PEPIN MANUFACTURING INC. A Diverse Company with an InnovativeTeam Dedicated to Specialization, Quality and Service!

Transcription

1 A Diverse Company with an InnovativeTeam Dedicated to Specialization, Quality and Service!

2 Welcome to Pepin Manufacturing Pepin Manufacturing, Inc. is the fast, friendly, and flexible solution to your specific product needs. Whether you are looking for medical electrodes or medical device components, lint rollers, our own Marfree TM Urethane, or custom contract converting/fabrication, Pepin Manufacturing has the solution. Since 1993 we at Pepin Manufacturing have been exceeding the expectations of our clients with high quality products and exceptional service. We re an ISO 13485/CE certified manufacture, and are FDA registered for our medical device manufacturing. Give us a call today and find out that PMI has the problem solving capabilities, and the dedicated personnel to give you the experience, confidence, and quality you expect. Custom Conversion/Fabrication Pepin Manufacturing, Inc. is a converter/fabricator of specialty components and substrates to provide solutions for customers in a wide range of industries. PMI specializes in accurate in-line registration of many low- profile medical and industrial components and products. Whether your product requires precision rotary die-cutting, multiple-layer laminating, in-line (4) color flexographic printing, tight tolerance slitting, custom assembly and packaging, PMI has the materials, engineering knowledge, and the commitment to quality to make the difference in your product. MarFree Urethane Protect your dies and materials with Pepin Manufacturing s MarFree TM urethane film. Available in a variety of sizes and thickness. Our urethane film pays for itself by reducing wear on your dies and promoting clean precise bends. Our MarFree TM urethane is tough, safe and easy to use, no mater what your application. Most orders can ship the same day or next day! Electrodes At Pepin Manufacturing, we understand that not all medical electrodes are created equal. Pepin Manufacturing, Inc. is an ISO / CE Certified Manufacturer, and is FDA Registered with over 20 years experience in the electrotherapy market. PMI uses it s technical knowledge to create the highest quality electrodes using only the best materials and most advanced processes. PMI can assist in developing custom electrodes and packaging to meet your needs. Lint Rollers Pepin Manufacturing takes an ordinary, everyday product and adds some new features! Our Lint Busters and Hair Busters feature an extra tacky adhesive for maximum effectiveness and each adhesive sheet contains two dry edges to make peeling and disposal easy. Lint Busters and Hair Busters come in a variety of sizes, and we can customize the handles with your message, making these rollers a great promotional item. We also have display cases for floor and counters, most orders can be shipped the same day!

3 Urethane MarFree! TM Urethane from Pepin Manufacturing, Inc. Tough Urethane Film for MarFree! Bending MarFree! Urethane from PMI is the newest form of protection and cost savings for your dies and materials! Prevents Marking On Various Materials Produces Clean and Precise Bends Available in 2, 4, 6 and 12 widths,.015 &.030 thickness Reduces Wear on Dies Competitively Priced Safe and Easy to Use Most Orders Ship Same Day or Next Day Male Die Female Die MarFree! Urethane will prevent marring die marks on a wide variety of metal bending polished surfaces including stainless steel, painted metal, aluminum and polished materials. Save Time and Money By Avoiding Re-Polishing and Buying New Blanks! 12 6 Samples available upon request 4 2 www. pepinmfg.com marfree@pepinmfg.com

4 Electrodes Pepin Manufacturing, Inc. PMI electrodes For Medical Professionals Who care! Pepin Manufacturing Inc., an ISO :2003 Certified, CE Mark Registered is a leading manufacturer with over 25 years experience in the electrotherapy market. PMI uses its technical knowledge to create the highest quality electrodes using only the best materials and most advanced processes. Silver (Ag) Coated Carbon Film for Reduced Impedance, Greater Conductivity and Uniform Current Dispersion. Extra Long 6 Pure Copper Lead Wires with Dispersive Heads. Helps to prevent Wire Pull-Out from Body of Electrode. Molded.080 Wire Connections for Secure Fit. (Patented Pin Connectors) Full Electrode Line with Many Options in Sizes, Shapes and Materials, with Flexible & Durable Top Coat Materials. Reusable Gels for Optimal Electrode Life. Excellent Customer Service and Support with Competitive Pricing. Can Assist in Developing Custom Electrodes, Packaging and Private Labeling to Meet Your Needs. Usually able to Ship in 1-3 Days! Durable Topical Material Conductive (Ag) Silver Conductive Carbon Film Maximum-Use Reusable Gel Skin

