NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S

Size: px
Start display at page:

Download "NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S"

Transcription

1 AFAQ AFNOR Certification LABORATOIRE CENTRAL Organisme certificateur DES INDUSTRIES ELECTRIQUES 11 Avenue Francis de Pressensé DIRECTION DE LA CERTIFICATION Saint-Denis La plaine Cedex Organisme mandaté 33, Avenue du Général Leclerc FONTENAY-AUX-ROSES NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S CE RTIFICATION RULE S In case of doubt or dispute, the original language text only is valid AFNOR CERTIFICATION Identification N : NF 003 Réf. RHa/MDy Rév. n 2 Février 2005 Application date : Mai 2005

2 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules CONTENTS ARTICLES Pages 1 Purpose and scope Definitions NF Mark: Affixing the mark Supervision to be performed by the requestor or the applicant Granting of the right to use the NF Mark NF Mark management bodies Decision following a request for granting the right to use the NF Mark Monitoring of the conformity of products accepted for the NF Mark Decision within the framework of the monitoring Modification of products and transfer of production premises Financial procedure Approval - Revision...11 TITLES Appendices 0 Summary list of reference documents 1A Applicable standards and specifications 1B Scope 1C Definitions 2A Affixing the Mark - References to the Mark 2B Marking procedures 2C Essential certified characteristics 3A Composition of the Particular Advisory Committee 3B Composition of the Panel Committee 3C List of Third party laboratories 3D/E/F Acceptance of a manufacturer's laboratory and procedures for the tests 4 Granting of the right to use the NF Mark 5 Quality requirements of the production of the requestor / applicant 6 Surveillance procedure with relation to compliance of products holding the NF Mark 7 Financial procedures Application documents: The application documents of the Special rules and their Appendices are to be turned over to the requestor and to the applicants by the LCIE (Central Laboratory for the Electrical Industry). The application documents are managed by the LCIE. 2/11

3 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules 1 - PURPOSE AND SCOPE These Regulations apply the General Regulations in force for the NF Mark which the requestors and applicants of the right to use commit themselves to respect. This application of the NF Mark is intended to attest that the products which it covers: - have characteristics in compliance with the reference documents listed in Appendix 1A, - come from a production, the quality of which is controlled according to the provisions specified in Appendix 5. Among the regulations that apply to products in this rule, the Mark covers the requirements of article 2 of modified 73/23/CEE Tension low Directive. 2 - DEFINITIONS The definitions necessary for understanding these Special Regulations and their Appendices are given in the Appendix 1C. 3 - NF MARK: AFFIXING THE MARK - REFERENCES TO THE MARK Any product that is certified must carry the NF Mark in compliance with Appendices 2 that specify: - in 2A and 2B: the procedures for reproducing the logo and the use of the NF Mark which must be respected as soon as the right to use is granted, - in 2C: the essential certified characteristics (according to Decree no ). Upon request of the AFNOR CERTIFICATION or of the LCIE, the applicant must communicate any document referring to the NF Mark. The marketing of not certified products making reference to certification or to the mark on the products, miscellaneous labels and packing is strictly prohibited. It is allowed, except in the setting of the Mark NF assigned at batch control, that the commercial supports such as catalogues, Internet sites, etc. can indicate that a "instruction of a request for certification is in progress". This mention is not possible that so indeed, the process of certification is in progress and was not stopped. The mention "certification in progress" is strictly prohibited. 4 - SUPERVISION TO BE PERFORMED BY THE REQUESTOR OR THE APPLICANT The requestor or the applicant of the right to use the NF Mark must take measures in the scope of Quality Assurance to make sure that the products which benefit from the NF Mark are permanently manufactured in compliance with the Special Regulations. 3/11

4 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules Appendix 5 specifies the minimal requirements with which the requestor or applicant must comply. 5 - GRANTING OF THE RIGHT TO USE THE NF MARK The request must be presented in compliance with the conditions and forms given in Appendix 4. Upon receipt of the request, the detailed procedure in Appendix 4 begins; in the general case, it includes: - examination of the file, - visit to the production unit, - tests. The procedure can be lightened under the conditions specified in Appendix 4. To submit an acceptable file, the requestor must fulfil the conditions specified in Appendix 5, with relation to the product and the production unit for the product at the moment of the request. It must commit itself to comply with the same conditions during the whole duration of the use of the NF Mark. 6 - NF MARK MANAGEMENT BODIES This Chapter presents the various participants in the management of the NF Mark: 6.1 AFNOR CERTIFICATION The NF mark is the exclusive property of AFNOR. AFNOR conceded to AFNOR CERTIFICATION a license of total exploitation of the NF mark. To this title AFNOR CERTIFICATION assumes the responsibility of the application of the present regulation and all decisions taken in the setting of this one. 6.2 LCIE LABORATOIRE CENTRAL DES INDUSTRIES ELECTRIQUES (LCIE) Direction of Certification B.P. n 8-33 avenue du Général Leclerc, F Fontenay-aux-Roses Cedex Fax: 33 (1) /11

5 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules Functions performed by the LCIE The LCIE mandatory by AFNOR CERTIFICATION, is responsible for all the management operations which are entrusted to it. It implements the certification procedures within the framework of its mandate and of the international recognition agreements in which it participates. In particular, it is responsible for: - preparing the Regulations defining the procedures for assessing and monitoring compliance with the standards, in particular, the requirements concerning the manufacturer's Quality Assurance of the products, - the examination of the request of the right to use the NF Mark, of the notification of test result delivery, of CB certificate, of the acceptance of manufacturer s laboratory, - relations with the manufacturers, particularly for checking the correct use of the NF Mark, - Secretariat of the Particular Advisory Committee, preparation and follow-up of meetings, - inspections Inspections The inspections in the factory and the checks in the sales circuits are performed by the LCIE or under its responsibility, within the framework of international agreements Laboratories Third party laboratories or requestors' laboratories The tests for granting the NF Mark are carried out according to the instructions from the LCIE, either in the laboratory(ies) authorised by the manufacturer, under the conditions defined in Appendix 3D, 3E, 3F, or in the third party laboratory(ies), mentioned in Appendix 3C. The check tests, carried out on the products having received the NF Mark are performed according to the instructions from the LCIE in a third party laboratory. The tests linked to the modification of acceptable product can be made by the Technical Delegate of DTM Marks in accordance with LCIE/DTM document. This function is strictly reserved to a person appointed by LCIE carrying out a responsibility in a authorized Laboratory of the holder Laboratories associated with international certification bodies, members of the IECEE system and/or the CENELEC Certification Agreement The IECEE method for accepting the results of tests according to the electrical equipment safety standards (OC method) (publications IECEE 01 and 02) applies to the products listed in the Gazette published by the IECEE. Whenever applicable, the CENELEC Certification Agreement (CCA according to Memorandum no. 13) and its additions, concerns the products mentioned in Appendix 1B with complementary tests if necessary for the issuance of the NF Mark. 5/11

