############################## # cut from beginning inthere # ############################## Mar 15 00:04:40 linux sudo: andrzej : TTY=pts/3 ;
|
|
|
- Adam Riley
- 10 years ago
- Views:
Transcription
1 ############################## # cut from beginning inthere # ############################## Mar 15 00:04:40 linux sudo: andrzej : TTY=pts/3 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 15 00:04:41 linux sudo: andrzej : TTY=pts/3 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 15 00:05:02 linux kernel: SCSI subsystem initialized Mar 15 00:05:02 linux kernel: st: Version , fixed bufsize 32768, s/g segs 256 Mar 15 00:05:02 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:05:03 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:05:20 linux kernel: pnp: Device 00:0a disabled. Mar 15 00:05:20 linux kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 15 00:05:20 linux kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 15 00:05:20 linux kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 15 00:05:20 linux kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 15 00:05:20 linux kernel: pnp: Device 00:0a activated. Mar 15 00:05:20 linux kernel: parport: PnPBIOS parport detected. Mar 15 00:05:20 linux kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Mar 15 00:05:20 linux kernel: lp0: using parport0 (interrupt-driven). Mar 15 00:05:22 linux kernel: pnp: Device 00:0a disabled. Mar 15 00:05:22 linux kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 15 00:05:22 linux kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 15 00:05:22 linux kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 15 00:05:22 linux kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 15 00:05:23 linux kernel: ppa: Version 2.07 (for Linux 2.4.x) Mar 15 00:05:23 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:05:23 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:05:31 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:05:31 linux kernel: end_request: I/O error, dev fd0, sector 0 Mar 15 00:48:52 linux syslog-ng[2277]: STATS: dropped 0 Mar 15 01:02:41 linux gconfd (andrzej-3691): Otrzymano sygna 15, poprawne zako czenie Mar 15 01:02:42 linux gconfd (andrzej-3691): Zako czenie Mar 15 01:02:45 linux shutdown[16774]: shutting down for system reboot Mar 15 01:02:47 linux init: Switching to runlevel: 6 Mar 15 01:02:49 linux kernel: bootsplash: status on console 0 changed to on Mar 15 01:02:49 linux auditd[2841]: The audit daemon is exiting. Mar 15 01:02:49 linux kernel: audit( :7): audit_pid=0 old=2841 by auid= Mar 15 01:02:51 linux sshd[3053]: Received signal 15; terminating. Mar 15 01:02:52 linux kernel: Kernel logging (proc) stopped. Mar 15 01:02:52 linux kernel: Kernel log daemon terminating. Mar 15 01:02:53 linux syslog-ng[2277]: syslog-ng version going down Mar 16 00:39:27 linux syslog-ng[2432]: syslog-ng version starting Mar 16 00:39:29 linux rchal: CPU frequency scaling is not supported by your processor. Mar 16 00:39:29 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 16 00:39:29 linux rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 16 00:39:30 linux network: Starting the DHCP DBUS Daemon Mar 16 00:39:30 linux network: Starting the NetworkManagerDispatcher Mar 16 00:39:30 linux network: Starting the NetworkManager Mar 16 00:39:30 linux dhcdbd: Started up. Mar 16 00:39:31 linux syslog-ng[2432]: Changing permissions on special file /dev/xconsole Mar 16 00:39:31 linux syslog-ng[2432]: Changing permissions on special file /dev/tty10 Mar 16 00:39:31 linux mdnsresponder (Engineering Build) (Nov :30:24) [2947]: starting Mar 16 00:39:31 linux auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Mar 16 00:39:32 linux auditd[2985]: Init complete, auditd listening for events Mar 16 00:39:32 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 16 00:39:32 linux kernel: NET: Registered protocol family 10 Mar 16 00:39:32 linux kernel: lo: Disabled Privacy Extensions Mar 16 00:39:32 linux kernel: IPv6 over IPv4 tunneling driver Mar 16 00:39:32 linux kernel: ip6_tables: (C) Netfilter Core Team Mar 16 00:39:32 linux kernel: ip_tables: (C) Netfilter Core Team Mar 16 00:39:32 linux kernel: Netfilter messages via NETLINK v0.30. Mar 16 00:39:32 linux kernel: ip_conntrack version 2.4 (4095 buckets, max) bytes per conntrack Mar 16 00:39:32 linux kernel: ACPI: Power Button (FF) [PWRF] Mar 16 00:39:32 linux kernel: ACPI: Power Button (CM) [PWRB] Mar 16 00:39:32 linux kernel: ACPI: Sleep Button (CM) [SLPB] Mar 16 00:39:32 linux kernel: powernow: This module only works with AMD K7 CPUs Mar 16 00:39:32 linux kernel: usb 4-2: new high speed USB device using ehci_hcd and address 4 Mar 16 00:39:32 linux kernel: usb 4-2: new device found, idvendor=0924, idproduct=3d52 Mar 16 00:39:32 linux kernel: usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3 Mar 16 00:39:32 linux kernel: usb 4-2: Product: Xerox Phaser 6100 Color Laser Printer Series Mar 16 00:39:34 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 00:39:34 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 00:39:32 linux kernel: usb 4-2: Manufacturer: XEROX CO., LTD Mar 16 00:39:34 linux kernel: usb 4-2: SerialNumber: REP Mar 16 00:39:34 linux kernel: usb 4-2: configuration #1 chosen from 1 choice Mar 16 00:39:34 linux kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0924 pid 0x3D52 Mar 16 00:39:34 linux kernel: usbcore: registered new driver usblp Mar 16 00:39:34 linux kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Mar 16 00:39:34 linux kernel: audit( :3): audit_pid=2985 old=0 by auid= Mar 16 00:39:34 linux kernel: eth3: link up, 100Mbps, full-duplex, lpa 0x45E1 Mar 16 00:39:36 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Mar 16 00:39:36 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Mar 16 00:39:36 linux powersaved[3233]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 00:39:36 linux powersaved[3233]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 00:39:36 linux sshd[3241]: Server listening on :: port 22. Mar 16 00:39:36 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 00:39:36 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 00:39:37 linux kernel: NET: Registered protocol family 17 Mar 16 00:39:38 linux dhclient: DHCPDISCOVER on eth3 to port 67 interval 2 Mar 16 00:39:38 linux dhclient: DHCPOFFER from Mar 16 00:39:38 linux /usr/sbin/cron[3355]: (CRON) STARTUP (V5.0) Mar 16 00:39:38 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 00:39:39 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 00:39:39 linux SuSEfirewall2: Warning: no interface active Mar 16 00:39:39 linux SuSEfirewall2: batch committing... Mar 16 00:39:40 linux SuSEfirewall2: Firewall rules successfully set Mar 16 00:39:42 linux kernel: [drm] Initialized drm Mar 16 00:39:42 linux kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 Mar 16 00:39:42 linux kernel: [drm] Initialized radeon on minor 0
