four 3D Modeling Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically

More information

HP LaserJet P2050 Series Printer Print tasks

HP LaserJet P2050 Series Printer Print tasks Cancel a print job Stop the current print job from the control panel Press the Cancel button on the control panel. OK Stop the current print job from the software program When you send the print job, a

More information

Layout Tutorial. Chapter 10: Getting Started

Layout Tutorial. Chapter 10: Getting Started Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating

More information

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems

More information

User Guide. DYMO Label TM v.8

User Guide. DYMO Label TM v.8 User Guide DYMO Label TM v.8 Copyright 2009 Sanford, L.P. All rights reserved. Revised 6/12/09. No part of this document or the software may be reproduced or transmitted in any form or by any means or

More information

Content Author's Reference and Cookbook

Content Author's Reference and Cookbook Sitecore CMS 6.2 Content Author's Reference and Cookbook Rev. 091019 Sitecore CMS 6.2 Content Author's Reference and Cookbook A Conceptual Overview and Practical Guide to Using Sitecore Table of Contents

More information

DWG to PDF Converter User Guide

DWG to PDF Converter User Guide DWG to PDF Converter User Guide This simple converter helps you batch convert DWG, DXF and DWF to PDF without AutoCAD. Quick start for converting drawings to PDF format There are 5 steps to get drawings

More information

Word Lesson 1 Microsoft Word Basics. Microsoft Office 2010 Introductory

Word Lesson 1 Microsoft Word Basics. Microsoft Office 2010 Introductory Microsoft Word Basics Microsoft Office 2010 Introductory 1 Objectives Start Word and understand the ways to view your document. Enter text in a document and navigate a document. Use Backspace and Delete

More information

Microsoft Word Setting Headers and Footers in Word 2011 Mac

Microsoft Word Setting Headers and Footers in Word 2011 Mac Microsoft Word 2011 - Setting Headers and Footers in Word 2011 Mac Customize the document headers and footers in Word 2011 for Mac to show page numbers, dates, and logos for formal stationery. You can

More information

dobe Acrobat XI Pro Digital Signatures

dobe Acrobat XI Pro Digital Signatures dobe Acrobat XI Pro Digital Signatures Intermediate Adobe Acrobat XI Pro is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this

More information

Using an Automatic Back Up for Outlook 2003 and Outlook 2007 Personal Folders

Using an Automatic Back Up for Outlook 2003 and Outlook 2007 Personal Folders Using an Automatic Back Up for Outlook 2003 and Outlook 2007 Personal Folders Part 1 Install the Personal Folder Backup Utility Note: You should close Outlook and any other applications before installing

More information

Using Excel to find Perimeter, Area & Volume

Using Excel to find Perimeter, Area & Volume Using Excel to find Perimeter, Area & Volume Level: LBS 4 V = lwh Goal: To become familiar with Microsoft Excel by entering formulas into a spreadsheet in order to calculate the perimeter, area and volume

More information

IES Tutorial. ModelIT (Version 6.0)

IES <Virtual Environment> Tutorial. ModelIT (Version 6.0) IES Tutorial ModelIT (Version 6.0) 1 Introduction: ModelIT Tutorial This document shows you how to use ModelIT, IES s 3D building geometry modelling tool. The tutorial is intended

More information

To successfully initialize Microsoft Outlook (Outlook) the first time, email settings need to be verified.

To successfully initialize Microsoft Outlook (Outlook) the first time, email settings need to be verified. TO: UAN CLIENTS FROM: UAN STAFF DATE: OCTOBER 8, 2008 SUBJECT: Steps for Initial Setup of Microsoft Outlook To successfully initialize Microsoft Outlook (Outlook) the first time, email settings need to

More information

CREATING BANNERS & IMAGES USING MS PAINT & ANIMATED PROGRAMS

CREATING BANNERS & IMAGES USING MS PAINT & ANIMATED PROGRAMS Support for Website & Online Store owners CREATING BANNERS & IMAGES USING MS PAINT & ANIMATED PROGRAMS If you want a fantastic high quality banner/logo/image design it is recommended that you get help