6 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules 6.3. Particular Advisory Committee The Particular Advisory Committee is a consultative body Attributions The Particular Advisory Committee is responsible for contributing to the follow-up of the certification activities and for issuing judgements concerning: - the Regulations and their revisions, - the decisions taken in application of the Regulations, - the files posing problems of interpretation or being contested, - the advertising and promotional action plans concerning its activity, - the choice of laboratories, - the proposals and implementation of the international recognition agreements. The Particular Advisory Committee issues opinions that are the expression of a consensus; in case of disagreement, the Chairman can request a vote to point up the prevailing opinion. Any experts who might be called in to assist the Committee take no part in the voting Composition The detailed composition of the Particular Advisory Committee is given in Appendix 3A. The nominative composition of the committee is approved by the AFNOR CERTIFICATION Director General upon nomination by the mandated Body. The duration of the mandate is 3 years. It may be renewed by tacit agreement. The Particular Advisory Committee Chairman is also appointed by the AFNOR CERTIFICATION Director General under the same conditions. Every member is informed to the decision by LCIE. The exercise of the functions of a Particular Advisory Committee member is strictly personnel. The Particular Advisory Committee members can receive no remuneration for the function and/or missions that are entrusted to them Panel of Committee During the intersessions, the Particular Advisory Committee may entrust the current work to an Panel Committee the members of which it will have designated by name, and the mission of which it will have specified. 6/11

7 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules The Panel Committee's composition is given, as the case may be, in Appendix 3B. 6.4 Confidentiality - Protection of documents All these participants in the management of the NF Mark are held to professional secret. The members must ensure that the documents entrusted to them are protected against unauthorised duplication and distribution. 7 - DECISION FOLLOWING A REQUEST FOR GRANTING THE RIGHT TO USE THE NF MARK 7.1 Nature of decisions The investigation of a file results in one of the following decisions, notified by the LCIE: a) granting the right to use the NF Mark, b) refusing the right to use the NF Mark. 7.2 Taking effect The decisions are effective as soon as they are communicated to the requestors. 7.3 Validity of the right to use the NF Mark The validity of the right to use the NF Mark automatically stops in the following cases: - the standard(s) to which the products are subject, are no longer applicable, - the application of the NF Mark is eliminated under the conditions set in Article 17 of the General Rules of the NF Mark. 7.4 Misuse of the NF Mark Misuse of the NF Mark is the subject of Paragraph 6 of Appendix 2A of the Regulations. 7.5 Contesting a decision - Recourse The requestor/applicant can contest a decision taken in compliance with Article 12 of the General Rules of the NF Mark. 7/11

8 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules 8 MONITORING OF CONFORMITY OF PRODUCTS ACCEPTED FOR THE NF MARK 8.1 Surveillance performed by the LCIE The LCIE carries out surveillance as soon as the right to use the NF Mark is granted. This surveillance consists of inspection visits to the production unit and tests on the product. The surveillance visits' dates are, to the degree possible, planned in accordance with the wishes of the parties in presence and upon request from the LCIE. Appendix 6 defines the procedures for this surveillance depending upon: - the level of the quality organisation of the applicant of the right to use the NF Mark, - decisions taken concerning the certified product. 8.2 Checks performed by the applicant The requestor or applicant of the NF Mark must perform regular quality control operations on the production of products covered by the use of the NF Mark, in compliance with the provisions set in Appendix 5 of these Special Regulations. 8.3 Inspection in the sales circuits These inspections, in particular, entail testing one of the products carrying the NF Mark, sampled at a sales point, and examining the trading documentation. 8.4 Inspection as part of the investigation of complaints In case of dispute with the users, the inspections may include samplings or tests at the location where the certified products are used (in this case, the applicant is invited to be represented to assist at the samplings and at the tests). 8.5 Examination of the results The inspections or checks carried out are written up in inspection reports. Only nonsatisfactory results are presented to the Particular Advisory Committee and they are presented anonymously. The Particular Advisory Committee can propose additional investigation and, as the case may be, may request to hear the applicant. 8/11

9 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules 9 - DECISION WITHIN THE FRAMEWORK OF THE SURVEILLANCE Based on the results of inspection visits at the production unit and testing, the LCIE communicates one of the following decisions in compliance with Article 11 of the General Rules of the NF Mark: a) Continuation of the right to use, b) Conditional renewal of the right to use the NF Mark with: b1) Transmission of observations or a warning, b2) Increase in the frequency of inspections and additional samplings, c) Suspension of the right to use the NF Mark, d) Withdrawal of the right to use the NF Mark. In the case of the decisions b2, c and d, the costs of additional checks, decided by the LCIE, are in charge of applicant, whatever the results, as well as the costs of testing the products sampled, the testing results of which are deficient. In the case of the decisions C and D, information is transmitted to AFNOR CERTIFICATION and the DGCCRF. The decision becomes effective on the date when it is communicated to the requestor or applicant. Furthermore, in the case of a serious infringement of the regulations, and as a protective measure, the LCIE can, after definitely noting the infringement, and in liaison with AFNOR CERTIFICATION, take any decision of suspension or withdrawal of the right to use the NF Mark for all products having received it, including those which may be covered by other applications. Any decisions taken in this way are reported to the Particular Advisory Committee. The applicant can contest the decision taken in compliance with Article 12 of the General Rules of the NF Mark MODIFICATION OF PRODUCTS AND TRANSFER OF PRODUCTION PREMISES Any modification of the conditions under which the NF Mark was granted must be communicated in writing by the applicant in compliance with Appendix Modification concerning the applicant In case of merger, winding up or take over of the applicant, all the rights to use the NF Mark which it might hold, automatically stop. The applicant must communicate to the NF Mark Secretariat, in writing, any legal modification concerning its company or any change in its official name. It is up to the LCIE to examine the procedures for a new granting of the right to use the NF Mark by the new applicant, or the maintaining in force of that right to use the NF Mark. 9/11

10 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules However, in certain cases and after examination by the LCIE, the initial elements of a file concerning the right to use the Mark may be taken into account when a modification concerns the applicant, subject to a clear definition of the conditions of that modification require protective measures so as not to interrupt production under the NF Mark Modification concerning the production unit Any transfer (total or partial) of the production unit of a certified product to another production site, unknown to the NF Mark for this type of product, entails the immediate stopping of the use of the NF Mark by the applicant on the product(s) transferred. The applicant must declare such transfer in writing to the NF Mark Secretariat. The Application Manager will organise an inspection visit to the new production site and, as the case may be, carry out appropriate testing Modification concerning the quality organisation of the production unit The applicant must declare in writing to the NF Mark Secretariat any modification to its quality organisation that might affect compliance of production to the demands of the Special Regulations and of their Appendices. In particular, this covers any modification concerning the applicant s installations and Quality Plans In particular, it must declare all modification of certification of its Quality Assurance System. Any temporary stopping of internal quality control of a certified product entails an immediate stopping of its marking by the applicant. The LCIE then declares a decision to suspend the right to use the NF Mark Modification concerning the certified product Any modification of a certified product must be the subject of a written declaration to the NF Mark Secretariat that initiates the detailed procedure in Appendix 6. Modifications which do not bring the product's intrinsic compliance into question, can be directly validated by the DTM (Technical Delegate of the NF Mark). The DTM must so notify the Application Manager. The DTM's functions are described in a document supplied by the LCIE when a request for empowerment of a DTM is submitted by a manufacturer. Any definitive stopping of production of a certified product or any abandonment of a right to use the NF Mark must be declared in writing to the NF Mark Secretariat with the information concerning the time necessary for the depletion of the inventory of the marked products. At the expiration of this time, the LCIE declares the suspension or withdrawal of the right to use the NF Mark. 10/11

11 NF-ELECTRICAL CONDUCTORS AND CABLES Certification Rules 11 - FINANCIAL PROCEDURE The financial procedure of the NF Mark that defines the amount of costs related to certification and describes the practical methods for collecting these costs is the subject of Appendix APPROVAL - REVISION These Special Regulations (and their Appendices) were approved by the AFNOR CERTIFICATION Director General on 2005, 16 May. They can be revised by AFNOR CERTIFICATION or by the LCIE after consulting the Particular Advisory Committee. Any such revision must be submitted for the approval of the AFNOR CERTIFICATION Director General. 11/11