2 Mar 16 00:39:43 linux dhclient: DHCPREQUEST on eth3 to port 67 Mar 16 00:39:43 linux dhclient: DHCPACK from Mar 16 00:39:43 linux dhclient: bound to renewal in seconds. Mar 16 00:39:43 linux kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. Mar 16 00:39:43 linux kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode Mar 16 00:39:43 linux kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode Mar 16 00:39:43 linux kernel: agpgart: Putting AGP V2 device at 0000:01:00.1 into 1x mode Mar 16 00:39:44 linux kernel: [drm] Setting GART location based on new memory map Mar 16 00:39:44 linux kernel: [drm] Loading R200 Microcode Mar 16 00:39:44 linux kernel: [drm] writeback test succeeded in 1 usecs Mar 16 00:39:46 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 00:39:46 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 00:39:46 linux SuSEfirewall2: Warning: no interface active Mar 16 00:39:46 linux SuSEfirewall2: batch committing... Mar 16 00:39:46 linux SuSEfirewall2: Firewall rules successfully set Mar 16 00:39:54 linux zmd: Daemon (WARN): Not starting remote web server Mar 16 00:39:54 linux kernel: eth3: no IPv6 routers present Mar 16 00:40:17 linux gconfd (andrzej-3919): uruchamianie (wersja ), pid 3919, u ytkownik "andrzej" Mar 16 00:40:17 linux gconfd (andrzej-3919): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 00:40:17 linux gconfd (andrzej-3919): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 00:40:17 linux gconfd (andrzej-3919): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 00:40:17 linux gconfd (andrzej-3919): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 00:45:02 linux su: (to beagleindex) root on none Mar 16 00:45:06 linux su: (to beagleindex) root on none Mar 16 00:55:00 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 00:55:00 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 00:55:23 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 00:55:24 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 00:55:47 linux su: (to root) andrzej on /dev/pts/1 Mar 16 00:59:11 linux su: (to root) andrzej on /dev/pts/1 Mar 16 01:00:53 linux sudo: andrzej : TTY=pts/2 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:00:54 linux sudo: andrzej : TTY=pts/2 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:02:33 linux sudo: andrzej : TTY=pts/3 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:02:34 linux sudo: andrzej : TTY=pts/3 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:08:47 linux sudo: andrzej : TTY=pts/5 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:08:48 linux sudo: andrzej : TTY=pts/5 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:10:28 linux shutdown[4862]: shutting down for system reboot Mar 16 01:10:28 linux init: Switching to runlevel: 6 Mar 16 01:10:29 linux kernel: bootsplash: status on console 0 changed to on Mar 16 01:10:30 linux auditd[2985]: The audit daemon is exiting. Mar 16 01:10:30 linux kernel: audit( :7): audit_pid=0 old=2985 by auid= Mar 16 01:10:31 linux zmd: ShutdownManager (WARN): Preparing to shut down... Mar 16 01:10:31 linux zmd: ShutdownManager (WARN): Shutting down daemon... Mar 16 01:10:32 linux sshd[3241]: Received signal 15; terminating. Mar 16 01:10:38 linux kernel: Kernel logging (proc) stopped. Mar 16 01:10:38 linux kernel: Kernel log daemon terminating. Mar 16 01:10:39 linux syslog-ng[2432]: syslog-ng version going down Mar 16 01:11:50 linux syslog-ng[2469]: syslog-ng version starting Mar 16 01:11:52 linux rchal: CPU frequency scaling is not supported by your processor. Mar 16 01:11:52 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 16 01:11:52 linux rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 16 01:11:52 linux network: Starting the DHCP DBUS Daemon Mar 16 01:11:52 linux network: Starting the NetworkManagerDispatcher Mar 16 01:11:52 linux dhcdbd: Started up. Mar 16 01:11:52 linux network: Starting the NetworkManager Mar 16 01:11:53 linux syslog-ng[2469]: Changing permissions on special file /dev/xconsole Mar 16 01:11:53 linux syslog-ng[2469]: Changing permissions on special file /dev/tty10 Mar 16 01:11:53 linux mdnsresponder (Engineering Build) (Nov :30:24) [2946]: starting Mar 16 01:11:53 linux auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Mar 16 01:11:53 linux auditd[2986]: Init complete, auditd listening for events Mar 16 01:11:55 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 16 01:11:55 linux kernel: NET: Registered protocol family 10 Mar 16 01:11:55 linux kernel: lo: Disabled Privacy Extensions Mar 16 01:11:55 linux kernel: IPv6 over IPv4 tunneling driver Mar 16 01:11:55 linux kernel: ip6_tables: (C) Netfilter Core Team Mar 16 01:11:55 linux kernel: ip_tables: (C) Netfilter Core Team Mar 16 01:11:55 linux kernel: Netfilter messages via NETLINK v0.30. Mar 16 01:11:55 linux kernel: ip_conntrack version 2.4 (4095 buckets, max) bytes per conntrack Mar 16 01:11:55 linux kernel: ACPI: Power Button (FF) [PWRF] Mar 16 01:11:55 linux kernel: ACPI: Power Button (CM) [PWRB] Mar 16 01:11:55 linux kernel: ACPI: Sleep Button (CM) [SLPB] Mar 16 01:11:55 linux kernel: powernow: This module only works with AMD K7 CPUs Mar 16 01:11:55 linux kernel: audit( :3): audit_pid=2986 old=0 by auid= Mar 16 01:11:56 linux kernel: eth3: link up, 100Mbps, full-duplex, lpa 0x45E1 Mar 16 01:11:57 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Mar 16 01:11:57 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Mar 16 01:11:58 linux powersaved[3137]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 01:11:58 linux powersaved[3137]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 01:11:59 linux sshd[3188]: Server listening on :: port 22. Mar 16 01:11:59 linux kernel: NET: Registered protocol family 17 Mar 16 01:12:00 linux dhclient: DHCPDISCOVER on eth3 to port 67 interval 4 Mar 16 01:12:00 linux dhclient: DHCPOFFER from Mar 16 01:12:00 linux /usr/sbin/cron[3271]: (CRON) STARTUP (V5.0) Mar 16 01:12:00 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 01:12:00 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 01:12:01 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 01:12:01 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 01:12:01 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 01:12:01 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 01:12:01 linux SuSEfirewall2: Warning: no interface active Mar 16 01:12:02 linux SuSEfirewall2: batch committing... Mar 16 01:12:03 linux SuSEfirewall2: Firewall rules successfully set Mar 16 01:12:04 linux kernel: [drm] Initialized drm Mar 16 01:12:04 linux kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 Mar 16 01:12:04 linux kernel: [drm] Initialized radeon on minor 0