More information

How to create pop-up menus

How to create pop-up menus How to create pop-up menus Pop-up menus are menus that are displayed in a browser when a site visitor moves the pointer over or clicks a trigger image. Items in a pop-up menu can have URL links attached

More information

Working With Animation: Introduction to Flash

Working With Animation: Introduction to Flash Working With Animation: Introduction to Flash With Adobe Flash, you can create artwork and animations that add motion and visual interest to your Web pages. Flash movies can be interactive users can click

More information

AutoDWG DWGSee DWG Viewer. DWGSee User Guide

AutoDWG DWGSee DWG Viewer. DWGSee User Guide DWGSee User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee After you install

More information

Web Intelligence User Guide

Web Intelligence User Guide Web Intelligence User Guide Office of Financial Management - Enterprise Reporting Services 4/11/2011 Table of Contents Chapter 1 - Overview... 1 Purpose... 1 Chapter 2 Logon Procedure... 3 Web Intelligence

More information

The first thing to do is choose if you are creating a mail merge for printing or an e-mail merge for distribution over e-mail.

The first thing to do is choose if you are creating a mail merge for printing or an e-mail merge for distribution over e-mail. Create a mail or e-mail merge Use mail or e-mail merge when you want to create a large number of documents that are mostly identical but include some unique information. For example, you can use mail merge

More information

CDOT Monumentation Sheets

CDOT Monumentation Sheets CDOT Monumentation Sheets This document describes the process used to assemble a Right of Way Monumentation Sheet. An InRoads XML report is used to display the required data from the geometry project.

More information

10. THERM DRAWING TIPS

10. THERM DRAWING TIPS 10. THERM DRAWING TIPS 10.1. Drawing Tips The THERM User's Manual describes in detail how to draw cross-sections in THERM. This section of the NFRC Simualation Training Manual presents some additional

More information

SMART Notebook 10 User s Guide. Linux Operating Systems

SMART Notebook 10 User s Guide. Linux Operating Systems SMART Notebook 10 User s Guide Linux Operating Systems Product Registration If you register your SMART product, we ll notify you of new features and software upgrades. Register online at www.smarttech.com/registration.

More information

MAS 90 Demo Guide: Accounts Payable

MAS 90 Demo Guide: Accounts Payable MAS 90 Demo Guide: Accounts Payable Vendors, invoice tracking, and check creation is a necessity of business. In this guide we will look at how vendors are set up, invoices are recorded, and checks are

More information

Impress Guide. Chapter 2 Using Slide Masters, Styles, and Templates

Impress Guide. Chapter 2 Using Slide Masters, Styles, and Templates Impress Guide Chapter 2 Using Slide Masters, Styles, and Templates Copyright This document is Copyright 2005 2009 by its contributors as listed in the section titled Authors. You may distribute it and/or

More information

FDOT Plans Production Tools

FDOT Plans Production Tools FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: Mike.Racca@dot.state.fl.us Phone: 850-245-1631 GENERAL Civil 3D Plan Production

More information

Las Vegas, Nevada, December 3 6, Speaker Name: Colleen Klein. Course Title: Going Back and Forth from Inventor to AutoCAD

Las Vegas, Nevada, December 3 6, Speaker Name: Colleen Klein. Course Title: Going Back and Forth from Inventor to AutoCAD Las Vegas, Nevada, December 3 6, 2002 Speaker Name: Colleen Klein Course Title: Going Back and Forth from Inventor to AutoCAD Course ID: MA21-2 Wed, 12/4 11:00 am to 12:30 pm Course Outline: Moving mechanical

More information

Applying a circular load. Immediate and consolidation settlement. Deformed contours. Query points and query lines. Graph query.

Applying a circular load. Immediate and consolidation settlement. Deformed contours. Query points and query lines. Graph query. Quick Start Tutorial 1-1 Quick Start Tutorial This quick start tutorial will cover some of the basic features of Settle3D. A circular load is applied to a single soil layer and settlements are examined.