12 AFAQ AFNOR Certification LABORATOIRE CENTRAL Organisme certificateur DES INDUSTRIES ELECTRIQUES 11 Avenue Francis de Pressensé DIRECTION DE LA CERTIFICATION Saint-Denis La plaine Cedex Organisme mandaté 33, Avenue du Général Leclerc FONTENAY-AUX-ROSES NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S CE RTIFICATION RULE S APPENDIX 0 SUMMARY LIST OF REFERENCE DOCUMENTS In case of doubt or dispute, the original language text only is valid AFNOR CERTIFICATION Identification N : NF 003 Réf. RHa/MDy Rév. n 2 Février 2005 Application date : Mai 2005

13 NF-ELECTRICAL CONDUCTORS AND CABLES Appendix 0 Designation Revision no. General Rules of the NF Mark Graphic Chart on the NF Mark Sent upon simple request to AFNOR CERTIFICATION NF003 Rules 2 Appendix 0 Summary list of reference documents 2 Appendix 1A Applicable standards and specifications 2 Appendix 1B Scope of application 2 Appendix 1C Definitions - Glossary 2 Appendix 2A Affixing the Mark References to the Mark 2 Appendix 2B Marking procedures 2 Appendix 2C Essential certified characteristics No used Appendix 3A Composition of the Particular Advisory Committee(s) 2 Appendix 3B Composition of the Panel of Committee No used Appendix 3C List of Third Party Laboratories 2 Appendix 3D Appendix 3E Appendix 3F Acceptance of a manufacturer's laboratory and procedures for the tests Acceptance of a Witnessed Manufacturer s Testing and procedures for the tests Acceptance of a Testing at Manufacturer s Premises and procedures for the tests No available No available No available Appendix 4 Granting of the right to use the NF Mark 2 Appendix 5 Appendix 6 Quality requirements of the production of the requestor/applicant Surveillance procedure with relation to compliance of products holding the NF Mark 2 2 Appendix 7 Financial procedures 2 The Appendices are an integral part of the NF Special regulations NF ELECTRICAL CONDUCTORS AND CABLES. 2/2

14 AFAQ AFNOR Certification LABORATOIRE CENTRAL Organisme certificateur DES INDUSTRIES ELECTRIQUES 11 Avenue Francis de Pressensé DIRECTION DE LA CERTIFICATION Saint-Denis La plaine Cedex Organisme mandaté 33, Avenue du Général Leclerc FONTENAY-AUX-ROSES NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S CE RTIFICATION RULE S APPENDIX 1A APPLICABLE STANDARDS AND SPECIFICATIONS AFNOR CERTIFICATION Identification N : NF 003 Ref. RHa/MDy Review N 2 : Février 2005 Date of application: Mai 2005

15 NF ELECTRICAL CONDUCTORS AND CABLES Appendix n 1A Rights to use the NF Mark are only granted for products or ranges of products made by an identified manufacturer in one or more declared production units, which are in compliance with one or more standards and/or specifications applicable to the said product(s) or range(s) of products. Furthermore, the LCIE reserves the right to make use of existing OSM decisions whenever suitable, particular in the context of CCA agreements. These same principles will also apply for CTL decisions established in the context of the IECEE (CB scheme) A list of decisions is available from the LCIE on request. APPLICABLE STANDARDS AND SPECIFICATIONS NF C (HD 22.1 S4) NFC (HD 22.2 S3) NF C (HD 22.3 S3) NF C (HD 22.4 S3) NF C (HD 22.6 S2) NF C (HD 22.7 S2) NF C (HD 22.8 S2) NF C (HD 22.9 S2) NF C (HD S1) NF C (HD S1) NF C (HD S1) NF C (HD S1) Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone rubber insulated cables. Rubber insulated cables or rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 6: Arc welding cables Rubber insulated cables of rated voltages up to and including 450/750 V - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 C. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyuréthane sheathed flexible cable. Rubber insulated cables of rated voltages up to and including 450/750V - Part 11: EVA cords and flexible cables. Rubber insulated cables of rated voltages up to and including 450/750 V. Part 12: Heat resistant EPR cords and flexible cables. Rubber insulated cables of rated voltages up to and including 450/750 V. Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases. 2/6

16 NF ELECTRICAL CONDUCTORS AND CABLES Appendix n 1A NF C (HD S2) NF C (HD S1) NF C (HD S1) NF C NF C NF C NF C NF C (HD 21.1 S4) NF C (HD 21.2 S3) NF C (HD 21.3 S3) NF C (HD 21.4 S2) NF C (HD 21.5 S3) NF C (HD 21.7 S2) HD 21.8 S2 NF C (HD 21.9 S2) Rubber insulated cables of rated voltages up to and including 450/750 V - Part 14: Cords for applications requiring high flexibility. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber. Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables. Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables. Insulated cables and flexible cords for installations - Rubber insulated cables of rated voltages up to and including 450/750 V - Series of the recognised national type. Halogen-free non-sheathed cables, with improved characteristics in case of fire, type C1 or C2, with thermoplastic or cross-linked synthetic insulation of rated voltages up to and including 450/750 V. Insulated cables and flexible cords for installations. Halogen - free flexible cables with improved characteristics in the case of fire, type C1, with cross-linked synthetic insulation and with extruded synthetic sheath of rated voltage up to and including 450/750 V. Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements. Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods. Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 4: Sheathed cables for fixed wiring. Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5: Flexible cables Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90 C. Polyvinyl chloride insulated conductors and cables, for a maximum voltage rating of 450/750 V. Part 8: Non-sheathed single-core conductors intended for decorative chains. Polyvinyl chloride insulated cables of rated voltages up of and including 450/750 V. Part 9: Single core non-sheathed cables for installation at low temperature. NF C (HD S1) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads 3/6

17 NF ELECTRICAL CONDUCTORS AND CABLES Appendix n 1A NF C (HD S1) NF C (HD S1) NF C (HD S1) NF C NF C NF C NF C NF C NF C NF C NF C NF C NF C NF C NF EN C NF C NF EN NF C NF C Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaries. Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords). Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 13: Oil resistant PVC sheathed cables with two or more conductors. Flat polyvinyl chloride sheathed flexible cables. Insulated cables and flexible cords for installations. PVC insulated flexible cords, textile braided for lighting fittings. Series of the national type: Category 2 (E). Insulated cables and flexible cords for installations - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Non-sheathed cable for decorative chains - Harmonized series and series of national type. Insulated cables and flexible cords for installations - Polyvinyl chloride insulated and polyvinyl chloride sheathed flexible cables for internal wiring of machine-tools and for use in industrial installations - Series of the recognised national type. Insulated cables and flexible cords for installations. Polyvinyl chloride insulated cables covered with a light polyvinyl chloride sheath of rated voltage V. Series of the national type. Insulated cables and flexible cords for installations. PVC insulated single-core non sheathed cables with rigid stranded aluminium conductor of rated voltages 450/750 V. Series of the national type: Category 2. Insulated cables and flexible cords for installations. PVC insulated cables for very low voltage circuit. Insulated cables and flexible cords for installations. Internal polyvinyl chloride insulated wires. Insulated cables and flexible cords for installations. Flat, flexible cables, polyvinyl chloride insulated and sheathed for lighting chains of class II. Cables for internal and external wiring of luminaires of class II. Cables for portable earthing and short-circuiting equipment. Insulated cables and flexible cords for installations - Twisting resistant flexible cables. Flexible cables for lifts. Insulated cables and flexible cords for installations - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Series of the national type. Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables. 4/6

