Curriculum Vitae DOWN TO EARTH QUALITY SERVICES. Willem van den Biggelaar. November Quality & Regulatory consultant
|
|
- Allen Lawson
- 8 years ago
- Views:
Transcription
1 PROCESS VISION DOWN TO EARTH QUALITY SERVICES Curriculum Vitae Willem van den Biggelaar Quality & Regulatory consultant 27 years of experience in multi disciplinary (medical) product development & production environments. Pragmatic and result driven. Medical Regulatory Affairs consultant 8 years Certified ISO 9001/13485 lead auditor 3 years Medical Quality Assurance consultant 12 years Process Improvement consultant 5 years Project leader 2 years System tester 1 year Software engineer 7 years November 2015 PROCESS VISION GSM INFO@PROCESSVISION.NL
2 1. Management Summary Willem starts his career in 1985 after receiving his bachelor s degree in Electronics. For 12 years he worked as a software engineer, next as system tester and finally as project leader Customers were companies like Océ vd Grinten, Organon Technica, Philips Medical Systems and Dräger Medical Electronics. From 1997 onwards, he switches to a Quality Assurance (QA) and Regulatory Affairs (RA) function. Customers are legal manufacturers of medical devices like Philips Consumer Lifestyle (CL), Philips Healthcare, Philips Healthcare Incubators (AdapTx, Digital Pathology & Handheld Diagnostics), MediSpirit, Ventinova Medical, UTC Imaging and Dorc International. Development and production suppliers for medical device legal manufacturers like Frencken Mechatronics and CCM are also part of the portfolio. Non-medical companies like ASML, Philips Applied Technologies, Centric TSolve and EventIS have been customer of Process Vision. His expertise is threefold 1. setup, deploy and maintain a QMS compliant with ISO 9001 / and FDA CFR setup submission file for Europe, US, Canada and China 3. Consult (medical device) development projects and production sites on QA and RA matters For Ventinova Medical, Philips Digital Pathology, CCM and Frencken Mechatronics this led to an ISO13485 certification. For Philips CL and Ventinova Medical the certificate was extended with CMDCAS. For Philips Consumer Lifestyle, MediSpirit, UTC and Dorc this has led to European and US market access. Per 2011 Willem is a certified lead auditor for ISO9001, ISO13485 and CMDCAS ISO13485 for DEKRA certification B.V. As a trainer he has developed and given courses on ISO13485, ISO13485 Auditor, CE and FDA and CMDCAS medical device regulatory, medical device regulatory for standalone software medical devices, CMMI process areas, inspections, requirements management, software testing and quality assurance. From 2007 till 2010 he has been member of the program committee for the annual QA&Test conference in Bilbao, Spain. Process Vision - Down to earth Quality Services Page 2 of 16
3 2. General A. Personal details Name W.F.M. van den Biggelaar Address Koningskruis 1, 5081 XM Hilvarenbeek, the Netherlands Place and date of birth Biest-Houtakker, 24 september 1963 Nationality Dutch Languages fluent English, moderate German B. Knowledge of regulations, models & standards Regulations Standards & Guidelines Assessment methods Process models FDA 21 CFR part 820, part 11, Medical Device Directive (MDD) 93/42/EEC, IVD Medical Directive 98/79/EC, CMDCAS MDR SOR98-282, Machine Directive (MD) 2006/42/EC ISO13485, ISO14971, IEC62304, IEC62366, ISO , ISO9001, MEDDEV ISO17021, CMM(I): Philips Assessment Method (PAM) CMM(I), TMM, SCRUM C. Education Period Institute Education Institute for Career & Development Bedrijfskundig management IHBO, Eindhoven HTS-Electrotechniek, Technische Computerkunde Odulphus lyceum, Tilburg Atheneum-B D. Courses Process, Quality & Regulatory 2015 DEKRA Council Directive 93/42/EEC 2011 Mikrocentrum Medical Devices Release routes and QSR for U.S.A. (FDA) 2010 KEMA Quality ISO 13485:2003 and auditing 2010 Accademia Qualitas Canadian Medical Devices Conformity Assessment System (CMDCAS) 2009 Qserve Medical Device Regulations European Union (CE) 2008 CTT Philips Appraisal Workshop for CMMI (PAW) 2005 Philips Medical Capability Maturity Model Integrated (CMMI) 2005 Philips CTI Software Configuration Management 2003 Philips Medical Size estimations 2001 CTT Accelerated SPI 2000 AAS Personal Software Process 1999 PAO Usability testing 1998 ASML Total Quality Management 1998 AAS CMM training 1996 PAO Software Metrics 1996 CTT Philips Assessment Method for CMM (PAM) 1995 ISES Testing of realtime systems 1994 ISES Project management for projectmanagers 1993 CTT Capability Maturity Model (CMM) 1990 ISES Project management for designers Personal training 2000 AAS Discussion skills for consultants 1998 Schouten & Nelissen Discussion skills for consultants Process Vision - Down to earth Quality Services Page 3 of 16