More information

Microsoft Outlook Tips & Tricks

Microsoft Outlook Tips & Tricks Microsoft Outlook Tips & Tricks Columbia College Technology Services Table of Contents Creating an email signature Page 1 Handling attachments Page 1 Sending an attachment Opening an attachment Page 2

More information

Part II Acrobat 8 Professional

Part II Acrobat 8 Professional Part II Acrobat 8 Professional Exporting Images There will be times when images will need to be exported out of a PDF document and saved as a file type in which it can be used in a different application.

More information

Layout Tutorial. Chapter 10: Getting Started

Layout Tutorial. Chapter 10: Getting Started Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating

More information

Sage 500 ERP Intelligence Reporting Getting Started Guide 27.11.2012

Sage 500 ERP Intelligence Reporting Getting Started Guide 27.11.2012 Sage 500 ERP Intelligence Reporting Getting Started Guide 27.11.2012 Table of Contents 1.0 Getting started 3 2.0 Managing your reports 10 3.0 Defining report properties 18 4.0 Creating a simple PivotTable

More information

MS PowerPoint an overview

MS PowerPoint an overview MS PowerPoint 2010 - an overview Microsoft PowerPoint is a presentation program, i.e. a software package used to display information as a slide show. This short course is an introduction to Microsoft PowerPoint

More information

5.6.3 Lab: Registry Backup and Recovery in Windows XP

5.6.3 Lab: Registry Backup and Recovery in Windows XP 5.6.3 Lab: Registry Backup and Recovery in Windows XP Introduction Print and complete this lab. In this lab, you will back up a computer registry. You will also perform a recovery of a computer registry.

More information

Outlook Email Management

Outlook Email Management ITS Computing Guide IT Services www.its.salford.ac.uk Outlook Email Management Use of the University s electronic storage areas is increasing at a greater rate than ever before. In order to keep systems

More information

Profit Developers, Inc. (PDI) 2015 SAXTAX Software Installation Guide

Profit Developers, Inc. (PDI) 2015 SAXTAX Software Installation Guide 2015 SAXTAX Software Installation Guide 1. Installation: Installing from a Link: Please click on the link provided in the setup email received. Some email accounts will not allow access to executable links

More information

Chapter 30: How to import a DWG drawing not created with MasterChef

Chapter 30: How to import a DWG drawing not created with MasterChef Chapter 30: How to import a DWG drawing not created with MasterChef Launch MasterChef from the icon on your desktop. Note: If you are using a demo version, once loaded the program, a message will notify

More information

Microsoft Publisher 2013

Microsoft Publisher 2013 CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Microsoft Publisher 2013 Spring 2015, Version 1.0 Table of Contents Introduction...3 Starting Publisher...3 Overview of the User

More information

Quick Start Guide for SAXTAX 2010 Programs

Quick Start Guide for SAXTAX 2010 Programs Quick Start Guide for SAXTAX 2010 Programs 1. Installation: Installing from a Link: Please click on the link provided in the setup email received. You will automatically be prompted with a download window.

More information

Help. Contents Back >>

Help. Contents Back >> Contents Back >> Customizing Opening the Control Panel Control Panel Features Tabs Control Panel Lists Control Panel Buttons Customizing Your Tools Pen and Airbrush Tabs 2D Mouse and 4D Mouse Tabs Customizing

More information

Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA

Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA MAE 244 : Dynamics and Strength Laboratory Fall 2005 Tutorial Material for Pro/ENGINEER Wildfire 2.0 With Integrated Pro/MECHANICA Tutorial 2: Modeling Cantilever Beam and Performing Finite Element Analysis

More information

The following is an overview of lessons included in the tutorial.

The following is an overview of lessons included in the tutorial. Chapter 2 Tutorial Tutorial Introduction This tutorial is designed to introduce you to some of Surfer's basic features. After you have completed the tutorial, you should be able to begin creating your

More information

TM Online Storage: StorageSync

TM Online Storage: StorageSync TM Online Storage: StorageSync 1 Part A: Backup Your Profile 1: How to download and install StorageSync? Where to download StorageSync? You may download StorageSync from your e-storage account. Please

More information

Quick Start Tutorial Metric version

Quick Start Tutorial Metric version Quick Start Tutorial Metric version 1996-2009 Cadsoft Corporation. No part of this guide or the accompanying software may be reproduced or transmitted, electronically or mechanically, without written permission

More information

There are two distinct working environments, or spaces, in which you can create objects in a drawing.