3 Mar 16 01:12:05 linux dhclient: DHCPREQUEST on eth3 to port 67 Mar 16 01:12:05 linux dhclient: DHCPACK from Mar 16 01:12:05 linux dhclient: bound to renewal in seconds. Mar 16 01:12:05 linux kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. Mar 16 01:12:05 linux kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode Mar 16 01:12:05 linux kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode Mar 16 01:12:05 linux kernel: agpgart: Putting AGP V2 device at 0000:01:00.1 into 1x mode Mar 16 01:12:06 linux kernel: [drm] Setting GART location based on new memory map Mar 16 01:12:06 linux kernel: [drm] Loading R200 Microcode Mar 16 01:12:06 linux kernel: [drm] writeback test succeeded in 1 usecs Mar 16 01:12:08 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 01:12:08 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 01:12:08 linux SuSEfirewall2: Warning: no interface active Mar 16 01:12:08 linux SuSEfirewall2: batch committing... Mar 16 01:12:08 linux SuSEfirewall2: Firewall rules successfully set Mar 16 01:12:11 linux zmd: Daemon (WARN): Not starting remote web server Mar 16 01:12:16 linux kernel: eth3: no IPv6 routers present Mar 16 01:12:41 linux gconfd (andrzej-3921): uruchamianie (wersja ), pid 3921, u ytkownik "andrzej" Mar 16 01:12:42 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 01:12:42 linux gconfd (andrzej-3921): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 01:12:42 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 01:12:42 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 01:14:19 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:14:20 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:15:09 linux su: (to root) andrzej on /dev/pts/3 Mar 16 01:18:10 linux su: (to root) andrzej on /dev/pts/1 Mar 16 01:18:22 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:18:23 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:19:48 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC/slots ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:19:49 linux sudo: andrzej : TTY=pts/2 ; PWD=/usr/share/BOINC/slots ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:20:50 linux sudo: andrzej : TTY=pts/2 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 01:20:51 linux sudo: andrzej : TTY=pts/2 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 02:11:50 linux syslog-ng[2469]: STATS: dropped 0 Mar 16 02:12:03 linux zmd: ShutdownManager (WARN): Preparing to sleep... Mar 16 02:12:03 linux zmd: ShutdownManager (WARN): Going to sleep, waking up at 03/17/ :02:03 Mar 16 03:11:51 linux syslog-ng[2469]: STATS: dropped 0 Mar 16 04:11:51 linux syslog-ng[2469]: STATS: dropped 0 Mar 16 04:27:37 linux sudo: andrzej : TTY=pts/3 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 04:27:38 linux sudo: andrzej : TTY=pts/3 ; PWD=/home/andrzej ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 16 04:29:55 linux hp: unable to open /var/run/hpiod.port: No such file or directory: api/hplip_api.c 93 Mar 16 04:29:55 linux hp: unable to connect hpiod socket 2208: Connection refused: api/hplip_api.c 721 Mar 16 04:29:55 linux hp: unable to send ProbeDevices: Broken pipe Mar 16 04:29:58 linux python: [4750] error: Unable to set locale. Mar 16 04:29:59 linux hp: unable to open /var/run/hpiod.port: No such file or directory: api/hplip_api.c 93 Mar 16 04:29:59 linux hp: unable to connect hpiod socket 2208: Connection refused: api/hplip_api.c 721 Mar 16 04:29:59 linux hp: unable to send ProbeDevices: Broken pipe Mar 16 04:30:01 linux python: [4768] error: Unable to set locale. Mar 16 05:06:43 linux gconfd (andrzej-3921): Otrzymano sygna SIGHUP, prze adowywanie wszystkich baz Mar 16 05:06:43 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 05:06:43 linux gconfd (andrzej-3921): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 05:06:43 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 05:06:43 linux gconfd (andrzej-3921): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 05:06:45 linux gconfd (andrzej-3921): Otrzymano sygna 15, poprawne zako czenie Mar 16 05:06:45 linux gconfd (andrzej-3921): Zako czenie Mar 16 05:06:51 linux shutdown[5086]: shutting down for system reboot Mar 16 05:06:55 linux init: Switching to runlevel: 6 Mar 16 05:06:57 linux kernel: bootsplash: status on console 0 changed to on Mar 16 05:06:58 linux auditd[2986]: The audit daemon is exiting. Mar 16 05:06:58 linux kernel: audit( :7): audit_pid=0 old=2986 by auid= Mar 16 05:07:01 linux sshd[3188]: Received signal 15; terminating. Mar 16 05:07:21 linux kernel: Kernel logging (proc) stopped. Mar 16 05:07:21 linux kernel: Kernel log daemon terminating. Mar 16 05:07:22 linux syslog-ng[2469]: syslog-ng version going down Mar 16 09:49:22 linux syslog-ng[2433]: syslog-ng version starting Mar 16 09:49:22 linux syslog: Kernel log daemon terminating. Mar 16 09:49:24 linux rchal: CPU frequency scaling is not supported by your processor. Mar 16 09:49:24 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 16 09:49:24 linux rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 16 09:49:25 linux network: Starting the DHCP DBUS Daemon Mar 16 09:49:25 linux network: Starting the NetworkManagerDispatcher Mar 16 09:49:26 linux network: Starting the NetworkManager Mar 16 09:49:26 linux dhcdbd: Started up. Mar 16 09:49:26 linux syslog-ng[2433]: Changing permissions on special file /dev/xconsole Mar 16 09:49:26 linux syslog-ng[2433]: Changing permissions on special file /dev/tty10 Mar 16 09:49:26 linux mdnsresponder (Engineering Build) (Nov :30:24) [2923]: starting Mar 16 09:49:26 linux mdnsresponder: ERROR: bind(listenfd, (struct sockaddr *) &laddr, sizeof(laddr)); failed: Address already Mar 16 09:49:26 linux mdnsresponder: ERROR: udsserver_init: Address already Mar 16 09:49:26 linux mdnsresponder (Engineering Build) (Nov :30:24) [2923]: stopping Mar 16 09:49:27 linux auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Mar 16 09:49:27 linux auditd[2947]: Init complete, auditd listening for events Mar 16 09:49:27 linux nscd: 3044 /var/run/nscd/nscd.pid: Permission denied Mar 16 09:49:27 linux nscd: 3044 cannot create /var/run/nscd/passwd; no persistent database used Mar 16 09:49:27 linux nscd: 3044 cannot create /var/run/nscd/group; no persistent database used Mar 16 09:49:27 linux nscd: 3044 cannot create /var/run/nscd/hosts; no sharing possible Mar 16 09:49:27 linux nscd: 3044 /var/run/nscd/socket: Permission denied Mar 16 09:49:30 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 09:49:30 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 09:49:31 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Mar 16 09:49:31 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Mar 16 09:49:31 linux powersaved[3224]: WARNING (CpufreqManagement:51) No capability cpufreq_control