5 PMI Electrode Current Dispersion The unique manufacturing processes and material used in PMI electrodes provide a uniform current dispersion throughout the desired treatment site of picture each electrode. This uniform current dispersion eliminates hot spots and provides the maximum treatment to the entire electrode surface. A leading brand electrode and a PMI electrode are placed on a Current Dispersion Meter. An electrical current is passed through each electrode for a period of 60 seconds. The electrical voltage output is identical for each electrode. Results are shown at right. Current is concentrated in a small area, creating a hot spot that is less effective. The PMI electrode displays optimal current dispersion while the leading brand treats less than 50% of the surface, mainly where the wire is placed. The difference is clear PMI electrodes are able to fully disperse the electrical current throughout the entire surface of the electrode. www. pepinmfg.com electrodes@pepinmfg.com

6 Choose material, electrode shape, and size. Item number is in light blue box. Electrode Shape All electrodes are sold 4 per pack, 20 packs per case unless marked otherwise. One electrode per package Two electrodes per package Topical Material Indicates Tricot Topical Material White Foam Tan Tricot Tan Spunlace White Spunlace Cool Blue Pinstyle - Reuseable Carbon Rubber Skin Friendly Blue Gel WF1 WF375 WF2 WF3 WT8 WT1 WT375 WT2 WT25 WT3 WTS1 WTS375 WTS2 WTS25 WTS3 WWS375 WWS2 WWS3 EW2 Round Square Oval Rectangle Round Snap Square Snap Rectangle Snap Butterfly Backlasp Backlasp w/snap 1 2.5cm cm 2 5cm 3 7.5cm.8 2cm 1 2.5cm cm 2 5cm cm 3 7.5cm 1 2.5cm cm 2 5cm cm 3 7.5cm cm 2 5cm 3 7.5cm 2 5cm WF22 WT15 WT11 WT22 WTS15 WTS22 WWS15 WWS11 WWS22 EW15 EW22 PC11 PC11NG No Gel PT22 BWT11 2 x 2 5cm x 5cm 1.5 x 1.5 4cm x 4cm 4.5cm x 4.5cm 2 x 2 5cm x 5cm 1.5 x 1.5 4cm x 4cm 2 x 2 5cm x 5cm 1.5 x 1.5 4cm x 4cm 4.5cm x 4.5cm 2 x 2 5cm x 5cm 1.5 x 1.5 4cm x 4cm 2 x 2 5cm x 5cm 4.5cm x 4.5 cm 4.5cm x 4.5cm 2 x 2 5cm x 5cm 4.5cm x 4.5cm WF1250 WF240 WT240 WT350 WTS1250 WTS240 WWS1250 WWS x 2.5 4cm x 6.5cm 2 x 4 5cm x 10cm 2 x 4 5cm x 10cm 3 x 5 7.5cm x 13cm 1.5 x 2.5 4cm x 6.5cm 2 x 4 5cm x 10cm 1.5 x 2.5 4cm x 6.5cm 2 x 4 5cm x 10cm WF153 WF13 WF35 WF47 GVK galvanic kit WF58 WT152 WT13 WT35 WT47 WTS152 WTS13 WTS58 WWS13 WWS35 WWS47 WWS58 EW13 PC13 PC13NG No Gel ESU-1 PT24 BWT x 3.5 4cm x 9cm 3 x 5 7.5cm x 13cm 4.25 x 7 11cm x 18cm 4.25 x 7 11cm x 18cm 5 x 8 13cm x 20cm 1.5 x 2.5 4cm x 6.5cm 3 x 5 7.5cm x 13cm 4.25 x 7 11cm x 18cm 1.5 x 2 4cm x 5cm 5 x 8 13cm x 20cm 3 x 5 7.5cm x 13cm 4.25 x 7 11cm x 18cm 5 x 8 13cm x 20cm 2.2 x cm x 6.5cm 2 x 4 5cm x 10cm SF375 ST8 ST cm.8 2cm 1 2.5cm ST11 BST11 4.5cm x 4.5cm 4.5cm x 4.5cm ST13 BST13 WF46 EW46 4 x 6 10cm x 15cm 4 x 6 10cm x 15cm WF1315 EW x 13 4cm x 33cm 1.5 x 13 4cm x 33cm SF x 13 4cm x 33cm