There are two distinct working environments, or spaces, in which you can create objects in a drawing. That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial

More information

Creating Drawings in Pro/ENGINEER

Creating Drawings in Pro/ENGINEER 6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing

More information

Microsoft PowerPoint 2013 Part 2: Notes, Links, & Graphics. Choosing a Design. Adding Content Exercise. Inserting Screen Shots.

Microsoft PowerPoint 2013 Part 2: Notes, Links, & Graphics. Choosing a Design. Adding Content Exercise. Inserting Screen Shots. Microsoft PowerPoint 2013 Part 2: Notes, Links, & Graphics Choosing a Design Open PowerPoint. Click on Blank Presentation. Click on the Design tab. Click on the design tab of your choice. Adding Content

More information

WIX: Building a Website with a Template. Choosing a Template First you will need to choose a template from the Create section of the Wix website.

WIX: Building a Website with a Template. Choosing a Template First you will need to choose a template from the Create section of the Wix website. WIX: Building a Website with a Template Choosing a Template First you will need to choose a template from the Create section of the Wix website. To choose a template: 1. Go to wix.com. 2. From the top

More information

Contents Overview Creating and using templates Organizing templates

Contents Overview Creating and using templates Organizing templates How to Work with Templates How to Work with Templates Version 0.2 First edition: January 2004 First English edition: January 2004 Contents Contents Overview... ii About this guide... ii Conventions used

More information

Decision Support AITS University Administration. Web Intelligence Rich Client 4.1 User Guide

Decision Support AITS University Administration. Web Intelligence Rich Client 4.1 User Guide Decision Support AITS University Administration Web Intelligence Rich Client 4.1 User Guide 2 P age Web Intelligence 4.1 User Guide Web Intelligence 4.1 User Guide Contents Getting Started in Web Intelligence

More information

Microsoft PowerPoint 2008

Microsoft PowerPoint 2008 Microsoft PowerPoint 2008 Starting PowerPoint... 2 Creating Slides in Your Presentation... 3 Beginning with the Title Slide... 3 Inserting a New Slide... 3 Slide Layouts... 3 Adding an Image to a Slide...

More information

Lesson 7 - Creating Animation II

Lesson 7 - Creating Animation II Lesson 7 - Creating Animation II A. Motion-Tweened Animation With motion tweening, you can easily create motion effects for the objects in your Flash movies. Kites flying, balls bouncing, rocks rolling

More information

ActiView. Visual Presenter Image Software User Manual - English

ActiView. Visual Presenter Image Software User Manual - English ActiView Visual Presenter Image Software User Manual - English Date: 05/02/2013 Table of Contents 1. Introduction... 3 2. System Requirements... 3 3. Install ActiView - Windows OS... 4 4. Install ActiView

More information

Importing and exporting content

Importing and exporting content Importing and exporting content Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. In this tutorial, you will import an AutoCAD DWG file into Corel

More information

RV 12 Electrical Schematic Instructions

RV 12 Electrical Schematic Instructions RV 12 Electrical Schematic Instructions Step 1: Set your monitor resolution as high as possible. Step 2: Download "RV 12 Electrical Systems (XXX).dwg" from the Van's Aircraft web site to your desktop.