4 Mar 16 09:49:31 linux powersaved[3224]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 09:49:31 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 09:49:31 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 09:49:33 linux dhclient: DHCPDISCOVER on eth3 to port 67 interval 4 Mar 16 09:49:33 linux dhclient: DHCPOFFER from Mar 16 09:49:34 linux /usr/sbin/cron[3282]: (CRON) STARTUP (V5.0) Mar 16 09:49:34 linux /usr/sbin/cron[3282]: (*system*) WRONG FILE OWNER (/etc/crontab) Mar 16 09:49:34 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 09:49:34 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 09:49:34 linux SuSEfirewall2: Warning: no interface active Mar 16 09:49:34 linux /usr/sbin/cron[3282]: (*system*) WRONG FILE OWNER (/etc/cron.d/yast2-online-update) Mar 16 09:49:35 linux SuSEfirewall2: batch committing... Mar 16 09:49:36 linux SuSEfirewall2: Firewall rules successfully set Mar 16 09:49:38 linux dhclient: DHCPREQUEST on eth3 to port 67 Mar 16 09:49:38 linux dhclient: DHCPACK from Mar 16 09:49:38 linux dhclient: bound to renewal in seconds. Mar 16 09:49:48 linux zmd: Daemon (WARN): Not starting remote web server Mar 16 09:50:40 linux gconfd (andrzej-3838): uruchamianie (wersja ), pid 3838, u ytkownik "andrzej" Mar 16 09:50:40 linux gconfd (andrzej-3838): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 09:50:40 linux gconfd (andrzej-3838): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 09:50:40 linux gconfd (andrzej-3838): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 09:50:40 linux gconfd (andrzej-3838): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 09:51:12 linux su: (to root) andrzej on /dev/pts/1 Mar 16 09:52:01 linux su: (to root) andrzej on /dev/pts/1 Mar 16 09:52:30 linux su: (to root) andrzej on /dev/pts/1 Mar 16 09:54:35 linux su: (to root) andrzej on /dev/pts/1 Mar 16 09:57:50 linux su: (to root) andrzej on /dev/pts/1 Mar 16 09:59:42 linux su: (to root) andrzej on /dev/pts/2 Mar 16 10:05:51 linux su: FAILED SU (to root) andrzej on none Mar 16 10:06:29 linux su: (to root) andrzej on /dev/pts/1 Mar 16 10:49:23 linux syslog-ng[2433]: STATS: dropped 0 Mar 16 10:49:37 linux zmd: ShutdownManager (WARN): Preparing to sleep... Mar 16 10:49:37 linux zmd: ShutdownManager (WARN): Going to sleep, waking up at 03/17/ :39:37 Mar 16 11:27:32 linux su: (to root) andrzej on /dev/pts/1 Mar 16 11:36:32 linux gconfd (andrzej-3838): Otrzymano sygna 15, poprawne zako czenie Mar 16 11:36:32 linux gconfd (andrzej-3838): Zako czenie Mar 16 11:36:42 linux shutdown[4736]: shutting down for system reboot Mar 16 11:36:43 linux init: Switching to runlevel: 6 Mar 16 11:36:46 linux auditd[2947]: The audit daemon is exiting. Mar 16 11:36:49 linux syslog-ng[2433]: syslog-ng version going down Mar 16 12:59:41 linux syslog-ng[2435]: syslog-ng version starting Mar 16 12:59:41 linux syslog: Kernel log daemon terminating. Mar 16 12:59:43 linux rchal: CPU frequency scaling is not supported by your processor. Mar 16 12:59:43 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 16 12:59:44 linux rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 16 12:59:44 linux network: Starting the DHCP DBUS Daemon Mar 16 12:59:45 linux network: Starting the NetworkManagerDispatcher Mar 16 12:59:45 linux network: Starting the NetworkManager Mar 16 12:59:45 linux dhcdbd: Started up. Mar 16 12:59:45 linux syslog-ng[2435]: Changing permissions on special file /dev/xconsole Mar 16 12:59:45 linux syslog-ng[2435]: Changing permissions on special file /dev/tty10 Mar 16 12:59:45 linux mdnsresponder (Engineering Build) (Nov :30:24) [2928]: starting Mar 16 12:59:45 linux mdnsresponder: ERROR: bind(listenfd, (struct sockaddr *) &laddr, sizeof(laddr)); failed: Address already Mar 16 12:59:45 linux mdnsresponder: ERROR: udsserver_init: Address already Mar 16 12:59:45 linux mdnsresponder (Engineering Build) (Nov :30:24) [2928]: stopping Mar 16 12:59:46 linux auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Mar 16 12:59:46 linux auditd[2974]: Init complete, auditd listening for events Mar 16 12:59:47 linux nscd: 3078 /var/run/nscd/nscd.pid: Permission denied Mar 16 12:59:47 linux nscd: 3078 cannot create /var/run/nscd/passwd; no persistent database used Mar 16 12:59:47 linux nscd: 3078 cannot create /var/run/nscd/group; no persistent database used Mar 16 12:59:47 linux nscd: 3078 cannot create /var/run/nscd/hosts; no sharing possible Mar 16 12:59:47 linux nscd: 3078 /var/run/nscd/socket: Permission denied Mar 16 12:59:47 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 12:59:47 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 12:59:48 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 12:59:48 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 12:59:49 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Mar 16 12:59:49 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Mar 16 12:59:50 linux powersaved[3218]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 12:59:50 linux powersaved[3218]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 12:59:53 linux dhclient: DHCPDISCOVER on eth3 to port 67 interval 4 Mar 16 12:59:53 linux dhclient: DHCPOFFER from Mar 16 12:59:54 linux /usr/sbin/cron[3304]: (CRON) STARTUP (V5.0) Mar 16 12:59:54 linux /usr/sbin/cron[3304]: (*system*) WRONG FILE OWNER (/etc/crontab) Mar 16 12:59:54 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 12:59:54 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 12:59:54 linux /usr/sbin/cron[3304]: (*system*) WRONG FILE OWNER (/etc/cron.d/yast2-online-update) Mar 16 12:59:54 linux SuSEfirewall2: Warning: no interface active Mar 16 12:59:55 linux SuSEfirewall2: batch committing... Mar 16 12:59:57 linux SuSEfirewall2: Firewall rules successfully set Mar 16 12:59:58 linux dhclient: DHCPREQUEST on eth3 to port 67 Mar 16 12:59:58 linux dhclient: DHCPACK from Mar 16 12:59:58 linux dhclient: bound to renewal in seconds. Mar 16 13:00:07 linux zmd: Daemon (WARN): Not starting remote web server Mar 16 13:00:36 linux gconfd (andrzej-3819): uruchamianie (wersja ), pid 3819, u ytkownik "andrzej" Mar 16 13:00:36 linux gconfd (andrzej-3819): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 13:00:36 linux gconfd (andrzej-3819): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 13:00:36 linux gconfd (andrzej-3819): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 13:00:36 linux gconfd (andrzej-3819): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 13:02:54 linux su: FAILED SU (to root) andrzej on /dev/pts/1
![255.255.255 port 67 interval 4 Mar 16 09:49:33 linux dhclient: DHCPOFFER from 10.2.0.2 Mar 16 09:49:34 linux /usr/sbin/cron[3282]: (CRON) STARTUP (V5.](/docs-images/45/11467899/images/page_4.jpg "0) Mar 16 09:49:34 linux /usr/sbin/cron[3282]: (*system*) WRONG FILE OWNER (/etc/crontab) Mar 16 09:49:34 linux SuSEfirewall2: Warning: ip6tables does not support state matching.")