18 NF ELECTRICAL CONDUCTORS AND CABLES Appendix n 1A NF C NF C NF C NF C NF C NF C NF C C NF C NF C NF C NF C C NF EN C UTE C Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations. Mineral insulated cables with a rated voltage not exceeding 750V - Part 3: Guide to use Insulated cables and flexible cords fo r installations. Fire resistant (class CR1) cables and flexible cords for rated voltages up to and including 0.6/1kV. Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polychloroprene sheath: Series U R 12 N. Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polyvinyl chloride sheath: Series U R 2V (E). Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polyvinyl chloride sheath, with a metallic armour: Series U RFVV (E). Insulated cables and flexible cords for installations. Halogen-free 0.6/1kV cables with improved characteristics in case of fire, type C1, with cross-linked synthetic insulation and with extruded synthetic protective sheath (E). Halogen-free, rigid, 0.6/1 V cables, type C1, complying with IEC Testcategory C, designation F and fire-resisting according to IEC 331, with crosslinked synthetic insulation and with extruded synthetic protective sheath, armoured and non armour Insulated cables and flexible cords for installations. Heating equipment by means of heating cables for embedding into walls of buildings. Insulated cables and flexible cords for installations - Cables for supply leads for heating equipment by means of heating cable for embedding in walls of building. Insulated cables and flexible cords for installations - Cables for supply leads with metallic covering for heating equipment by means of heating cables, with metallic covering, for embedding in walls of building. Insulated cables and flexible cords for installations - Heating equipment by means of heating cables, with metallic covering for embedding into walls of buildings, with low electromagnetic radiation. Insulated cables and flexible cords for installations - Polyethylene insulated cables covered with polyvinyl chloride sheath for cabling and precabling of home electronic systems. Cables for signs and luminous-discharge-tube installations operating from a noload rated output voltage exceeding 1 kv but not exceeding 10kV. Insulated cables and flexible cords for installations - Cables for luminousdischarge-tube installations operating in high voltage from a low voltage installation - Type TNS. Cords for assistance starting of combustion engine road vehicles. 5/6

19 NF ELECTRICAL CONDUCTORS AND CABLES Appendix n 1A ROAD VEHICLES R NF R NF R Vehicles requiring a certificate of registration or vehicles with a maximum total authorised weight of over de 3,5 t intended for transporting hazardous substances. Road vehicles Electrical vehicle drivers General characteristics. Road vehicles Electrical vehicle drivers Testing methods and requirements. TEST PROTOCOLS PE PE PE PE Cross-linked polyvinyl chloride insulated and sheathed flexible cables Cables admitted with braided fabric sheathing in view of being granted the NF- USE Mark. Small-section heating cables with no mechanical protective system. Halogen-free synthetic thermoplastic insulated conductors with C1 category improved fire behaviour characteristics and a voltage rating of 450/750 V Informative note For a certification requirement, the cited referential in this item is the latest editions by default with their eventual amendments. However, owing to the fact that different evolutions from the same referential overlap, the holder can choose and use the right version in the scope of certification process in order to obtain NF Mark. The choice of the standard of certification is determined contractually at the time of the request of certification between the applicant and the LCIE. 6/6

20 AFAQ AFNOR Certification LABORATOIRE CENTRAL Organisme certificateur DES INDUSTRIES ELECTRIQUES 11 Avenue Francis de Pressensé DIRECTION DE LA CERTIFICATION Saint-Denis La plaine Cedex Organisme mandaté 33, Avenue du Général Leclerc FONTENAY-AUX-ROSES NF MARK E LE CTRICAL CONDUCTORS AND CAB LE S RULE S APPENDIX 1B SCOPE OF APPLICATION AFNOR CERTIFICATION Identification N : NF 003 Ref. RHa/MDy Review. n 1 : Février 2005 Date of application : Mai 2005

The NF Mark referential is constituted of this Certification Rules, the relevant standards and of the General Rules of the NF Mark.

The NF Mark referential is constituted of this Certification Rules, the relevant standards and of the General Rules of the NF Mark. Certification Rules Mark Identification n : NF 004 Revision n : 2 september 2007 Application date: 2008/03/10 NF CONDUITS, MOUNTING RAILS AND SIMILAR PRODUCTS FOR ELECTRICAL DUCTING SYSTEMS Mandated Certification

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables

More information

Scheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme

Scheme rules for thermal insulation products for building equipment and industrial installations - VDI certification scheme Scheme rules for thermal insulation products for building equipment and industrial installations - certification scheme April 6, 2011 1. Introduction This document presents the rules of the product certification

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60227-1 Edition 2.2 1998-03 Edition 2:1993 consolidated with amendments 1:1995 and 2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V

More information

ISO 9001 ISO 14001 CABLES AND WIRES CATALOGUE 2008

ISO 9001 ISO 14001 CABLES AND WIRES CATALOGUE 2008 ISO 9001 ISO 14001 CABLES AND WIRES CATALOGUE 2008 INTRODUCTION... 4 CHAPTER I SINGLE CORE NON-SHEATHED CABLES H05V-U, H05V-R, H05V-K... 6 H05V2-U, H05V2-R, H05V2-K... 7 H07V-U, H07V-R, H07V-K... 8 H07V2-U,

More information

Regulations for certification of quality management systems

Regulations for certification of quality management systems Regulations for certification of quality management systems 00 24/04/2013 Annulla e sostituisce il documento Regulations for certification of quality management systems in rev. 14 SG DIR AD Rev. Data Descrizione

More information

IMQ RULES. Contents. IMQ Rules - Product certification

IMQ RULES. Contents. IMQ Rules - Product certification IMQ RULES PRODUCT CERTIFICATION "ELECTRIC ENERGY METERS AND METER UNITS" PRODUCT OF NEW MANUFACTURING Contents IMQ Rules - Product certification Particular Rules for the Electric energy meters and meter

More information

European Technical Assessment Regulation

European Technical Assessment Regulation European Technical Assessment Regulation Date of UBAtc Board of directors acceptance: 16 September 2013 Date of entry into force: 16 September 2013 This version does not supersede any previous version

More information

Regulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004

Regulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004 Regulations for the certification of environmental management systems in conformity with UNI EN ISO 14001:2004 00 24/04/2013 Annulla e sostituisce il documento Regulations for the certification of environmental

More information

MANAGEMENT SYSTEM CERTIFICATION CONDITIONS & USE OF THE CERTIFICATION MARK

MANAGEMENT SYSTEM CERTIFICATION CONDITIONS & USE OF THE CERTIFICATION MARK MANAGEMENT SYSTEM CERTIFICATION CONDITIONS & USE OF THE CERTIFICATION MARK Vehicle Certification Agency 1, The Eastgate Centre Eastgate Road Bristol BS5 6XX Telephone: 0300 330 5797 e-mail: enquiries@vca.gov.uk

More information

FIRE RESISTANT CABLE CONSTRUCTION OF CABLES

FIRE RESISTANT CABLE CONSTRUCTION OF CABLES FIRE RESISTANT CABLE In all fire disasters, fire smoke, heat and toxic fumes are the main obstacles to safe evacuation of a building or area. A major contribution towards overcoming these hazards is the

More information

CHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems

CHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems Date(s) of Evaluation: CHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems Assessor(s) & Observer(s): Organization: Area/Field

More information

EUROPEAN INSPECTION AND CERTIFICATION COMPANY S.A.