More information

Content Author's Reference and Cookbook

Content Author's Reference and Cookbook Sitecore CMS 6.5 Content Author's Reference and Cookbook Rev. 110621 Sitecore CMS 6.5 Content Author's Reference and Cookbook A Conceptual Overview and Practical Guide to Using Sitecore Table of Contents

More information

For additional how to tips go to: http://support.perfectweddingguide.com

For additional how to tips go to: http://support.perfectweddingguide.com How to use your PWG leads and PWGMailer programs For additional how to tips go to: http://support.perfectweddingguide.com Generating Leads on PWG.com 1. First you will need to log onto your vendor account

More information

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting

More information

Tools Editor. FIG: 14.1 Select edit logging Tool Details

Tools Editor. FIG: 14.1 Select edit logging Tool Details Tools Editor When tools are ran in a service (by editing the tool string for a particular service), they are chosen by type and serial number. Each serial number is assigned to a specific tool model. Each

More information

Excel basics. Before you begin. What you'll learn. Requirements. Estimated time to complete:

Excel basics. Before you begin. What you'll learn. Requirements. Estimated time to complete: Excel basics Excel is a powerful spreadsheet and data analysis application, but to use it most effectively, you first have to understand the basics. This tutorial introduces some of the tasks and features

More information

Creating PDF Forms in Adobe Acrobat

Creating PDF Forms in Adobe Acrobat Creating PDF Forms in Adobe Acrobat Flinders University Centre for Educational ICT Contents What are PDF forms?... 1 Viewing a PDF form... 1 Types of PDF forms... 1 Printing and saving PDF forms... 1 Forms

More information

Handout: How to Use Excel 2010

Handout: How to Use Excel 2010 How to Use Excel 2010 Table of Contents THE EXCEL ENVIRONMENT... 4 MOVE OR SCROLL THROUGH A WORKSHEET... 5 USE THE SCROLL BARS TO MOVE THROUGH A WORKSHEET... 5 USE THE ARROW KEYS TO MOVE THROUGH A WORKSHEET...

More information

Hands On Exercise Using the SHA Detail Model (Bridge)

Hands On Exercise Using the SHA Detail Model (Bridge) Let s look at an example: Hands On Exercise Using the SHA Detail Model (Bridge) In this exercise, the standard shadetail2d.dgn has been used to create a new file (pbr- BD01_chapter2.dgn). Additional elements

More information

PowerPoint 2013. 3. Save: Click SAVE icon. Name your file, click SAVE

PowerPoint 2013. 3. Save: Click SAVE icon. Name your file, click SAVE PowerPoint 2013 1 1. Open PowerPoint: Select Blank Presentation 2. Click NEW SLIDE down-arrow in the HOME menu: Type the title of your presentation on Slide #1 Click NEW SLIDE Type the title of Slide #2

More information

Use this translator to save ArchiCAD layouts/views in DXF/DWG format if you plan to continue

Use this translator to save ArchiCAD layouts/views in DXF/DWG format if you plan to continue Tip Sheet ArchiCAD 11 Mark Horrocks Graphisoft New Zealand May 2007 DWG Translator In Architectural practice you often send and receive content from co-working Structural, Mechanical or Electrical Engineers.

More information

3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple

3D Modeling in Vectorworks 2009 by Jonathan Pickup. mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup mple 3D Modeling in Vectorworks 2009 by Jonathan Pickup 3D Modeling Vectorworks 2009 Published by Nemetschek North America 2008 Jonathan Pickup Vectorworks

More information

Advanced Excel 10/20/2011 1

Advanced Excel 10/20/2011 1 Advanced Excel Data Validation Excel has a feature called Data Validation, which will allow you to control what kind of information is typed into cells. 1. Select the cell(s) you wish to control. 2. Click

More information

EXERCISE 7 EXERCISE 7: FARNSWORTH HOUSE

EXERCISE 7 EXERCISE 7: FARNSWORTH HOUSE FARNSWORTH HOUSE: EXERCISE 7 Farnswoth House, 1945-51, Mies van der Rohe EXERCISE 7: FARNSWORTH HOUSE ASSIGNMENT: In this exercise you will create an architectural model of the Farnsworth House by Mies

More information

University of Minnesota Financial Document Scanning Guide for ImageNow 6.2

University of Minnesota Financial Document Scanning Guide for ImageNow 6.2 University of Minnesota Financial Document Scanning Guide for ImageNow 6.2 INTRODUCTION... 2 LAUNCHING IMAGENOW AND LOGGING IN... 2 IMAGENOW TOOLBAR... 3 SCANNING DOCUMENTS INTO IMAGENOW... 3 PREPARATION...