4 1998 Schouten & Nelissen Negotiating and conflict handling 1994 Metavisie Presentation skills 1988 Mansal Customer service training 1988 Comdes Communication skills ICT methods and tools 1997 IT opleidingen MS Project 1993 Post HBO System Design 1992 PAO Object oriënted methods 1991 Novi Ambi HP AT computing Unix systems 1990 ISES Relational databases 1990 ISES Data communication and networks 1989 Jackson Jackson Structured Design for real time systems E. Supporting tools Project Planning & Tracking Configuration Management / Document Management Systems Change Control Code Quality Microsoft Project, Niku open workbench Sharepoint, CodeManager, SCCS, RCS, Continuus, ClearCase, TestTrack Pro, Perforce, (Tortoise)CVS, FIT tracker, Agile ClearQuest, Fast Issue tracker, DDTS, Track QA-C (++), Lint, Purify, C-Cover, Code Wizard Process Vision - Down to earth Quality Services Page 4 of 16
5 3. Recommendations Process Vision - Down to earth Quality Services Page 5 of 16
6 Process Vision - Down to earth Quality Services Page 6 of 16
7 Process Vision - Down to earth Quality Services Page 7 of 16
8 Process Vision - Down to earth Quality Services Page 8 of 16
9 4. Work Experience Track record on medical device market clearance Task Application Classification Routes Market Status at that Setup CE file Setup CE file and ISO QMS Setup CE file Setup FDA & ISO QMS; Define CE / 510k file Setup FDA & ISO QMS Get FDA clearance TENS / Bluetouch pain management devices Handheld lung function measuring device for infants Ultrasound Tissue Characterization Scanner Medical device for cancer treatment IVD digital pathology medical system Anterior & posterior ophthalmic surgery device moment IIa II n/a EU CE clearance TENS Q IIa -- II n/a EU CE clearance January 2013; ISO certificate April 2013; I -- VII n/a EU On the market, no clearance needed IIb 2 III + V 510k EU + No CE or FDA yet US US ISO certificate March k FDA FDA clearance in January 2008 Quality Assurance & Regulatory Affairs consultant Period Customer Task now Philips Health IGT Systems Best Internal Lead auditor 2014 now Ventinova Medical B.V. QA manager 2011 now DEKRA certification ISO 9001 / / CMDCAS audits 2012 now MediSpirit Setup and maintain ISO certified QMS Maintain CE file, Setup CFDA file Setup and maintain ISO certified QMS Centre Concepts Mechatronics 2012 now Philips Consumer Lifestyle Pain QA\RA consultant two medical device projects Management Make QMS CMDCAS compliant Q Philips Healthcare Incubator Handheld Maintain ISO QMS for IVD product Philips Healthcare Incubator AdapTx Setup FDA / ISO certified QMS UTC Imaging Setup CE file Frencken Mechatronics Setup ISO certified QMS Setup FDA compliant production line 2009 Philips Healthcare Incubator Digital Setup FDA / ISO certified QMS for IVD product Pathology 2008 Sintecs Setup QMS 2008 Philips Healthcare PII (ICAP) Medical QA officer 2007 DORC Get FDA clearance on software device 2007 EventIS QA & CM manager 2006 Centric Tsolve Setup CMM-I compliant QMS Philips Medical Cardio Vasculair (ixr) Medical System QA officer Philips Medical Components (ixr) Medical Software QA officer 2001 Philips Medical, Components (ixr) Group leader SQA team /SPI coordinator 2000 Philips ASA lab System QA officer Process Vision - Down to earth Quality Services Page 9 of 16
10 ASML Software QA officer Project leader Period Customer Role 2010 Centre Concepts Mechatronics Project lead ISO certification Dräger Project lead redesign software package 1992 Van Aaken Project lead conversion software Consultant / Trainer Period Customer Consultancy / Course Stan Ackermans, TU Eindhoven Quality Control & Quality Assurance 2006 QA&Test, Spain Requirements Management 2004 Fontys Eindhoven Quality Assurance 2002 Philips RTG Requirements Management/Engineering 2001 Getronics Fagan Inspection 2001 SERC Requirements Management Origin Safer-C + inspection ASML Course coordinator 1996 VDO Car Systems Test process software department 1986 Ministry of Defense Course coordinator Software & Test Engineer Period Customer 1995 Dräger Philips Medical, Cardio Vascular & Magnetic Resonance 1993 Philips Nederland Van Aaken / Brinkman Organon Technica 1998 Océ vd Grinten Autolease Holland Process Vision - Down to earth Quality Services Page 10 of 16
11 5. Relevant details work experience Process Vision - Down to earth Quality Services Page 11 of 16
12 Process Vision - Down to earth Quality Services Page 12 of 16
13 Process Vision - Down to earth Quality Services Page 13 of 16
14 Process Vision - Down to earth Quality Services Page 14 of 16
15 Process Vision - Down to earth Quality Services Page 15 of 16
16 Process Vision - Down to earth Quality Services Page 16 of 16
Curriculum Vitae: Hans Jonker