EUROPEAN INSPECTION AND CERTIFICATION COMPANY S.A. EUROPEAN INSPECTION AND CERTIFICATION COMPANY S.A. 89 CHLOIS & LIKOVRISEOS STR. - 144 52 METAMORFOSI TEL: +30 210 6253927, 210 6252495 INTERNET SITE: www.eurocert.gr E-mail: eurocert@otenet.gr FAX: +30

More information

Copyright, Language, and Version Notice The official language of this [Certification Protocol] is English. The current version of the [Certification

Copyright, Language, and Version Notice The official language of this [Certification Protocol] is English. The current version of the [Certification Copyright, Language, and Version Notice The official language of this [Certification Protocol] is English. The current version of the [Certification Protocol] is maintained on the Bonsucro website: www.bonsucro.com.

More information

The certification of European construction products

The certification of European construction products The certification of European construction products Every year, SCOR Global P&C s Inherent Defects team organises a morning seminar for its clients (Matinée Décennale), during which a technical subject

More information

Certification Procedure of RSPO Supply Chain Audit

Certification Procedure of RSPO Supply Chain Audit : 1 of 19 Table of Contents 1. Purpose 2. Scope 3. Unit of Certification 3.1 Identity Preserved, Segregation, Mass Balance, 3.2. Book and Claim 4. Definitions 5. Responsibilities 5.1 Head of the Certification

More information

European Organisation for Technical Approvals

European Organisation for Technical Approvals Warrington Certification Limited, Holmesfield Road, Warrington, WA1 2DS Tel. +44 (0) 1925-646777 Fax +44 (0) 1925-646667 Member of EOTA Authorised and notified according to Article 10 of the Council Directive

More information

General Rules for the certification of Management Systems

General Rules for the certification of Management Systems General Rules for the certification of Management Systems Effective from 19/11/2015 RINA Via Corsica 12 16128 Genova - Italy tel. +39 010 53851 fax +39 010 5351000 website : www.rina.org Technical rules

More information

4 IX D N E P P A Installation methods Current-carrying capacity and voltage drop for cables Reference method IET Wiring Matters

4 IX D N E P P A Installation methods Current-carrying capacity and voltage drop for cables Reference method IET Wiring Matters 8 Appendix 4 of BS 7671 by Mark Coles Appendix 4, Current-carrying capacity and voltage drop for cables and flexible cords, has seen significant changes with the publishing of BS 7671:2008. This article

More information

The Electrical Safety Regulation (pre and post 1 January 2014)

The Electrical Safety Regulation (pre and post 1 January 2014) The Electrical Safety Regulation (pre and post 1 January 2014) The following table provides an overview comparison between the Electrical Safety Regulation 2002 (the ESR 2002) current as at 1 July 2013

More information

REGULATION (EEC) No 2309/93

REGULATION (EEC) No 2309/93 REGULATION (EEC) No 2309/93 Council Regulation (EEC) No 2309/93 of 22 July 1993 laying down Community procedures for the authorization and supervision of medicinal products for human and veterinary use

More information

ENERGY. TECWATER S1BN8-F 0,6/1 kv. Cable for Water Application

ENERGY. TECWATER S1BN8-F 0,6/1 kv. Cable for Water Application ENERGY TECWATER S1BN8-F 0,6/1 kv Cable for Water Application Technical Data Electrical parameters Thermal parameters Trademark Type designation Specification Approval Application Rated voltage Maximum

More information

The certification process

The certification process TS004(COS)v01 The certification process for COSMOS standard Standard in force available on www.cosmos-standard.org or sent on request. 1 Contents I. When to apply... 3 II. The different steps in the certification

More information

CONTROL PROCESS NATURAL ORIGIN AND ORGANIC CANDLES AND HOME FRAGRANCES

CONTROL PROCESS NATURAL ORIGIN AND ORGANIC CANDLES AND HOME FRAGRANCES TS004(GPA)v03en v25/11/2015 CONTROL PROCESS NATURAL ORIGIN AND ORGANIC CANDLES AND HOME FRAGRANCES The aim of the present document is to describe the key steps of the control process. This document is

More information

Global cable expertise for rolling stock

Global cable expertise for rolling stock Global cable expertise for rolling stock Global cable expertise for rolling stock Single and multicore Low voltage control cables Jumper cables HV roof cables (25 kv) rubber cables for power needs of locomotives

More information

International Electrotechnical Commission Standards

International Electrotechnical Commission Standards International Electrotechnical Commission Standards Standard IEC 60028 IEC 60038 IEC 60050-461 IEC 60055-1 IEC 60055-2 IEC 60092-101 IEC 60092-350 IEC 60092-351 IEC 60092-352 IEC 60092-353 IEC 60092-354

More information

OLB certification process for Forestry Companies GP01

OLB certification process for Forestry Companies GP01 OLB certification process for Forestry Companies GP01 Reference: GP01 OLB FC 1.2 version, 22/03/2013 Bureau Veritas Certification France 60 Général de Gaulle Avenue - 92046 Paris - La Défense Cedex - France

More information

Application for Renewal or Extension of Certification

Application for Renewal or Extension of Certification Page 1 of 5 Renewal Requirements This Guide will assist you to provide sufficient information to minimise delays in processing your application. To renew your current Certificate of Approval or Certificate

More information

General Rules for the Certification of Management Systems Code: RG

General Rules for the Certification of Management Systems Code: RG General Rules for the Certification of Management Systems Code: RG Drafted on: 1 April 2012 Effective from: 1 October 2012 TABLE OF CONTENTS CHAPTER TITLE PAGE CHAPTER 1 GENERAL 3 CHAPTER 2 REFERENCE STANDARD

More information

TYPE CERTIFICATION OF WIND TURBINES

TYPE CERTIFICATION OF WIND TURBINES TYPE CERTIFICATION OF WIND TURBINES March 2003, rev. 9 DET NORSKE VERITAS, DANMARK A/S Building 114 Frederiksborgvej 399 P. O. Box 49 DK-4000 Roskilde Denmark Email: Wind.Turbine.Certification@dnv.com

More information

Australian Standard. Intruder alarm systems. Part 1: Systems installed in client s premises AS 2201.1 1998

Australian Standard. Intruder alarm systems. Part 1: Systems installed in client s premises AS 2201.1 1998 AS 2201.1 1998 Australian Standard Intruder alarm systems Part 1: Systems installed in client s premises This Australian Standard was prepared by Committee EL/31, Intruder Alarm Equipment and Installations.

More information

Application for Approved (Overseas/Local) Third Party Inspection Agency for Lifting Equipment

Application for Approved (Overseas/Local) Third Party Inspection Agency for Lifting Equipment Occupational Safety and Health Division 18 Havelock Road #03-02 Singapore 059764 Tel: 64385122 www.mom.gov.sg mom_oshd@mom.gov.sg Application for Approved (Overseas/Local) Third Party Inspection Agency

More information

e-mobility Special cables for electric vehicles Coroplast Fritz Müller GmbH & Co. KG Tapes Cables Cable Assemblies

e-mobility Special cables for electric vehicles Coroplast Fritz Müller GmbH & Co. KG Tapes Cables Cable Assemblies www.echtzeit.com e-mobility Coroplast Fritz Müller GmbH & Co. KG Tapes Cables Cable Assemblies Special cables for electric vehicles Wittener Straße 271 D-42279 Wuppertal Phone +49(0)202.2681.228 Fax +49(0)202.2681.360

More information

Frequently Asked Questions. Unannounced audits for manufacturers of CE-marked medical devices. 720 DM 0701-53a Rev 1 2014/10/02

Frequently Asked Questions. Unannounced audits for manufacturers of CE-marked medical devices. 720 DM 0701-53a Rev 1 2014/10/02 Frequently Asked Questions Unannounced audits for manufacturers of CE-marked medical devices 720 DM 0701-53a Rev 1 2014/10/02 What is an unannounced audit?... 6 Are unannounced audits part of a new requirement?...