7 E-Stim Units TENS TENS Mode without Timer TENS Mode with Timer TENS-6000 Digital TENS with Timer Channels: Dual, Isolated between channels Modes: Burst, Constant, Modulation Pulse Width: 60 to 250 microseconds, adjustable Pulse Amplitude (intensity): 0 to 80 ma each channel, adjustable (500 ohm load) Pulse Frequency: 2 to 150 Hz adjustable Modulation Mode: Pulse width automatically varies is a cyclical pattern over an interval of nominally 4 seconds Burst Mode: 7 pulses per burst, 2 bursts per second, 100Hz internal frequency of burst Battery Life: 70 hour average (alkaline) Waveform: Modified square wave with zero net direct current EMS EMS-3000 Muscle Stimulator Channels: Dual, Isolated between channels Modes: Burst, Constant, Modulation Pulse Width: 60 to 250 microseconds, adjustable Pulse Amplitude (intensity): 0 to 80 ma each channel, adjustable (500 ohm load) Pulse Frequency: 2 to 150 Hz adjustable Timer: 30 Min, 60 Min, or Constant Modulation Mode: Pulse width automatically varies is a cyclical pattern over an interval of nominally 4 seconds Burst Mode: 7 pulses per burst, 2 bursts per second, 100Hz internal frequency of burst Battery Life: 70 hour average (alkaline) Waveform: Modified square wave with zero net direct current EMS-6500 Digital EMS with Timer Channels: Dual Modes: Burst, Normal, MRW, SD, Bi-Pulse Pulse Width: microseconds, adjustable Pulse Amplitude (intensity): 0 to 80 ma each channel Pulse Frequency: Variable, Hz Waveform: Asymmetric biphasic square pulse Timer: 5 to 90 Min, or constant time Compliance Timer: 60 sets of operation records, 999 hours record time COMBO Combo Unit TENS/EMS Channels: Dual, Isolated between channels Modes: Burst, Constant, Modulation Pulse Amplitude: Constant current 0 to 80 ma each channel, adjustable (500 ohm load) Pulse Frequency: Adjustable, 5, 30, 100 Hz Cycle On/Off: 1-30 sec. On Ramp: Adjustable, 1, 3, 5 seconds Battery Life: Approx. 70 hours Waveform: Modified square wave with zero net direct current Channels: Dual Modes: Synchronous (S), Constant (C), and Alternate (A) Pulse Amplitude: 0 to 80 ma peak into 500 ohm load each channel, adjustable Pulse Frequency: 2 to 120 Hz Pulse Ramp: 1 to 8 seconds Contraction: Variable Control (2-99 Sec) Relaxation: Variable Control (2-99 Sec) Waveform: Asymmetric biphasic square pulse wave with zero net direct current Compliance Timer: 60 sets of operation records, 999 hours record time The Combo T/E Unit is battery operated pulse generator that sends electrical impulses electrodes to the body and reach the nerves and underlying muscle group. This unit is a combination stimulator of TENS and EMS which can be used for muscle stimulation and pain relief. The devise is provided with two controllable output channels, each independent of each other. An electrode pair can be connected to each output channel. The intensity controls are protected by a cap to avoid accidental touch. The settings are controlled by press buttons. * All values have +/- 10% tolerance