Argonautenlaan 2 5631 LL Eindhoven The Netherlands GSM: +31 (0) 6 55 85 49 25 info@argoconsultancy.eu www.argoconsultancy.eu Rabo: 1058.00.945 BTW: NL0748.09.246.B01 CoC: 17 21 74 27 Curriculum Vitae:
More informationMedical Device Training Program 2015
Medical Device Training Introduction Supplementary training and education is often overlooked by medical device professionals until it is triggered by an upcoming FDA or Notified Body and/or ISO 13485
More informationUNDERSTANDING THE EC DIRECTIVE 98/79/EC ON IN VITRO DIAGNOSTIC MEDICAL DEVICES
UNDERSTANDING THE EC DIRECTIVE 98/79/EC ON IN VITRO DIAGNOSTIC MEDICAL DEVICES A WHITE PAPER ON THE REQUIREMENTS, REGULATIONS AND OPPORTUNITIES CONTAINED IN EC DIRECTIVE 98/79/EC AND A BRIEF COMPARISON
More informationQuality Management System Certification. Understanding Quality Management System (QMS) certification
Quality Management System Certification Understanding Quality Management System (QMS) certification The medical device manufacturing sector is one of the most regulated sectors in which significant quality
More informationMedical Devices. Notified Bodies and the CE certification Process for Medical Devices. European Surgical Robotics Demonstration Day
Medical Devices Notified Bodies and the CE certification Process for Medical Devices European Surgical Robotics Demonstration Day 27 th March 2014, Leuven, Belgium 1 Bart Mersseman Product Manager Medical
More informationWHITEPAPER: SOFTWARE APPS AS MEDICAL DEVICES THE REGULATORY LANDSCAPE
WHITEPAPER: SOFTWARE APPS AS MEDICAL DEVICES THE REGULATORY LANDSCAPE White paper produced by Maetrics For more information, please contact global sales +1 610 458 9312 +1 877 623 8742 globalsales@maetrics.com
More informationMedical Device Software Do You Understand How Software is Regulated?
Medical Device Software Do You Understand How Software is Regulated? By Gregory Martin Agenda Relevant directives, standards, and guidance documents recommended to develop, maintain, and validate medical
More informationQuality Management System Certification. Understanding Quality Management System (QMS) certification
Quality Management System Certification Understanding Quality Management System (QMS) certification The medical device manufacturing sector is one of the most regulated sectors in which significant quality
More informationBSI Unannounced Audits
BSI Unannounced Audits Frequently Asked Questions (FAQs) BSI Group Kitemark Court, Davy Avenue Knowlhill, Milton Keynes MK5 8PP, United Kingdom T: +44 845 080 900 Certification.sales@bsigroup.com bsigroup.com
More informationImproving innovation processes. Philips Industry Consulting
Improving innovation processes Philips Industry Consulting Making innovation 2 Philips Industry Consulting faster, leaner and more effective Bring new products to market faster, at lower cost and with
More informationPhilipp Fuchs. Profile. Manager EDUCATION. 2004 Information scientist in Service Management with Swiss diploma. 1985 Kantonsschule Rämibühl Zürich
Profile Philipp Fuchs Manager Email: philipp.fuchs@arcondis.com EDUCATION PROFESSIONAL TRAINING 2004 Information scientist in with Swiss diploma 1985 Kantonsschule Rämibühl Zürich 2014 Gallup StrengthsFinder
More informationConformity assessment certification
TGA use only This form, when completed, will be classified as 'For official use only'. For guidance on how your information will be treated by the TGA see: Treatment of information provided to the TGA
More informationThe Advantages of ISO 9001 Certification
Standards, d Certification and Regulations Reprisal: Types of Requirements Functional requirements: requirements that specify a function that a system or system component must be able to perform The watch
More informationMTAT.03.243 Software Engineering Management
MTAT.03.243 Software Engineering Management Lecture 17: Other SPI Frameworks and QM Systems Dietmar Pfahl Spring 2014 email: dietmar.pfahl@ut.ee Structure of Lecture 17 Other SPI Frameworks People CMM
More informationReporting Changes to your Notified Body
Reporting Changes to your Notified Body Vicky Medley - Head of QMS, Medical Devices September 2015 1) Requirements & Guidance 2) Reporting Changes - What, When, Why & How 3) Some examples 4) Summary &
More informationA Methodology for Software Process Improvement Roadmaps for Regulated Domains Example with ISO 62366
A Methodology for Software Process Improvement Roadmaps for Regulated Domains Example with ISO 62366 Derek Flood, Fergal Mc Caffery, Valentine Casey, Gilbert Regan Dundalk Institute of Technology, {Derek.flood,
More informationIntegrating IT into the Medical Device Development Process. Presented by: Nancy Paris, MASc, PEng, FEC March 31, 2011
Integrating IT into the Medical Device Development Process Presented by: Nancy Paris, MASc, PEng, FEC March 31, 2011 Presentation Outline Speaker background Introduction to our research group Mission Expertise