More information

IAF Mandatory Document. Witnessing Activities for the Accreditation of Management Systems Certification Bodies. Issue 1, Version 2 (IAF MD 17:2015)

IAF Mandatory Document. Witnessing Activities for the Accreditation of Management Systems Certification Bodies. Issue 1, Version 2 (IAF MD 17:2015) IAF Mandatory Document Witnessing Activities for the Accreditation of Management Systems Certification Bodies (IAF MD 17:2015) Witnessing Activities for the Accreditation Page 2 of 18 The (IAF) facilitates

More information

UGVCL/SP/591/11KV HT AB CABLE

UGVCL/SP/591/11KV HT AB CABLE TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched

More information

LAW FOR THE ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE. Chapter two. ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE

LAW FOR THE ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE. Chapter two. ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE LAW FOR THE ELECTRONIC DOCUMENT AND ELECTRONIC SIGNATURE Prom. SG. 34/6 Apr 2001, amend. SG. 112/29 Dec 2001, amend. SG. 30/11 Apr 2006, amend. SG. 34/25 Apr 2006, amend. SG. 38/11 May 2007 Chapter one.

More information

VIPERFLEX ELECTRIC CABLE

VIPERFLEX ELECTRIC CABLE VIPERFLEX Flexible Low Voltage Electric Cable - 0.6/1kV (Rubber insulated) H07 RN-F & H07 BN-F Single Core 2-Core 2-Core and Earth 3-Core and Earth 4-Core and Earth Multi-Core and Earth H07 RCN-F & H07

More information

TG 47-01. TRANSITIONAL GUIDELINES FOR ISO/IEC 17021-1:2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES

TG 47-01. TRANSITIONAL GUIDELINES FOR ISO/IEC 17021-1:2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES TRANSITIONAL GUIDELINES FOR ISO/IEC 17021-1:2015, ISO 9001:2015 and ISO 14001:2015 CERTIFICATION BODIES Approved By: Senior Manager: Mpho Phaloane Created By: Field Manager: John Ndalamo Date of Approval:

More information

Flygt flexible cables

Flygt flexible cables Flygt flexible cables Contents Standards General SUBCAB 4 Screened SUBCAB 6 Rubber cable type: NSSHÖU-J 7 Screened rubber cable type: NSSHÖU../E + ST 8 FGB screened rubber cable 9 PUR control cable 0 HCR

More information

FLEXIBLE INDUSTRIAL CABLES H07RN-F TENAFLEX SR

FLEXIBLE INDUSTRIAL CABLES H07RN-F TENAFLEX SR FLEXIBLE INDUSTRIAL CABLES H07RN-F TENAFLEX SR Standards : CENELEC HD 22.4 NF C 32-102-4 DIN VDE 0282-1 and VDE 0282-4 BS 6007 and BS 6500 IEC 60245-4 Rated voltage Rated voltage: 450/750 V (Use up to

More information

Medical Devices : Guide to defining a test strategy

Medical Devices : Guide to defining a test strategy Medical Devices : Guide to defining a test strategy November 2014 Copyright 2015 LNE - www.lne. 1 This guide is a document intended to support medical device manufacturers/importers as they plan the preclinical

More information

Certification process ECOCERT Ecological & Recycled Textile Standard

Certification process ECOCERT Ecological & Recycled Textile Standard Certification process ECOCERT Ecological & Recycled Textile Standard Annex 5 - Ecological & Recycled Textiles Standard - ERTS 1 Contents 1/ Ecological & Recycled Textile Standard... p3 2/ ERTS certification

More information

Certification rules for the mark

Certification rules for the mark Identification No.: NF148 Version No.: 2 Date of approval: 13/12/2012 Edition date: 19/12/2012 Certification rules for the mark Validation of analysis methods Application to water analysis APPENDIX Validation,

More information

DVC Product Certification - affiliated to the Danish Technological Institute

DVC Product Certification - affiliated to the Danish Technological Institute PROD Reg. No. 7002 DVC Product Certification DVC Product Certification - affiliated to the Danish Technological Institute Requirements concerning Certification of Products and their Compliance with the

More information

Flexible cables for submersible products

Flexible cables for submersible products Flexible cables for submersible products Standards SUBCAB cables complies with the following general standards: IEC 6045 (general) IEC 608 class 5 (conductor) IEC 608-- CLAUSE 9 (oil resistant) IEC 608--

More information

DQS UL ASSESSMENT AND CERTIFICATION REGULATIONS

DQS UL ASSESSMENT AND CERTIFICATION REGULATIONS DQS UL ASSESSMENT AND CERTIFICATION REGULATIONS 1. Certification and Assessment Services 1.1 Scope and Applicability These DQS UL Certification and Assessment Regulations apply to all certification and

More information

CB Test Certificates

CB Test Certificates IECEE OD-2037-Ed.1.5 OPERATIONAL & RULING DOCUMENTS CB Test Certificates OD-2037-Ed.1.5 IECEE 2011 - Copyright 2011-09-30 all rights reserved Except for IECEE members and mandated persons, no part of this

More information

Space Project Management

Space Project Management EUROPEAN COOPERATION FOR SPACE STANDARDIZATION Space Project Management Information/Documentation Management Secretariat ESA ESTEC Requirements & Standards Division Noordwijk, The Netherlands Published

More information

LightingEurope EU Compliant Requirements Products Sheets for LIGHTING COMPONENTS

LightingEurope EU Compliant Requirements Products Sheets for LIGHTING COMPONENTS LightingEurope EU Compliant Requirements Products Sheets for LIGHTING COMPONENTS 1 st Edition 29 th November 2013 Table of content a. Disclaimer... 3 b. Introduction... 3 c. Summary check lists for components...

More information

Disciplinary and dismissal procedures for school staff

Disciplinary and dismissal procedures for school staff Revised guidance for governing bodies Guidance Welsh Assembly Government Circular Date of issue: procedures for school staff Audience Overview Action required Further information Additional copies Governing

More information

The Quality Connection. BETAflam Fire Resistant Safety Cables

The Quality Connection. BETAflam Fire Resistant Safety Cables The Quality Connection BETAflam Fire Resistant Safety Cables 2 Contact Consulting and sales Switzerland Phone +41 (0)62 288 82 82 Fax +41 (0)62 288 83 83 sales@leoni-studer.ch www.leoni-infrastructure-datacom.com

More information

Cable flexibility Flexible. Chemical resistance Accidental

Cable flexibility Flexible. Chemical resistance Accidental H07RN-F Industrial flexible cable, insulation and outer sheath in elastomer Description pplication H07RN-F flexible cable is intended for installations with moving equipment, electric appliances and for

More information

SQF 2000 Certification Trade Mark

SQF 2000 Certification Trade Mark SQF 2000 Certification Trade Mark Rules for Use 8th Edition NOVEMBER 2005 Safe Quality Food Institute 2345 Crystal Drive, Suite 800 Arlington, VA 22202 USA 202-220-0635 www.sqfi.com SQF Institute is a

More information

REGULATIONS FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS

REGULATIONS FOR THE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE AND SCOPE 2. GENERAL PRINCIPLES AND GUARANTEES FOR THE CLIENT 3. STATUTORY AND REGULATORY REQUIREMENTS AND LEGALITY CONTROL LIMITS 4. ACCESS REQUIREMENTS FOR CERTIFICATION 5. CERTIFICATION

More information

ScottishPower Distribution Cables & Equipment. Metal Theft

ScottishPower Distribution Cables & Equipment. Metal Theft ScottishPower Distribution Cables & Equipment Metal Theft April 2012 As an aid to deterring to metal theft this booklet has been put together to help identify the types of utility power cables and associated