5 Mar 16 13:03:06 linux su: (to root) andrzej on /dev/pts/1 Mar 16 13:03:54 linux login[4040]: FATAL: cannot change permissions of TTY: Operacja niedozwolona Mar 16 13:10:48 linux su: (to root) andrzej on /dev/pts/1 Mar 16 13:11:00 linux su: (to root) andrzej on /dev/pts/1 Mar 16 13:11:47 linux gconfd (andrzej-3819): Otrzymano sygna 15, poprawne zako czenie Mar 16 13:11:47 linux gconfd (andrzej-3819): Zako czenie Mar 16 13:12:23 linux gconfd (andrzej-4296): uruchamianie (wersja ), pid 4296, u ytkownik "andrzej" Mar 16 13:12:23 linux gconfd (andrzej-4296): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 13:12:23 linux gconfd (andrzej-4296): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 13:12:23 linux gconfd (andrzej-4296): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 13:12:23 linux gconfd (andrzej-4296): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a Mar 16 13:35:50 linux hald: mounted /dev/sda1 on behalf of uid 1000 Mar 16 13:40:03 linux hald: unmounted /dev/sda1 from '/media/disk' on behalf of uid 1000 Mar 16 13:40:25 linux hald: mounted /dev/sda1 on behalf of uid 1000 Mar 16 13:40:36 linux hald: unmounted /dev/sda1 from '/media/disk' on behalf of uid 1000 Mar 16 13:48:36 linux su: (to root) andrzej on /dev/pts/1 Mar 16 13:50:04 linux su: (to root) andrzej on /dev/pts/1 Mar 16 13:59:41 linux syslog-ng[2435]: STATS: dropped 0 Mar 16 13:59:55 linux zmd: ShutdownManager (WARN): Preparing to sleep... Mar 16 13:59:55 linux zmd: ShutdownManager (WARN): Going to sleep, waking up at 03/17/ :49:55 Mar 16 14:20:26 linux su: (to root) andrzej on /dev/pts/1 Mar 16 14:28:38 linux login[5135]: FAILED LOGIN 1 FROM /dev/tty1 FOR UNKNOWN, U ytkownik nieznany w module uwierzytelniania ni szego poziomu Mar 16 14:29:12 linux shutdown[5184]: shutting down for system reboot Mar 16 14:29:12 linux init: Switching to runlevel: 6 Mar 16 14:29:14 linux auditd[2974]: The audit daemon is exiting. Mar 16 14:29:16 linux gconfd (andrzej-4296): Otrzymano sygna 15, poprawne zako czenie Mar 16 14:29:16 linux gconfd (andrzej-4296): Zako czenie Mar 16 14:29:17 linux syslog-ng[2435]: syslog-ng version going down Mar 16 14:30:31 linux syslog-ng[2430]: syslog-ng version starting Mar 16 14:30:31 linux syslog: Kernel log daemon terminating. Mar 16 14:30:33 linux rchal: CPU frequency scaling is not supported by your processor. Mar 16 14:30:33 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 16 14:30:33 linux rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 16 14:30:34 linux network: Starting the DHCP DBUS Daemon Mar 16 14:30:34 linux network: Starting the NetworkManagerDispatcher Mar 16 14:30:34 linux dhcdbd: Started up. Mar 16 14:30:34 linux network: Starting the NetworkManager Mar 16 14:30:34 linux syslog-ng[2430]: Changing permissions on special file /dev/xconsole Mar 16 14:30:34 linux syslog-ng[2430]: Changing permissions on special file /dev/tty10 Mar 16 14:30:34 linux mdnsresponder (Engineering Build) (Nov :30:24) [2905]: starting Mar 16 14:30:34 linux mdnsresponder: ERROR: bind(listenfd, (struct sockaddr *) &laddr, sizeof(laddr)); failed: Address already Mar 16 14:30:34 linux mdnsresponder: ERROR: udsserver_init: Address already Mar 16 14:30:34 linux mdnsresponder (Engineering Build) (Nov :30:24) [2905]: stopping Mar 16 14:30:35 linux auditd: Config file /etc/audit/auditd.conf doesn't exist, skipping Mar 16 14:30:36 linux auditd[2955]: Init complete, auditd listening for events Mar 16 14:30:36 linux nscd: 3035 /var/run/nscd/nscd.pid: Permission denied Mar 16 14:30:36 linux nscd: 3035 cannot create /var/run/nscd/passwd; no persistent database used Mar 16 14:30:36 linux nscd: 3035 cannot create /var/run/nscd/group; no persistent database used Mar 16 14:30:36 linux nscd: 3035 cannot create /var/run/nscd/hosts; no sharing possible Mar 16 14:30:36 linux nscd: 3035 /var/run/nscd/socket: Permission denied Mar 16 14:30:38 linux rcpowersaved: s2ram does not know your machine. See 's2ram -i' for details. (127) Mar 16 14:30:38 linux rcpowersaved: Use SUSPEND2RAM_FORCE=yes to override this detection. Mar 16 14:30:39 linux powersaved[3125]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 14:30:39 linux powersaved[3125]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 16 14:30:39 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 14:30:39 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 14:30:39 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xservers Mar 16 14:30:39 linux logger: /etc/init.d/xdm: No changes for /etc/x11/xdm/xdm-config Mar 16 14:30:43 linux /usr/sbin/cron[3287]: (CRON) STARTUP (V5.0) Mar 16 14:30:43 linux /usr/sbin/cron[3287]: (*system*) WRONG FILE OWNER (/etc/crontab) Mar 16 14:30:43 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 16 14:30:43 linux /usr/sbin/cron[3287]: (*system*) WRONG FILE OWNER (/etc/cron.d/yast2-online-update) Mar 16 14:30:43 linux SuSEfirewall2: Setting up rules from /etc/sysconfig/susefirewall2... Mar 16 14:30:43 linux SuSEfirewall2: Warning: no interface active Mar 16 14:30:44 linux SuSEfirewall2: batch committing... Mar 16 14:30:44 linux SuSEfirewall2: Firewall rules successfully set Mar 16 14:30:45 linux dhclient: DHCPDISCOVER on eth3 to port 67 interval 3 Mar 16 14:30:45 linux dhclient: DHCPOFFER from Mar 16 14:30:50 linux dhclient: DHCPREQUEST on eth3 to port 67 Mar 16 14:30:50 linux dhclient: DHCPACK from Mar 16 14:30:50 linux dhclient: bound to renewal in seconds. Mar 16 14:31:02 linux zmd: Daemon (WARN): Not starting remote web server Mar 16 14:31:28 linux gconfd (andrzej-3808): uruchamianie (wersja ), pid 3808, u ytkownik "andrzej" Mar 16 14:31:28 linux gconfd (andrzej-3808): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory" do r ód a Mar 16 14:31:28 linux gconfd (andrzej-3808): Uzyskano adres "xml:readwrite:/home/andrzej/.gconf" do zapisywalnego r ód a Mar 16 14:31:28 linux gconfd (andrzej-3808): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults" do r ód a Mar 16 14:31:28 linux gconfd (andrzej-3808): Uzyskano adres "xml:readonly:/etc/opt/gnome/gconf/gconf.xml.schemas" do r ód a
syslog - centralized logging
syslog - centralized logging David Morgan A logging system Conforming programs emit categorized messages Messages are candidates for logging syslog handles the logging performed by syslogd per /etc/syslog.conf
RedHat (RHEL) System Administration Course Summary
Contact Us: (616) 875-4060 RedHat (RHEL) System Administration Course Summary Length: 5 Days Prerequisite: RedHat fundamentals course Recommendation Statement: Students should have some experience with
Red Hat Linux Administration II Installation, Configuration, Software and Troubleshooting
Course ID RHL200 Red Hat Linux Administration II Installation, Configuration, Software and Troubleshooting Course Description Students will experience added understanding of configuration issues of disks,
Presented by Henry Ng
Log Format Presented by Henry Ng 1 Types of Logs Content information, alerts, warnings, fatal errors Source applications, systems, drivers, libraries Format text, binary 2 Typical information in Logs Date
Gaia Syslog Messages. Technical Reference Guide. 25 February 2014. Classification: [Protected]
![Gaia Syslog Messages. Technical Reference Guide. 25 February 2014. Classification: [Protected]](/thumbs/25/6278767.jpg "Gaia Syslog Messages. Technical Reference Guide. 25 February 2014. Classification: [Protected]")
Gaia s Technical Reference Guide 25 February 2014 Classification: [Protected] 2014 Check Point Software Technologies Ltd. All rights reserved. This product and related documentation are protected by copyright
RH033 Red Hat Linux Essentials or equivalent experience with Red Hat Linux..
RH131 Red Hat Linux System Administration Course Summary For users of Linux (or UNIX) who want to start building skills in systems administration on Red Hat Linux, to a level where they can attach and
TECHNICAL NOTE. Technical Note P/N 300-999-649 REV 03. EMC NetWorker Simplifying firewall port requirements with NSR tunnel Release 8.