More informationGlobal trends in Process improvement
Global trends in Process improvement SEPG North America, Oct 2013 Agenda Changing business environment Top 7 trends in Process improvement Case Studies Summary 2 The Business environment around us is changing
More informationRegulatory Considerations for Medical Device Software. Medical Device Software
Medtec Ireland 2015 Wireless Medical Devices Regulatory Considerations for Medical Device Software Kenneth L. Block, RAC October 7, 2015 Galway, Ireland Offices: Dallas, Texas (12 employees) Tokyo, Japan
More informationCurriculum Vitae Evert-Jan van den Berg
PERSONAL INFORMATION Curriculum Vitae Evert-Jan van den Berg Name Evert-Jan van den Berg Company VAN DEN BERG Consult ApS Address Råbroparken 50 DK-2765 Smørum Phone +45 36 44 65 35 Mobile +45 30 64 68
More informationHow To Know If A Mobile App Is A Medical Device
The Regulation of Medical Device Apps Prepared for West of England Academic Health Science Network and University of Bristol June 2014 June 2014 1 Table of Contents 1 Purpose...3 2 Scope...3 3 The Regulation
More informationCertified Software Quality Assurance Professional VS-1085
Certified Software Quality Assurance Professional VS-1085 Certified Software Quality Assurance Professional Certified Software Quality Assurance Professional Certification Code VS-1085 Vskills certification
More informationRAPS ONLINE UNIVERSITY
RAPS ONLINE UNIVERSITY Practical education and training for business success. For regulatory professionals, there is only one name to know and trust for online education and training RAPS Online University.
More informationNEOXEN MODUS METHODOLOGY
NEOXEN MODUS METHODOLOGY RELEASE 5.0.0.1 INTRODUCTION TO PROJECT MANAGEMENT GUIDE D O C U M E N T A T I O N L I C E N S E This documentation, as well as the software described in it, is furnished under
More informationMEDICAL DEVICE LICENSING REQUIREMENTS Life Sciences British Columbia NRC-Industry Research Assistance Program
MEDICAL DEVICE LICENSING REQUIREMENTS Life Sciences British Columbia NRC-Industry Research Assistance Program Health Canada Regulations on Medical Devices Vancouver, B.C. October 29, 2007 Nancy Shadeed
More informationSoftware within the medical device regulatory framework in the EU
Software within the medical device regulatory framework in the EU E-HEALTH WEEK (AMSTERDAM, 10 JUNE 2016) Erik Hansson, Deputy Head of Unit, DG GROWTH - Health Technology and Cosmetics, European Commission
More informationBrainport Industries Towards the smartest supply chain
Brainport Industries Towards the smartest supply chain John Blankendaal Managing Director 80 Members (turnover 2 bln, 9.000 fte) 2 Brainport Industries provides a supply base for high tech 3 SEMICON MEDICAL
More informationDevelopment of a Process Assessment Model for Medical Device Software Development
Development of a Process Assessment Model for Medical Device Software Development Marion Lepmets, Paul Clarke, Fergal McCaffery, Anita Finnegan, Alec Dorling Regulated Software Research Centre, Dundalk
More informationAgile SW Development @ Siemens
CON ECT INFORMUNITY, 19.9.2013 Neue Software-Trends Agilität Prozesse & RE Agile SW Development @ Siemens Corporate Development Center Dr. Kurt Hofmann > 25 years Siemens ACT SW developer at PSE Team leader
More informationDesign Controls: Are They Worth the Effort?
Design Controls: Are They Worth the Effort? Compliance-Alliance conducted a survey to measure the effects of FDA s design control regulation on the industry. Most respondents believe the controls have
More informationAgile SW Development @ Siemens
CON ECT INFORMUNITY, 24.3.2014 Agile SW Development @ Siemens Corporate Development Center Unrestricted Siemens Aktiengesellschaft Österreich 2013 All rights reserved. Eva Kišo ová - that s me Faculty
More informationProcesses for the Development of Healthcare Applications. Christian Johner
Processes for the Development of Healthcare Applications Christian Johner Process/Life-Cycle Models: The true history Directives and Standards: Requirements with Respect to Processes Conclusion, Recommendations
More informationINDEPENDANT CONSULTING FOR QUALITY AND REGULATORY AFFAIRS EXPERTS FOR MEDICAL DEVICES
INDEPENDANT CONSULTING FOR QUALITY AND REGULATORY AFFAIRS EXPERTS FOR MEDICAL DEVICES REFERENCES ADEQUAT EXPERTISE cooperates from now with companies which are looking for simple and useful solutions,
More informationFrequently Asked Questions. Unannounced audits for manufacturers of CE-marked medical devices. 720 DM 0701-53a Rev 1 2014/10/02
Frequently Asked Questions Unannounced audits for manufacturers of CE-marked medical devices 720 DM 0701-53a Rev 1 2014/10/02 What is an unannounced audit?... 6 Are unannounced audits part of a new requirement?...