More information

SketchUp Instructions

SketchUp Instructions SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially

More information

Crystal Reports Payroll Exercise

Crystal Reports Payroll Exercise Crystal Reports Payroll Exercise Objective This document provides step-by-step instructions on how to build a basic report on Crystal Reports XI on the MUNIS System supported by MAISD. The exercise will

More information

Using FileMaker Pro with Microsoft Office

Using FileMaker Pro with Microsoft Office Hands-on Guide Using FileMaker Pro with Microsoft Office Making FileMaker Pro Your Office Companion page 1 Table of Contents Introduction... 3 Before You Get Started... 4 Sharing Data between FileMaker

More information

SMART Board Training Outline Trainer: Basel Badran

SMART Board Training Outline Trainer: Basel Badran Sharjah Higher Colleges of Technology SMART Board Training Outline Trainer: Basel Badran What is a SMART Board? o Concept & Technology SMART Board Components: o Smart Tools Start Center Recorder Keyboard

More information

U of S Course Tools. Copying a Development/Test Course into a Live Course in the U of S Course Tools For Instructors

U of S Course Tools. Copying a Development/Test Course into a Live Course in the U of S Course Tools For Instructors U of S Course Tools Copying a Development/Test Course into a Live Course in the U of S Course Tools For Instructors June 2014 U of S Course Tools Background STEP All courses at the U of S are available

More information

Advanced Presentation Features and Animation

Advanced Presentation Features and Animation There are three features that you should remember as you work within PowerPoint 2007: the Microsoft Office Button, the Quick Access Toolbar, and the Ribbon. The function of these features will be more

More information

Importing and Opening an Alignment

Importing and Opening an Alignment Chapter 6 Alignment Files An alignment defines the route of a road, utility line, water way, etc., and is typically comprised of both horizontal and vertical elements. Also, an alignment may include cross-sectional

More information

Developing Own Crystal Reports

Developing Own Crystal Reports Developing Own Crystal Reports 1.1.1 The Report Creation Wizard ShipWeight is delivered with a set of sample reports to be used with the Report Viewer. In many cases, the easiest way of creating your own

More information

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction What s New V 11 Preferences: Reverse mouse scroll wheel zoom direction Assign mouse scroll wheel Middle Button as Fine tune Pricing Method (Manufacturing/Design) Display- Display Long Name Parameters:

More information

DWGSee Professional User Guide

DWGSee Professional User Guide DWGSee Professional User Guide DWGSee is comprehensive software for viewing, printing, marking and sharing DWG files. It is fast, powerful and easy-to-use for every expert and beginners. Starting DWGSee

More information

ISINV Software Quick Guide

ISINV Software Quick Guide ISINV Software Quick Guide ISPAC Middleware Invoicing for MPAQ Software Copyright 1999,2000 ISPAC Solutions Inc. v1.2.07 Overview ISINV is designed to import ticket information from MPAQ, perform ticket

More information

Lesson 5 Build Transformations

Lesson 5 Build Transformations Lesson 5 Build Transformations Pentaho Data Integration, or PDI, is a comprehensive ETL platform allowing you to access, prepare, analyze and immediately derive value from both traditional and big data

More information

Photocopying and scanning

Photocopying and scanning Photocopying and scanning Logging in at the copier Scan your card using the Barcode Scanner at the copier Press in the PIN field Enter your PIN, and then press OK. 1 Photocopying 1. Position your document

More information

Embroidery Fonts Plus ( EFP ) Tutorial Guide Version 1.0505

Embroidery Fonts Plus ( EFP ) Tutorial Guide Version 1.0505 Embroidery Fonts Plus ( EFP ) Tutorial Guide Version 1.0505 1 Contents Chapter 1 System Requirements.................. 3 Chapter 2 Quick Start Installation.................. 4 System Requirements................

More information

Designing a Worksheet with Excel

Designing a Worksheet with Excel Designing a Worksheet with Excel Introduction Microsoft Office Excel 00 offers several tools that make your worksheets look attractive and professional. Without formatting, a worksheet can look confusing

More information