TECHNICAL NOTE EMC NetWorker Simplifying firewall port requirements with NSR tunnel Release 8.0 and later Technical Note P/N 300-999-649 REV 03 February 6, 2014 This technical note describes how to configure
Linux Embedded devices with PicoDebian Martin Noha 28.9.2006
Embedded systems Linux Embedded devices with PicoDebian Martin Noha 28.9.2006 24.03.2005 1 Agenda Why did I look in this stuff? What is an embedded device? Characteristic hardware global requirements for
Network Monitoring & Management Log Management
Network Monitoring & Management Log Management Network Startup Resource Center www.nsrc.org These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)
ENTERPRISE LINUX SYSTEM ADMINISTRATION
ENTERPRISE LINUX SYSTEM ADMINISTRATION The GL250 is an in-depth course that explores installation, configuration and maintenance of Linux systems. The course focuses on issues universal to every workstation
Network Monitoring & Management Log Management
Network Monitoring & Management Log Management These materials are licensed under the Creative Commons Attribution-Noncommercial 3.0 Unported license (http://creativecommons.org/licenses/by-nc/3.0/) Syslog
IP Address: the per-network unique identifier used to find you on a network
Linux Networking What is a network? A collection of devices connected together Can use IPv4, IPv6, other schemes Different devices on a network can talk to each other May be walls to separate different
Error Codes for F-Secure Anti-Virus for Firewalls, Windows 6.20
Error Codes for F-Secure Anti-Virus for Firewalls, Windows 6.20 The two tables described here list the error codes sent by F-Secure Content Scanner Server and F-Secure Anti-Virus for Firewalls. Error codes
PCI 32 BIT Multi I/O Cards Linux Kernel 2.4 Installation Guide
PCI 32 BIT Multi I/O Cards Linux Kernel 2.4 Installation Guide January 6, 2003 INSTALLATION GUIDE FOR PCI SERIAL PORTS...3 INSTALLATION GUIDE FOR PCI PARALLEL PORTS...5 2 Installation Guide for PCI Serial
GLS250 "Enterprise Linux Systems Administration"
GLS250 "Enterprise Linux Systems Administration" Intended for students already comfortable with working in the Unix environment, this in-depth course helps students acquire the variety of skills needed
DHCP Server. Heng Sovannarith [email protected]
DHCP Server Heng Sovannarith [email protected] Introduction Dynamic Host Configuration Protocol (DHCP) automatically assigns IP addresses and other network configuration information to computers
HP A-IMC Firewall Manager
HP A-IMC Firewall Manager Configuration Guide Part number: 5998-2267 Document version: 6PW101-20110805 Legal and notice information Copyright 2011 Hewlett-Packard Development Company, L.P. No part of this
Support Notes for SUSE LINUX Enterprise Server 9 Service Pack 3 for the Intel Itanium 2 Processor Family
Support Notes for SUSE LINUX Enterprise Server 9 Service Pack 3 for the Intel Itanium 2 Processor Family *5991-5301* Part number: 5991-5301 Edition: 3, E0406 Copyright 2006 Hewlett-Packard Development
Building a Penetration Testing Virtual Computer Laboratory
Building a Penetration Testing Virtual Computer Laboratory User Guide 1 A. Table of Contents Collaborative Virtual Computer Laboratory A. Table of Contents... 2 B. Introduction... 3 C. Configure Host Network
Topics. CIT 470: Advanced Network and System Administration. Logging Policies. System Logs. Throwing Away. How to choose a logging policy?
Topics CIT 470: Advanced Network and System Administration Logging 1. System logs 2. Logging policies 3. Finding logs 4. Syslog 5. Syslog servers 6. Log monitoring CIT 470: Advanced Network and System
PSM/SAK Event Log Error Codes
PSM Error Codes PSM/SAK Event Log Error Codes If you experience a problem using Persistent Storage Manager, the following list of event log messages can be used to troubleshoot. Error codes are logged
Changing Password for Ingate Firewalls/SIParators Rickard Nilsson
Changing Password for Ingate Firewalls/SIParators Rickard Nilsson Ingate Firewall/SIParator version: Valid from 5.0.1, released in 5.0.4 Document version: 1.0 Table of Contents Changing Password for Ingate
GL254 - RED HAT ENTERPRISE LINUX SYSTEMS ADMINISTRATION III
QWERTYUIOP{ GL254 - RED HAT ENTERPRISE LINUX SYSTEMS ADMINISTRATION III This GL254 course is designed to follow an identical set of topics as the Red Hat RH254, RH255 RHCE exam prep courses with the added
Linux Syslog Messages in IBM Director
Ever want those pesky little Linux syslog messages (/var/log/messages) to forward to IBM Director? Well, it s not built in, but it s pretty easy to setup. You can forward syslog messages from an IBM Director
Module I-7410 Advanced Linux FS-11 Part1: Virtualization with KVM
Bern University of Applied Sciences Engineering and Information Technology Module I-7410 Advanced Linux FS-11 Part1: Virtualization with KVM By Franz Meyer Version 1.0 February 2011 Virtualization Architecture
Red Condor Syslog Server Configurations
Red Condor Syslog Server Configurations May 2008 2 Red Condor Syslog Server Configurations This application note describes the configuration and setup of a syslog server for use with the Red Condor mail
How To Set Up A Network Map In Linux On A Ubuntu 2.5 (Amd64) On A Raspberry Mobi) On An Ubuntu 3.5.2 (Amd66) On Ubuntu 4.5 On A Windows Box
CSC-NETLAB Packet filtering with Iptables Group Nr Name1 Name2 Name3 Date Instructor s Signature Table of Contents 1 Goals...2 2 Introduction...3 3 Getting started...3 4 Connecting to the virtual hosts...3
End-User troubleshooting guide For Sentinel SuperPro/UltraPro and Sentinel Hardware Keys
End-User troubleshooting guide For Sentinel SuperPro/UltraPro and Sentinel Hardware Keys Preface Welcome to Safenet End User Troubleshooting guide! This guide is intended to assist our Distributors, Customers
Managed Backup Service - Agent for Linux 6.00.2415- Release Notes
Managed Backup Service - Agent for Linux 6.00.2415- Release Notes 1 Managed Backup Service Agent for Linux Version 6.00.2415 Release Notes, 9 th June 2008 1 OVERVIEW This document contains release notes
The System Monitor Handbook. Chris Schlaeger John Tapsell Chris Schlaeger Tobias Koenig
Chris Schlaeger John Tapsell Chris Schlaeger Tobias Koenig 2 Contents 1 Introduction 6 2 Using System Monitor 7 2.1 Getting started........................................ 7 2.2 Process Table.........................................
PARALLELS SERVER BARE METAL 5.0 README
PARALLELS SERVER BARE METAL 5.0 README 1999-2011 Parallels Holdings, Ltd. and its affiliates. All rights reserved. This document provides the first-priority information on the Parallels Server Bare Metal
How To Install The Safenet-Inc.Com Software On A Pc Or Mac Or Macintosh (For A Powerpoint) With A Powerline (For Windows) Or Ipad (For Mac) With The Safetime (For Pc
End-User troubleshooting guide For Sentinel SuperPro/UltraPro and Sentinel Hardware Keys 1 Preface Welcome to Safenet End User Troubleshooting guide! This guide is intended to assist our Distributors,
HP IMC Firewall Manager
HP IMC Firewall Manager Configuration Guide Part number: 5998-2267 Document version: 6PW102-20120420 Legal and notice information Copyright 2012 Hewlett-Packard Development Company, L.P. No part of this
Monitoring Clearswift Gateways with SCOM
Technical Guide Version 01 28/11/2014 Documentation Information File Name Document Author Document Filename Monitoring the gateways with _v1.docx Iván Blesa Monitoring the gateways with _v1.docx Issue
TimeIPS Server. IPS256T Virtual Machine. Installation Guide
TimeIPS Server IPS256T Virtual Machine Installation Guide TimeIPS License Notification The terms and conditions applicable to the license of the TimeIPS software, sale of TimeIPS hardware and the provision
Security Correlation Server Quick Installation Guide
orrelog Security Correlation Server Quick Installation Guide This guide provides brief information on how to install the CorreLog Server system on a Microsoft Windows platform. This information can also
FINFISHER: FinFly ISP 2.0 Infrastructure Product Training
1 FINFISHER: FinFly ISP 2.0 Infrastructure Product Training Table of content 2 1. Introduction 2. The infrastructure - ADMF Client and Infection GUI - Administration: ADMF - iproxy: NDP01/02 - Radius Probe:
System Administration
Performance Monitoring For a server, it is crucial to monitor the health of the machine You need not only real time data collection and presentation but offline statistical analysis as well Characteristics
Computer Setup (F10) Utility Guide Evo Desktop Family Evo Workstation Family
b Computer Setup (F10) Utility Guide Evo Desktop Family Evo Workstation Family Document Part Number: 215867-004 May 2002 This guide provides instructions on how to use Computer Setup. This tool is used
Network Monitoring & Management Log Management
Network Monitoring & Management Log Management Network Startup Resource Center www.nsrc.org These materials are licensed under the Creative Commons Attribution-NonCommercial 4.0 International license (http://creativecommons.org/licenses/by-nc/4.0/)
DC Agent Troubleshooting
DC Agent Troubleshooting Topic 50320 DC Agent Troubleshooting Web Security Solutions v7.7.x, 7.8.x 27-Mar-2013 This collection includes the following articles to help you troubleshoot DC Agent installation
Configuring System Message Logging
CHAPTER 25 This chapter describes how to configure system message logging on the Catalyst 2960 switch. Note For complete syntax and usage information for the commands used in this chapter, see the Cisco
DeployStudio Server Quick Install
DeployStudio Server Quick Install v1.7.0 The DeployStudio Team [email protected] Requirements OS X 10.7.5 to 10.11.1 DeployStudioServer_v1.7.x.pkg and later NetBoot based deployment 100 Mb/s switched
Basic System. Vyatta System. REFERENCE GUIDE Using the CLI Working with Configuration System Management User Management Logging VYATTA, INC.