More informationEffective Software Verification for Medical Devices
STERLINGTECH AND KLOCWORK WHITE PAPER NOVEMBER 2009 Effective Software Verification for Medical Devices Achieving compliance and meeting productivity goals with static analysis In addition to producing
More informationIntroduction into IEC 62304 Software life cycle for medical devices
Introduction into IEC 62304 Software life cycle for medical devices Christoph Gerber 4. September 2008 SPIQ 9/5/2008 1 Agenda Current Picture Regulatory requirements for medical device software IEC 62304
More informationIS research relevance from an industrial perspective. Ir. A.F.Baldinger Chairman of NAF
IS research relevance from an industrial perspective Ir. A.F.Baldinger Chairman of NAF A.F.Baldinger Studied Applied Physics TU Delft [66-73] Industry Experience: 35 years experience (Telecom, Software
More informationCMMI and IBM Rational Unified Process
IBM Software Group CMMI and IBM Rational Unified Process A practical route to greater development maturity CMMI Made Practical, London, 19-20 th March, 2007 Keith Mantell IBM Rational, UK keith_mantell@uk.ibm.com
More informationQUALITY ASSURANCE IN EXTREME PROGRAMMING Plamen Balkanski
International Journal "Information Theories & Applications" Vol.10 113 QUALITY ASSURANCE IN EXTREME PROGRAMMING Plamen Balkanski Abstract: Our previous research about possible quality improvements in Extreme
More informationQMS for Software as a Medical Device [SaMD] Lessons Learned from a Quality Perspective
QMS for Software as a Medical Device [SaMD] Lessons Learned from a Quality Perspective MedCon 2015 Francis Blacha, Robert Banta Evolution from Physical to Digital Devices From To icloud Platform Mechanical
More informationHow to measure the ROI of SPI as early as possible
How to measure the ROI of SPI as early as possible Jan Jaap Cannegieter Vice President SYSQA B.V. Almere Quality Assurance in ICT / 1 Agenda Measuring the benefits of SPI Reasons for implementing reviews
More informationMedidée Services SA. Nano-Tera.ch. 05 February 2015 part 12. Special Issues Q&A Session. Michael Maier michael.maier@medidee.com www.medidee.
Nano-Tera.ch 05 February 2015 part 12 Special Issues Q&A Session Michael Maier michael.maier@medidee.com www.medidee.com Questions you asked 1/17 In WHICH cases to seek approval 1 - Please provide us with
More informationRegulated Documents. A concept solution for SharePoint that enables FDA 21CFR part 11 compliance when working with digital documents
Regulated Documents A concept solution for SharePoint that enables FDA 21CFR part 11 compliance when working with digital documents Contents Life science industry challenges Regulated Documents our service
More informationMedical Device Classification
Medical Device Classification Dan O Leary CBA, CQA, CQE, CRE, SSBB, CIRM President Ombu Enterprises, LLC Dan@OmbuEnterprises.com www.ombuenterprises.com 603-209-0600 1 Speaker Biography Dan O Leary Dan
More informationFrequently Asked Questions (FAQ) About Patient Management Software Licensing
Frequently Asked Questions (FAQ) About Patient Management Software Licensing V1.0 April 12, 2010 About ITAC The Information Technology Association of Canada (ITAC) is the voice of the Canadian information
More informationMed-Info Regular Information Bulletins for the Medical Device Industry
Med-Info Regular Information Bulletins for the Medical Device Industry Product Service Globalization of Medical Device Approval Mutual Recognition Agreements (MRA) between the EU and the USA and Australia
More informationTotal Product Lifecycle Solutions from NSF Health Sciences Medical Devices
Total Product Lifecycle Solutions from NSF Health Sciences Medical Devices Experts in medical device quality systems, compliance, regulatory affairs, auditing and training www.nsf.org The Right People.
More informationSoftware Quality Assurance: VI Standards
Software Quality Assurance: VI Standards Room E 3.165 Tel. 60-3321 Email: hg@upb.de Outline I Introduction II Software Life Cycle III Quality Control IV Infrastructure V Management VI Standards VII Conclusion
More informationCurriculum Vitae - Arnaud Allonsius
Curriculum Vitae - Arnaud Allonsius Personal Information Name: Full name: Address: Residence: Telephone: Mobile: E-mail: Website: Date of birth: Place of birth: Nationality: Driving license: Marital status:
More informationWant to know more about the Notified Body?