More information

Fire Resistant Cables

Fire Resistant Cables 109/4 Fire Resistant Cables SR 114H Standard - SR 114E Enhanced BS 5839-1 BS 7629-1 BS 6387 BS 8434-1/2 BS 6425 BS 7622 EN 50200 World-wide recognized high quality cables Firecel SR114 are used in: Data

More information

No. 44/2006 PART I GENERAL PROVISIONS AND AUTHORITY ENFORCEMENT

No. 44/2006 PART I GENERAL PROVISIONS AND AUTHORITY ENFORCEMENT Ministry of Social Affairs and Health Unofficial translation No. 44/2006 Act on Occupational Safety and Health Enforcement and Cooperation on Occupational Safety and Health at Workplaces (as amended by

More information

Of wires & cables having nominal voltage up to 1000 V and heat resistant wire & cables, ambient temperature 30 C. Cable or lead category

Of wires & cables having nominal voltage up to 1000 V and heat resistant wire & cables, ambient temperature 30 C. Cable or lead category Table 12-1: Power rating : Power Rating Basic Table ÖLFLEX Of wires & cables having nominal voltage up to 1000 V and heat resistant wire & cables, ambient temperature 30 C Method of installation A Single

More information

Chapter I: Anti-counterfeiting measures

Chapter I: Anti-counterfeiting measures Foreword 1. Counterfeiting is a real scourge on today s society. It can fool consumers and threaten their health and safety, especially when counterfeit products do not respect applicable standards or

More information

Act on Investment Firms 26.7.1996/579

Act on Investment Firms 26.7.1996/579 Please note: This is an unofficial translation. Amendments up to 135/2007 included, May 2007. Act on Investment Firms 26.7.1996/579 CHAPTER 1 General provisions Section 1 Scope of application This Act

More information

Chemical resistance Accidental

Chemical resistance Accidental Industrial flexible cable, insulation and outer sheath in elastomer Description Application TITANEX flexible cable is intended for installations with moving equipment, electric appliances and for building

More information

Network Certification Body

Network Certification Body Network Certification Body Scheme rules for assessment of railway projects to requirements of the Railways Interoperability Regulations as a Notified and Designated Body 1 NCB_MS_56 Contents 1 Normative

More information

REACTION TO FIRE CLASSIFICATION REPORT No. RA15-0088 ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013

REACTION TO FIRE CLASSIFICATION REPORT No. RA15-0088 ACCORDING TO THE EUROPEAN STANDARD NF EN 13501-1+A1:2013 SAFETY, STRUCTURES AND FIRE DEPARTMENT Reaction to Fire REACTION TO FIRE CLASSIFICATION REPORT No. RA150088 ACCORDING TO THE EUROPEAN STANDARD 135011+A1:2013 Notification by the French Government to the

More information

Certification Regulations and Requirements. International Certification Management GmbH

Certification Regulations and Requirements. International Certification Management GmbH Certification Regulations and Requirements of (ICM) General These Certification Regulations and Requirements apply to the auditing, certification and maintenance of the certification of management systems.

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60364-5-54 Second edition 2002-06 BASIC SAFETY PUBLICATION Electrical installations of buildings Part 5-54: Selection and erection of electrical equipment Earthing arrangements,

More information

Festoon 715 P PUR cable for flexible application in festoon systems

Festoon 715 P PUR cable for flexible application in festoon systems CABLES FOR CRANE AND CONVEYOR APPLICATIONS Festoon 715 P PUR cable for flexible application in festoon systems S AB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C Marking for Festoon 715 P 07150162:

More information

Anti-Doping Convention

Anti-Doping Convention Anti-Doping Convention Strasbourg, 16.XI.1989 The 2006 Prohibited List Additional Protocol Explanatory Report Français Preamble The member States of the Council of Europe, the other States party to the

More information

CONFLEX ELECTRIC CABLE

CONFLEX ELECTRIC CABLE CONFLEX ELECTRIC CABLE CONFLEX - 0.6/1kV Flexible VSD/EMC Cables Applications WW VSD/EMC cables are manufactured for use where electrical interference distorts signal transmission in electric motors. Standard

More information

CABLES FOR PHOTOVOLTAIC SOLAR ENERGY INSTALLATIONS FOR CLEAN ENERGY

CABLES FOR PHOTOVOLTAIC SOLAR ENERGY INSTALLATIONS FOR CLEAN ENERGY CABLES FOR PHOTOVOLTAIC SOLAR ENERGY INSTALLATIONS FOR CLEAN ENERGY One Company Connecting The World POWERFUL PRESENCE PRODUCTS PERFORMANCE PEOPLE General Cable has been a wire and cable innovator for

More information

Instructions for Safe Use

Instructions for Safe Use Instructions for Safe Use (Certification N:o VTT 08 ATEX 029) Thank you for choosing Slam Trans portable transformer for your job site. Purpose of this manual is to provide you all the necessary safety

More information

QUALITY SYSTEM REQUIREMENTS FOR PHARMACEUTICAL INSPECTORATES

QUALITY SYSTEM REQUIREMENTS FOR PHARMACEUTICAL INSPECTORATES PHARMACEUTICAL INSPECTION CONVENTION PHARMACEUTICAL INSPECTION CO-OPERATION SCHEME PI 002-3 25 September 2007 RECOMMENDATION ON QUALITY SYSTEM REQUIREMENTS FOR PHARMACEUTICAL INSPECTORATES PIC/S September

More information

PRODUCT CERTIFICATION RULES GOVERNING THE SCHEME JANUARY 2006

PRODUCT CERTIFICATION RULES GOVERNING THE SCHEME JANUARY 2006 THE GAS SAFETY CERTIFICATION FOR GAS APPLIANCES AND COMPONENTS PRODUCT CERTIFICATION RULES GOVERNING THE SCHEME JANUARY 2006 MKP220.01 Issue Date: 2007-Oct-09 SAI Global Limited Copyright 2007 - ABN 67

More information

DIRECTIVE 2014/32/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

DIRECTIVE 2014/32/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL 29.3.2014 Official Journal of the European Union L 96/149 DIRECTIVE 2014/32/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61156-5 First edition 2002-03 Multicore and symmetrical pair/quad cables for digital communications Part 5: Symmetrical pair/quad cables with transmission characteristics up

More information

Adopt the following: Section A

Adopt the following: Section A Grand-Ducal Regulation of 9 July 2013 determining the requirements for the professional qualification of Réviseur d Entreprises pursuant to the Law of 18 December 2009 on the audit profession We Henri,

More information

Electrical Practices for Construction Work

Electrical Practices for Construction Work 1. Purpose Electrical Practices for Construction Work The purpose of this Code is to provide practical guidance and set minimum safety requirements for electrical practices on all construction sites in

More information

White paper. SACE Tmax XT Circuit-Breaker Terminals and Connection

White paper. SACE Tmax XT Circuit-Breaker Terminals and Connection White paper SACE Tmax XT Circuit-Breaker Terminals and Connection Circuit-Breaker Terminals and Connections Index Introduction... 2 1. Components used for wiring... 3 1.1. Electrical...3 1.2. Flexibility

More information

DRAFT GUIDANCE DOCUMENT ON THE LOW VOLTAGE DIRECTIVE TRANSITION

DRAFT GUIDANCE DOCUMENT ON THE LOW VOLTAGE DIRECTIVE TRANSITION EUROPEAN COMMISSION Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs Industrial Transformation and Advanced Value Chains Advanced Engineering and Manufacturing Systems DRAFT