VYATTA, INC. Vyatta System Basic System REFERENCE GUIDE Using the CLI Working with Configuration System Management User Management Logging Vyatta Suite 200 1301 Shoreway Road Belmont, CA 94002 vyatta.com
Server Management Agent for Linux User s Guide. Server Management 2.0 and Higher
Server Management Agent for Linux User s Guide Server Management 2.0 and Higher March 2008 . unisys imagine it. done. Server Management Agent for Linux User s Guide Server Management 2.0 and Higher March
Linux Networking Basics
Linux Networking Basics Naveen.M.K, Protocol Engineering & Technology Unit, Electrical Engineering Department, Indian Institute of Science, Bangalore - 12. Outline Basic linux networking commands Servers
Customer Tips. Configuring Color Access on the WorkCentre 7328/7335/7345 using Windows Active Directory. for the user. Overview
Xerox Multifunction Devices Customer Tips February 13, 2008 This document applies to the stated Xerox products. It is assumed that your device is equipped with the appropriate option(s) to support the
F-Secure Internet Gatekeeper Virtual Appliance
F-Secure Internet Gatekeeper Virtual Appliance F-Secure Internet Gatekeeper Virtual Appliance TOC 2 Contents Chapter 1: Welcome to F-Secure Internet Gatekeeper Virtual Appliance.3 Chapter 2: Deployment...4
ALTIRIS Deployment Solution 6.8 PXE Overview
ALTIRIS Deployment Solution 6.8 PXE Overview Notice Altiris AAA Document 2006 Altiris, Inc. All rights reserved. Document Date: October 3, 2006 Altiris, Inc. is a pioneer of IT lifecycle management software
SysPatrol - Server Security Monitor
SysPatrol Server Security Monitor User Manual Version 2.2 Sep 2013 www.flexense.com www.syspatrol.com 1 Product Overview SysPatrol is a server security monitoring solution allowing one to monitor one or
Connecting to the Firewall Services Module and Managing the Configuration
CHAPTER 3 Connecting to the Firewall Services Module and This chapter describes how to access the command-line interface and work with the configuration. This chapter includes the following sections: Connecting
Linux for UNIX Administrators
A fast paced combination of "Enterprise Linux Systems Administration", and "Enterprise Linux Networking Services. Particular focus is given to translating Solaris and HP-UX skills to Linux. Audience: Experienced
unisys Server Management Agent for Linux User s Guide imagine it. done. Server Management 2.2 and Higher October 2009 3839 6420 006
unisys imagine it. done. Server Management Agent for Linux User s Guide Server Management 2.2 and Higher October 2009 3839 6420 006 NO WARRANTIES OF ANY NATURE ARE EXTENDED BY THIS DOCUMENT. Any product
Syslog & xinetd. Stephen Pilon
Syslog & xinetd Stephen Pilon What create log files? Logging Policies Throw away all data immediately Reset log files at periodic intervals Rotate log files, keeping data for a fixed time Compress and
Logging with syslog-ng, Part One
Logging with syslog-ng, Part One By Line Forrest Hoffman Used properly, system logs are like the pulse of a system. A log can often explain sources of configuration problems or foretell of impending hardware
UPSMON PRO Linux --- User Manual
UPSMON PRO Linux --- User Manual Version : 2.1 *Attention : root authority is necessary to execute at Linux here AA. UPSMON PRO Install 2 BB. UPSMON PRO Start 3 CC. UPSMON PRO Status 6 DD. UPSMON PRO Config
USB 2.0 Flash Drive User Manual
USB 2.0 Flash Drive User Manual 1 INDEX Table of Contents Page 1. IMPORTANT NOTICES...3 2. PRODUCT INTRODUCTION...4 3. PRODUCT FEATURES...5 4. DRIVER INSTALLATION GUIDE...6 4.1 WINDOWS 98 / 98 SE... 6
Red Hat System Administration 1(RH124) is Designed for IT Professionals who are new to Linux.
Red Hat Enterprise Linux 7- RH124 Red Hat System Administration I Red Hat System Administration 1(RH124) is Designed for IT Professionals who are new to Linux. This course will actively engage students
Professional Xen Visualization
Professional Xen Visualization William von Hagen WILEY Wiley Publishing, Inc. Acknowledgments Introduction ix xix Chapter 1: Overview of Virtualization : 1 What Is Virtualization? 2 Application Virtualization
Important. Please read this User s Manual carefully to familiarize yourself with safe and effective usage.
Important Please read this User s Manual carefully to familiarize yourself with safe and effective usage. About This Manual This manual describes how to install and configure RadiNET Pro Gateway and RadiCS
NI Real-Time Hypervisor for Windows
QUICK START GUIDE NI Real-Time Hypervisor Version 2.1 The NI Real-Time Hypervisor provides a platform you can use to develop and run LabVIEW and LabVIEW Real-Time applications simultaneously on a single
- The PIX OS Command-Line Interface -
1 PIX OS Versions - The PIX OS Command-Line Interface - The operating system for Cisco PIX/ASA firewalls is known as the PIX OS. Because the PIX product line was acquired and not originally developed by
SSSD. Client side identity management. LinuxAlt 2012 Jakub Hrozek 3. listopadu 2012
Client side identity management LinuxAlt 2012 Jakub Hrozek 3. listopadu 2012 Section 1 Centralized user databases Centralized user databases User accounts in a large environment it is not practical to
Red Hat Linux Networking
The information presented should act as a guide to Red Hat Linux networking. It is intended to be accompanied with training and self study. To access most of these items you will need to have root access,
Quick Start for Network Agent. 5-Step Quick Start. What is Network Agent?
What is Network Agent? The Websense Network Agent software component uses sniffer technology to monitor all of the internet traffic on the network machines that you assign to it. Network Agent filters
VIA Fedora Linux Core 8 (x86&x86_64) VT8237R/VT8237A/VT8237S/VT8251/CX700/VX800 V-RAID V3.10 Driver Installation Guide
VIA Fedora Linux Core 8 (x86&x86_64) VT8237R/VT8237A/VT8237S/VT8251/CX700/VX800 V-RAID V3.10 Driver Installation Guide 1. Summary Version 0.8, December 03, 2007 Copyright 2003~2007 VIA Technologies, INC
Auditing in the VNX Control Station P/N 300-011-802 REV A01 February, 2011
EMC VNX Version 7.0 P/N 300-011-802 REV A01 February, 2011 This technical note contains information on these topics: Executive summary... 2 Introduction... 2 Auditing and audit logs... 3 Audit commands...