NBG/V 2/07/14 BSI Notified Body (0086) Kitemark Court Davy Avenue Knowlhill Milton Keynes MK5 8PP United Kingdom T: +44 845 080 9000 E: eu.medicaldevices@bsigroup.com W: medicaldevices.bsigroup.com Want
More informationIBM Rational systems and software solutions for the medical device industry
IBM Software August 2011 IBM Rational systems and software solutions for the medical device industry Improve processes, manage IEC 61508 and IEC 62304 standards, develop quality products Highlights Manage
More informationNavigating the New EU Rules for Medical Device Software
Navigating the New EU Rules for Medical Device Software Mathias Klümper and Erik Vollebregt examine how European Directive 2007/47/EC will affect requirements for medical device software. Directive 2007/47/EC
More informationEnabling a healthier tomorrow MEDICAL DEVICES HCL ENGINEERING AND R&D SERVICES
Enabling a healthier tomorrow MEDICAL DEVICES HCL ENGINEERING AND R&D SERVICES The Environment Today How can the current healthcare and medical device infrastructure meet the requirements of a growing
More informationALL Medical Devices regardless of Classification
TÜV SÜD Product Service GmbH 30.09.2013 http://omowizard.files.wordpress.com/2010/07/fit-for-purpose.jpg Folie 1 Medical Device Requirements for Clinical Data Dir. 2007/47/EC Which medical devices require
More informationPrerequisite: Review of the ISO 9001-2008 Standard prior to attendance is strongly suggested. Bring a copy to the training class.
2 DAY ISO 9001-2008 *INCLUDES SPECIFIC ASPECTS OF ISO 9001-2015* INTERNAL AUDITOR TRAINING 2015 Course Offering Description: This program is designed to develop internal quality management systems auditing
More informationMedical Certification: Bringing genomic microcores to clinical use OI- VF- WP- 011
Medical Certification: Bringing genomic microcores to clinical use VoltedFlow GmbH Industriestrasse 23, 6055, Alpnach Dorf, Switzerland 1 Summary VoltedFlow has developed solutions to vastly speed up DNA
More informationResume/CV: Ing. Leo van den Besselaar
Resume/CV: Ing. Leo van den Besselaar Personal Details Title Ing. Male Surname or family name van den Besselaar First or given name Leo (Leonardus Adrianus Maria) Nationality Dutch Date of Birth June 12,
More informationQuality System Overview
Quality System Overview Agenda Agenda ISO Registration Flow Down Requirements Governance Contract Supplier Quality Performance Inspection Quality Assurance : Project Verification Compliance CE Marking
More informationwww.nsf.org The right people. The right solution. The first time.
www.nsf.org The right people. The right solution. The first time. Educational Program Europe January December 2015 Why train with us? The right people. The right solution. The first time. 2 Flexible, Professional
More informationHealthcare System Design. Professional Degree of Engineering
Executive Board Den Dolech 2, 5612 AZ Eindhoven P.O. Box 513, 5600 MB Eindhoven The Netherlands www.tue.nl Author Dr. M. K. Matters-Kammerer Date 6 th of February 2013 Healthcare System Design Professional
More informationCurriculum Vitae. MISR flats. janneketeeuw@usa.net, janneke@haarbergconsulting.com. www.teeuw-interim.nl
Curriculum Vitae NAME: Temp ADDRESS: Teeuw, Janneke Makerere University MISR flats Kampala, Uganda TELEPHONE: +256 784871942 EMAIL ADDRESS: WEBSITE: janneketeeuw@usa.net, janneke@haarbergconsulting.com
More information3TU MSc in Embedded Systems. A critical engineering qualification for future decades
3TU MSc in Embedded Systems A critical engineering qualification for future decades The challenge of Embedded Systems Embedded systems are hardware/software systems built into devices that are not necessarily
More informationRegistration of Class B Medical Devices
Registration of Class B Medical Devices 1 INTRODUCTION Medical devices are classified based on a rule based risk classification system into four risk classes Class A to D with Class A being the lowest
More informationI M HEALING SKIN WITH LIGHT
GRADUATE SCHOOL 2015-2016 I M HEALING SKIN WITH LIGHT Graduate program LIFE SCIENCES AND ENGINEERING * This major is formally part of the Computer Science & Engineering Bachelor program Graduate program
More informationUpdate: Proposed Medical Device Regulation (MDR) & IVD Regulation (IVDR)
Update: Proposed Medical Device Regulation (MDR) & IVD Regulation (IVDR) Paul Brooks Healthcare Solutions Disclaimer The new regulations are not finalized and subject to change http://medicaldevices.bsigroup.com/en-us/resources/whitepapers-and-articles/
More informationYour Software Quality is Our Business. INDEPENDENT VERIFICATION AND VALIDATION (IV&V) WHITE PAPER Prepared by Adnet, Inc.