More information

DIVISION OF CORPORATIONS, BUSINESS AND PROFESSIONAL LICENSING

DIVISION OF CORPORATIONS, BUSINESS AND PROFESSIONAL LICENSING Statutes and Regulations Public Accountancy October 2014 (Centralized Statutes and Regulations not included) DEPARTMENT OF COMMERCE, COMMUNITY, AND ECONOMIC DEVELOPMENT DIVISION OF CORPORATIONS, BUSINESS

More information

DOMESTIC ELECTRICAL INSTALLATION CERTIFICATE (Requirements for Electrical Installations BS 7671 IEE Wiring Regulations)

DOMESTIC ELECTRICAL INSTALLATION CERTIFICATE (Requirements for Electrical Installations BS 7671 IEE Wiring Regulations) DOMESTIC ELECTRICAL INSTALLATION CERTIFICATE (Requirements for Electrical Installations BS 7671 IEE Wiring Regulations) DETAILS OF THE CLEINT Client and address ADDRESS OF THE INSTALLATION Installation

More information

FAMI-QS Certification Rules for Operators. Rules for Operators

FAMI-QS Certification Rules for Operators. Rules for Operators Rules for Operators TABLE OF CONTENTS 1. Application for certification and FAMI QS associate membership...2 2. Assessment of operators...3 2.1. Audit planning...3 2.2. Frequency of audits and re certification...5

More information

Catalogue Câbles d Energie

Catalogue Câbles d Energie Catalogue Câbles d Energie Conductores Tecnológicos S.A. www.contecsa.es Index Page Introduction 13 RV 14 RVMV 15 RVSV 16 RVFV 17 Conductores Tecnológicos S.A. 2 www.contecsa.es INTRODUCTION Câbles d Energie

More information

Mutual Recognition Arrangements (MRA) Scheme. Designating Local Testing Laboratories and Certification Bodies for Conformity Assessment

Mutual Recognition Arrangements (MRA) Scheme. Designating Local Testing Laboratories and Certification Bodies for Conformity Assessment Mutual Recognition Arrangements (MRA) Scheme Designating Local Testing Laboratories and Certification Bodies for Conformity Assessment IDA MRA DES SCHEME Issue 4 Rev 1, August 2015 Info-Communications

More information

Manual for ITC's clients, 2013. Conformity assessment of ACTIVE IMPLANTABLE MEDICAL DEVICES pursuant to Council Directive 90/385/EEC

Manual for ITC's clients, 2013. Conformity assessment of ACTIVE IMPLANTABLE MEDICAL DEVICES pursuant to Council Directive 90/385/EEC Manual for ITC's clients, 2013 Conformity assessment of ACTIVE IMPLANTABLE MEDICAL DEVICES pursuant to Council Directive 90/385/EEC Institute for Testing and Certification, inc., Czech Republic, EU 1.

More information

INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN

INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN INSTALLATION ELECTRICIAN / MAINTENANCE ELECTRICIAN APPRENTICESHIP ASSESSMENT PLAN Introduction and Overview This assessment plan is to accompany the Installation Electrician / Maintenance Electrician level

More information

Option Table - Directive on Statutory Audits of Annual and Consolidated Accounts

Option Table - Directive on Statutory Audits of Annual and Consolidated Accounts Option Table - Directive on Statutory Audits of Annual and Consolidated Accounts The purpose of this document is to highlight the changes in the options available to Member States and Competent Authorities

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies providing audit and certification of management systems

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Requirements for bodies providing audit and certification of management systems INTERNATIONAL STANDARD This is a preview - click here to buy the full publication ISO/IEC 17021 Second edition 2011-02-01 Conformity assessment Requirements for bodies providing audit and certification

More information

Assessment Scheme Rules for the OFTEC Oil Firing Technician

Assessment Scheme Rules for the OFTEC Oil Firing Technician Assessment Scheme Rules for the OFTEC Oil Firing Technician 1. Introduction This document contains the Scheme Rules applied by NICEIC Certification in the operation of the UK oil industry s Nationally

More information

Important Information: Complete Terms and Conditions are printed on sales invoices

Important Information: Complete Terms and Conditions are printed on sales invoices Important Information: Complete Terms and Conditions are printed on sales invoices Notice: L&H Group is continually working to improve and add new products to the Cable Express product range. For this

More information

SCHEDULE ' A' TECHNICAL SPECIFICATION FOR 11/22/33KV H.T.XLPE POWER CABLE FOR DISTRIBUTION NETWORK IN MAHARASHTRA (SPECIFICATION NO.

SCHEDULE ' A' TECHNICAL SPECIFICATION FOR 11/22/33KV H.T.XLPE POWER CABLE FOR DISTRIBUTION NETWORK IN MAHARASHTRA (SPECIFICATION NO. SCHEDULE ' A' TECHNICAL SPECIFICATION FOR 11/22/33KV H.T.XLPE POWER CABLE FOR DISTRIBUTION NETWORK IN MAHARASHTRA (SPECIFICATION NO.MM/I/HTXLPE/2006) MAHARASHTRA STATE ELECTRICITY DISTRIBUTION CO.LTD.

More information

THE UK GREENHOUSE GAS EMISSIONS TRADING SCHEME 2002

THE UK GREENHOUSE GAS EMISSIONS TRADING SCHEME 2002 THE UK GREENHOUSE GAS EMISSIONS TRADING SCHEME 2002 PART A - INTRODUCTION A1. Citation and purposes of scheme A2. Interpretation A3. Participation in the scheme ARRANGEMENT OF SCHEME PART B - EMISSIONS

More information

CP14 ISSUE 5 DATED 1 st OCTOBER 2015 BINDT Audit Procedure Conformity Assessment and Certification/Verification of Management Systems

CP14 ISSUE 5 DATED 1 st OCTOBER 2015 BINDT Audit Procedure Conformity Assessment and Certification/Verification of Management Systems Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org CP14 ISSUE 5 DATED 1 st OCTOBER

More information

1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1

1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1 1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1 1 SUBJECT AND FIELD OF APPLICATION This document constitutes the special regulations

More information

PRCP CE. Version 5.0 of 16 June 2013. Date of entry into force: 1 July 2013

PRCP CE. Version 5.0 of 16 June 2013. Date of entry into force: 1 July 2013 npo Founded by SECO and BBRI PARTICULAR RULES FOR THE CERTIFICATION OF PRODUCTS AND PRODUCTION CONTROL SYSTEMS WITHIN DE FRAMEWORK OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION N 305/2011 PRCP CE Version

More information

VdS Guidelines for the Certification of quality management systems

VdS Guidelines for the Certification of quality management systems VdS Guidelines for the Certification of quality management systems VdS 2343en : 2015-09 (11) VdS 2343en : 2015-09 (11) Certification of quality management systems VdS Guidelines VdS Guidelines for the

More information

COMMISSION REGULATION (EU)

COMMISSION REGULATION (EU) L 122/22 Official Journal of the European Union 11.5.2011 COMMISSION REGULATION (EU) No 445/2011 of 10 May 2011 on a system of certification of entities in charge of maintenance for freight wagons and

More information

Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme

Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme Presentation by BSI on the main changes to the IATF ISO/TS 16949 certification scheme ISO/TS 16949 IATF Scheme rules 4 th edition areas that impact BSI Clients Copyright 2014 BSI. All rights reserved.

More information

Article 10 - ADMINISTRATIVE SECTION

Article 10 - ADMINISTRATIVE SECTION Article 10 - ADMINISTRATIVE SECTION 10.1 TITLE These Administrative Regulations along with the requirements included in the 2011 Edition of the National Electrical Code (NFiPA-70-2011) as adopted by the

More information