vsphere Single Host Management
vsphere 5.5 ESXi 5.5 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for more recent editions of
Knut Omang Ifi/Oracle 19 Oct, 2015
Software and hardware support for Network Virtualization Knut Omang Ifi/Oracle 19 Oct, 2015 Motivation Goal: Introduction to challenges in providing fast networking to virtual machines Prerequisites: What
Network Licensing. White Paper 0-15Apr014ks(WP02_Network) Network Licensing with the CRYPTO-BOX. White Paper
WP2 Subject: with the CRYPTO-BOX Version: Smarx OS PPK 5.90 and higher 0-15Apr014ks(WP02_Network).odt Last Update: 28 April 2014 Target Operating Systems: Windows 8/7/Vista (32 & 64 bit), XP, Linux, OS
Load Balancing Clearswift Secure Web Gateway
Load Balancing Clearswift Secure Web Gateway Deployment Guide rev. 1.1.8 Copyright 2002 2016 Loadbalancer.org, Inc. 1 Table of Contents About this Guide...3 Loadbalancer.org Appliances Supported...3 Loadbalancer.org
Exam: 070-215 QUESTION 1 QUESTION 2 QUESTION 3 QUESTION 4
Exam: 070-215 QUESTION 1 You want to provide complete redundancy for all data stored on your hardware RAID-5 disk array. You install a second hardware RAID-5 disk array. You want to create a mirror of
Plexxi Control Installation Guide Release 2.1.0
Plexxi Control Installation Guide Release 2.1.0 702-20002-10 Rev 1.2 February 19, 2015 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Notices The information
GL-250: Red Hat Linux Systems Administration. Course Outline. Course Length: 5 days
GL-250: Red Hat Linux Systems Administration Course Length: 5 days Course Description: The GL250 is an in-depth course that explores installation, configuration and maintenance of Linux systems. The course
Installing, upgrading and troubleshooting your CLIO system under the Windows environment.
Installing, upgrading and troubleshooting your CLIO system under the Windows environment. Audiomatica Srl Rev. 1.1. June 2001. Contents 1 What does this document cover?... 1 2 Windows compatibility...
avast! for linux technical documentation
avast! for linux technical documentation Martin Tůma, [email protected] June 4, 2014 Contents 1 Overview 1 2 Installation 2 3 Operation 3 4 Licensing 4 5 Virus definitions updates 4 6 AMaViS integration 4
Enterprise Cloud VM Image Import User Guide. Version 1.0
Enterprise Cloud VM Image Import User Guide Version 1.0 Version History Issue Date Comments 1.0 2013/03/20 Initial version i Introduction 1) Purpose of this document: The purpose of this document is to
20 Command Line Tools to Monitor Linux Performance
20 Command Line Tools to Monitor Linux Performance 20 Command Line Tools to Monitor Linux Performance It s really very tough job for every System or Network administrator to monitor and debug Linux System
ICS 351: Today's plan. IP addresses Network Address Translation Dynamic Host Configuration Protocol Small Office / Home Office configuration
ICS 351: Today's plan IP addresses Network Address Translation Dynamic Host Configuration Protocol Small Office / Home Office configuration IP address exhaustion IPv4 addresses are 32 bits long so there
DHCP Failover. Necessary for a secure and stable network. DHCP Failover White Paper Page 1
DHCP Failover Necessary for a secure and stable network DHCP Failover White Paper Page 1 Table of Contents 1. Introduction... 3 2. Basic DHCP Redundancy... 3 3. VitalQIP Failover Solution... 5 4. VitalQIP
Eventlog to Syslog v4.5 Release 4.5 Last revised September 29, 2013
Eventlog to Syslog v4.5 Release 4.5 Last revised September 29, 2013 This product includes software developed by Purdue University. The Eventlog to Syslog utility is a windows service originally created
Dynamic Host Configuration Protocol (DHCP) 02 NAT and DHCP Tópicos Avançados de Redes
Dynamic Host Configuration Protocol (DHCP) 1 1 Dynamic Assignment of IP addresses Dynamic assignment of IP addresses is desirable for several reasons: IP addresses are assigned on-demand Avoid manual IP
HARFORD COMMUNITY COLLEGE 401 Thomas Run Road Bel Air, MD 21015 Course Outline CIS 110 - INTRODUCTION TO UNIX
HARFORD COMMUNITY COLLEGE 401 Thomas Run Road Bel Air, MD 21015 Course Outline CIS 110 - INTRODUCTION TO UNIX Course Description: This is an introductory course designed for users of UNIX. It is taught
Lab 5.5 Configuring Logging
Lab 5.5 Configuring Logging Learning Objectives Configure a router to log to a Syslog server Use Kiwi Syslog Daemon as a Syslog server Configure local buffering on a router Topology Diagram Scenario In
Computer Security DD2395 http://www.csc.kth.se/utbildning/kth/kurser/dd2395/dasakh10/
Computer Security DD2395 http://www.csc.kth.se/utbildning/kth/kurser/dd2395/dasakh10/ Fall 2010 Sonja Buchegger [email protected] Lecture 13, Dec. 6, 2010 Auditing Security Audit an independent review and examination
NetSpective Logon Agent Guide for NetAuditor
NetSpective Logon Agent Guide for NetAuditor The NetSpective Logon Agent The NetSpective Logon Agent is a simple application that runs on client machines on your network to inform NetSpective (and/or NetAuditor)
Agenda. Context. System Power Management Issues. Power Capping Overview. Power capping participants. Recommendations
Power Capping Linux Agenda Context System Power Management Issues Power Capping Overview Power capping participants Recommendations Introduction of Linux Power Capping Framework 2 Power Hungry World Worldwide,
Virtualised MikroTik
Virtualised MikroTik MikroTik in a Virtualised Hardware Environment Speaker: Tom Smyth CTO Wireless Connect Ltd. Event: MUM Krackow Feb 2008 http://wirelessconnect.eu/ Copyright 2008 1 Objectives Understand
Using ESXi with PowerChute Business Edition
Using ESXi with PowerChute Business Edition This help covers the following topics: Installing vma for an ESXi Host Server Configuring and Running ESXi 1 Installing vma for an ESXi Host Server vsphere Management
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice.
Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the software, please review the readme files,
Shutting down / Rebooting Small Business Server 2003 Version 1.00
Shutting down / Rebooting Small Business Server 2003 Version 1.00 Need to Know TM It may be necessary at some stage of the life of Small Business Server 2003 that it be shutdown or rebooted. In many cases
COURCE TITLE DURATION LPI-202 Advanced Linux Professional Institute 40 H.
COURCE TITLE DURATION LPI-202 Advanced Linux Professional Institute 40 H. IMPLEMENTING A WEB SERVER Apache Architecture Installing PHP Apache Configuration Files httpd.conf Server Settings httpd.conf Main
IMM2 Configurations User's Guide Version 1.0 (Jan 2013)
Integrated Management Module II IMM2 Configurations User's Guide Version 1.0 (Jan 2013) Table of Contents Table of Contents... I 1 Introduction... 1 1.1 Definitions... 1 1.2 Related Documents... 1 2 Help
Virtual Appliance for VMware Server. Getting Started Guide. Revision 2.0.2. Warning and Disclaimer
Virtual Appliance for VMware Server Getting Started Guide Revision 2.0.2 Warning and Disclaimer This document is designed to provide information about the configuration and installation of the CensorNet
Using SNMP with Content Gateway (not V-Series)
Using SNMP with Content Gateway (not V-Series) Topic 60035 / Updated: 9-May-2011 Applies To: Websense Web Security Gateway 7.6.x Websense Web Security Gateway Anywhere 7.6.x Websense Content Gateway 7.6.x
Oracle EXAM - 1Z0-102. Oracle Weblogic Server 11g: System Administration I. Buy Full Product. http://www.examskey.com/1z0-102.html
Oracle EXAM - 1Z0-102 Oracle Weblogic Server 11g: System Administration I Buy Full Product http://www.examskey.com/1z0-102.html Examskey Oracle 1Z0-102 exam demo product is here for you to test the quality