INDEPENDENT VERIFICATION AND VALIDATION (IV&V) WHITE PAPER Prepared by Adnet, Inc. February 2013 1 Executive Summary Adnet is pleased to provide this white paper, describing our approach to performing
More informationDiagnostic Tests. Brad Spring Director, Regulatory Affairs
Regulatory Challenges in the Development of Diagnostic Tests Industry Perspective Brad Spring Director, Regulatory Affairs September 28, 2011 Balancing Evidence of Safety & Effectiveness and Time to Market
More informationboth the Employer and Contractor teams access and administer contracts in a common environment available 24hrs per day, 365 days per year
CEMAR is a simple to deploy, web-based solution to contract management and reporting with a minimum 99.5% availability. CEMAR achieves compliance through tailored workflow that: covers NEC3 ECC, TSC, PSC,
More informationWaters Quality System Documentation
(x) POLICY - Policy ( ) PROCED - Procedure ( ) WKINST Work Instructions 1 of 39 TABLE OF CONTENTS 1. General... 3 1.1 Introduction... 3 1.3 Process Approach... 4 2. Permissible Exclusions And Items Not
More informationMeasuring the benefits of verification. Jan Jaap Cannegieter. SYSQA B.V. Almere
Measuring the benefits of verification Jan Jaap Cannegieter SYSQA B.V. Almere Almere Quality Assurance in ICT / 1 Agenda Measuring the benefits of SPI Reasons for implementing reviews / inspections Measuring
More informationYour gateway to international certification
DEKRA Your gateway to international certification It s all about confidence On the safe side Access to national and international markets Creating confidence Safety and performance certification is crucial
More informationFirst in Life Sciences. First in Content Management. First in Cust omer Satisfaction
First in Life Sciences First in Content Management First in Cust omer Satisfaction Tired of rigid and complicated software? Are you looking for a sophisticated application that's simple and flexible? One
More informationTesting Process Models
Testing Process Models Process Model of a Test Factory EECS 814 Fall 2009 Jennifer Kaufman Agenda 1. Introduction & Abstract 2. Organizational Models 3. Testing Process Models 4. Process Model of a Test
More informationTriteq Software Services, Products & Skills
Triteq Software Services, Products & Skills Software Management and Development Services Development of bespoke Software Development Processes Development Process Documentations Process Configuration Management
More informationIntelligent development tools Design methods and tools Functional safety
Intelligent development tools Design methods and tools Functional safety Flanders DRIVE Index: Flanders DRIVE 1 Importance of functional safety 2 Functional safety for mechatronic systems 4 Global functional
More informationQMS Manual 2350 Helen Street, N. St. Paul, MN 55109 Page 1 of 5. Quality Management System Manual
2350 Helen Street, N. St. Paul, MN 55109 Page 1 of 5 AETRIUM Quality Management System Manual 2350 Helen Street, N. St. Paul, MN 55109 Page 2 of 5 Introduction It is a strategic decision by Aetrium management
More informationIt s All About Process
It s All About Process A White Paper By Gary Guttridge Principal Change Manage IT Ltd. It s All About Process Page 1 of 10 1. INTRODUCTION As long ago as 1931, the distinguished American economist, William
More informationMedical Technologies. Helbling Technik Innovation, together we do it
Medical Technologies Helbling Technik Innovation, together we do it Innovation, together we do it The world is constantly changing new lifestyles, new desires, new insights and new goals demand effective
More informationSurviving SOX with Scrum. Integrating Scrum in IT Governance at Allianz
Surviving SOX with Scrum Integrating Scrum in IT Governance at Allianz 1 Who are we? Simon Roberts MBA and Dr. Christoph Mathis Independent Scrum coaches and trainers; Scrum since 2002, XP since late 1990s
More informationDISCOVER ASCOM S EXCITING BUSINESS FRITZ MUMENTHALER, CEO
DISCOVER ASCOM S EXCITING BUSINESS FRITZ MUMENTHALER, CEO ABOUT ASCOM OUR STRATEGY ATTRACTIVE GROWTH OPPORTUNITIES AN APPEALING INVESTMENT CASE ASCOM THE ELEVATOR PITCH Two independent ICT businesses,
More informationThe power of co-operation
1 The power of co-operation Joanknecht & Van Zelst @Brainport Region Eindhoven 2 Introducing Brainport Eindhoven Region High tech ecosystem Close co-operation Open innovation Accelerating growth Smart
More informationElectronic GMP Systems
Electronic GMP Systems Specification - Implementation Validation 18 20 March 2015, Prague, Czech Republic SPEAKERS: Kai Kiefer fme AG, Germany Dr Bob McDowall McDowall Consulting, UK LEARNING OBJECTIVES:
More informationEmerging Device Topics for Regulatory Consideration.. Janine Jamieson May 2015
Emerging Device Topics for Regulatory Consideration. Janine Jamieson May 2015 Disclaimer These are my personal views and not necessarily those of MHRA as an organisation. 2 European regulation of combination
More informationMedical Devices: CE Marking Step-by Step
Medical Devices: CE Marking Step-by Step Sylvia Mohr Standards Specialist U.S. Mission to the European Union 1 Introduction CE marking in 8 Steps Overview intended purpose - technical documentation classification
More informationQUALITY CONSULTING SERVICES RAISE
QUALITY CONSULTING SERVICES RAISE RAISE with the experts With increasing competition companies are under pressure to cut costs, and many organizations are leveraging technology to address the problem.