8 INTERFERENTIAL IF-2206A Digital Piggy Back IF-2206 Digital True Sine Wave IF-4250 Analog Interferential Channels: Dual, isolated Pulse Amplitude: Adjustable, 0-60 ma into 500ohm each channel Carrier Frequency: 4000Hz fixed (channel 1) Modulating Frequency: adjustable (channel 2) Constant Mode: bps, adjustable Auto Sweep: bps, 4-45 bps, 4-set bps Frequency Shift Percent: Shifts from 30% below set frequency to 60% above then back 30% below set frequency Output Configure: Quadra polar (4 electrodes) Wave Form: Symmetrical Balanced Sine Wave Interference Pulse Frequency: bps; adjustable to 4 bps/step Pulse Duration: 125us maximum Patient Compliance Meter: Displays treatment times Pateint Lock System: Prevents patient from changing the parameters set by the physician/clinician Timer: 15 and 30 minutes GALVANIC PGS-123 Pulsed-Galvanic Stimulator Channels: Dual, Isolated Between Channels Pulse Amplitude: Adjustable, 0-60 ma into 500 Ohm each channel Carrier Frequency: 4000 Hz fixed (Ch. 1) Modulating Frequency: Adjustable (Ch. 2) Frequency Function Mode: Constant Mode (C): bps, Adjustable Auto Sweep (A): bps, 4-45 bps, 4-SET bps Frequency Shift (S): 1/1 Abruptly Shift, 6/6 Abruptly Shift, 6/6 Ramped,10/10 Abruptly Shift, 10/10 Ramped Sweep Time: 15 seconds Frequency Shift Percent: Shifts from 30% below set frequency to 60% above then back to 30% below set frequency. Output Configuration: Quadra polar (4 electrodes) Wave Form: Symmetrical Balanced Sine Wave Interference Beat Frequency: bps; adjustable to 4 bps/step MICROCURRENT Micro-2000 Analog Microcurrent Channel: Dual Pulse Width: 125 microseconds for each phase Pulse Amplitude: Adjustable 0-50 ma peak at 500 S/channel Carrier Frequency: 4000 Hz fixed Difference Frequency: (1 +/- 0.5) ~(250+/-10%) Hz adjustable Interference Frequency: Channel B Auto Sweep: 4-45 bps, bps, 4-set Constant Mode: bps, adjustable Waveform: Symmetrical Biphasic Square Four Frequency Shift: Continuous, 1/1 abrupt, 8/8 abrupt, 10/10 ramped Channels: Single Output Mode: Synchronous or Alternation. Alternation mode-led alternates between green and red color Pulse Rate: Hz Wave Form: Positive or negative wave form Pulse Duration: 5 us IntraPulse Interval: 100 us. Channels: Dual Output Waveform: Modified square DC biphasic pulses of 0.3Hz, 8Hz, and 80Hz changing polarity at intervals of 1 seconds. Timer: 20, 40 minutes and constant Frequency: 0.3, 8 and 80Hz Output Voltage: 12 Volts * All values have +/- 10% tolerance www. pepinmfg.com sales@pepinmfg.com

9 Conductive Garments www. pepinmfg.com

10 Iontophoresis Electrodes Comfort/IO Iontophoresis Electrodes from Pepin Manufacturing, Inc. With over 20 years experience in the electrotherapy market, we used our technical knowledge to create a high quality iontophoresis system using only the best materials and most advanced processes. PMI understands what it takes to make the very best iontophorresis electrodes and achieves excellence in quality through: Buffered Return Electrode with excellent current dispersion and lower impedance. Larger surface area for greater comfort during treatment. Buffered gel maintains optimum ph levels. Soft and conformable Buffered Active Electrode with excellent adhesion to minimize leakage. User-friendly positioning tabs. Available in four sizes to accommodate varying treatment sites. Competitive pricing. Private labeling available on qualified accounts. Small CIO15 1.5cc/4.0mA Medium CIO25 2.5cc/4.0mA Large CIO40 4.0cc/4.0mA Butterfly CIO20 2.0cc/4.0mA www. pepinmfg.com sales@pepinmfg.com

11 Electrotherapy Accessories Rechargeable Batteries 9 volt Ni-MH 8.4V MH-G984 9 volt Nicad 8.4V G-984 AA Rechargeable Battery.... PMH1800 Charger Units 9 volt Battery Charger I-7785 AA Battery Charger WY-107UL 14 long 44 long 72 long Lead Wires 44 lead wire set W2000 for TENS and EMS Bifurcating Lead Wire BI Flex Lead Cable W7200 Snap Adaptors 4 Snap Adaptor WSA20 with.080 pin connector Marketing Materials Electrode Placement Chart.... EPC100 Pain Relieving Gel BioFreeze - 4 oz. tube BioFreeze - 3 oz. stick BioFreeze - 16 oz. bottle www. pepinmfg.com info@pepinmfg.com

12 We re here to serve you - Give us a call! www. pepinmfg.com sales@pepinmfg.com