More informationCURRICULUM VITAE DAMIR KUSAR
Zeughausstrasse 29b 8910 Affoltern am Albis +41 79 375 34 82 damir@kusar.ch 29th March 1985 Swiss www.kusar.ch www.damirkusar.ch linkd.in/qj6ejr PROFILE With entrepreneurial drive, motivation, passion
More informationComplianceSP TM on SharePoint. Complete Document & Process Management for Life Sciences on SharePoint 2010 & 2013
TM ComplianceSP TM on SharePoint Complete Document & Process Management for Life Sciences on SharePoint 2010 & 2013 Overview With increasing pressure on costs and margins across Life Sciences, the industry
More informationInformation & Asset Protection with SIEM and DLP
Information & Asset Protection with SIEM and DLP Keeping the Good Stuff in and the Bad Stuff Out Professional Services: Doug Crich Practice Leader Infrastructure Protection Solutions What s driving the
More informationvan den Besselaar Mobile Phone no. : +31(0) 653796401 E-mail: leo.besselaar@lbqconsultancy.nl
Resume/CV Leo van den Besselaar Personal Details Title Ing. Male Surname or family name van den Besselaar First or given name Leo (Leonardus Adrianus Maria) Nationality Dutch Date of Birth June 12, 1963
More informationMedical Device Directive 2007/47/EC What is New? Are we moving towards Drug Rules?
Medical Device Directive 2007/47/EC What is New? Are we moving towards Drug Rules? CEMO Congress, Paris, February 3rd, 2011 Dr. Martine Dehlinger-Kremer Vice President Global Regulatory Affairs Agenda
More informationMedia and Information Provider Unifies Development Processes
Microsoft Visual Studio Customer Solution Case Study Media and Information Provider Unifies Development Processes Overview Country or Region: United States Industry: Media Customer Profile With operations
More informationSoftware Configuration Management. Wingsze Seaman COMP250SA February 27, 2008
Software Configuration Management Wingsze Seaman COMP250SA February 27, 2008 Outline CM and SCM Definitions SCM History CMMI and SCM SCM Tools SCM/Dynamic Systems SCM/Software Architecture Resources 2
More informationQuality Systems Frameworks. SE 350 Software Process & Product Quality 1
Quality Systems Frameworks 1 What is a Quality System? An organization uses quality systems to control and improve the effectiveness of the processes used to deliver a quality product or service A Quality
More informationHow companies leverage quality and quality certifications to achieve competitive advantage
How companies leverage quality and quality certifications to achieve competitive advantage Eize de Boer Systems & Services Certification International Business Development Manager Pharma Supply Chain for
More informationBSI Road Show: September 8 th to 15 th, 2014
BSI Road Show: September 8 th to 15 th, 2014 Post Market Surveillance (including PMCF): common non compliances Ibim Tariah Ph.D Technical Director, Healthcare Solutions Itoro Udofia Ph.D Global Head, Orthopaedics
More informationF15. Towards a More Mature Test Process. Anne Mette-Hass. P r e s e n t a t i o n
Towards a More Mature Test Process Anne Mette-Hass International Conference On Software Testing, Analysis & Review November 19-23 Stockholm, Sweden P r e s e n t a t i o n F15 Friday 23rd November, 2001
More informationCurriculum Vitae Paul Spaans
Curriculum Vitae Paul Spaans Name Paul Spaans Birth date August 15th, 1970 City Almere Phone 06 42218876 E-mail paul@financeondemand.nl Company name Finance On Demand Start date 2005 Chamber of Commerce
More informationCMMI Version 1.2. SCAMPI SM A Appraisal Method Changes
Pittsburgh, PA 15213-3890 CMMI Version 1.2 SCAMPI SM A Appraisal Method Changes SM CMM Integration, IDEAL, and SCAMPI are service marks of Carnegie Mellon University. Capability Maturity Model, Capability
More informationCombination Products. Presented by: Karen S. Ginsbury For: IFF March 2014. PCI Pharma
Combination Products Presented by: Karen S. Ginsbury For: IFF March 2014 Types of products Biological and medical device (freeze dried + syringe dual volume) Medical device and plasma devised product (syringe)
More information