1 MobileLite Wireless G2 5-in-1 Mobile Companion User Manual Document No. 480-MLWG A00 Kingston MobileLite Wireless Page 1 of 21
2 Table of Contents Introduction... 3 What s Included:... 3 Getting to Know MobileLite Wireless G Requirements... 5 Charging the MobiLite Wireless... 5 Installing the MobileLite Wireless Application... 6 Connecting to MobileLite Wireless G2 Using the Kingston MobileLite App... 7 Connecting to MobileLite Wireless G2 Using the Android Device Wi-Fi Settings... 9 Updating the Firmware on the MLWG Getting to know the Kingston MobileLite App Extend your storage using Copy/Move function to and from SD/USB/Offline Charge Your Smartphone Connecting MobileLite Wireless G2 as a Local SD Card/USB Reader Photos Sharing Media Streaming Music Streaming Video Accessing the Internet via the Ethernet Port (Hotspot) Kingston MobileLite Application Settings Accessing the Internet (Bridge Mode) and Network Connection Accessing the Contents Using an Internet Browser Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 2 of 21
3 Introduction MobileLite Wireless G2 (MLWG2) is a portable media reader that allows you to wirelessly stream digital media content (such as music, photos, videos, etc). to your tablet or phone. Serving as its own mobile wireless network, MobileLite Wireless G2 s lithium-ion battery gives you up to thirteen hours of Wi-Fi access to your digital library (within a 30-foot range) anywhere you go. MobileLite Wireless G2 is the perfect solution for expanding your onthe-go media library. What will this device do for you? Extend your mobile storage Simply plug your existing USB Flash drive or SD card to add capacity. Smartphone charger Charge your phone up to 2x with a fully charged MobileLite Wireless. Media Storage device This is great for movies, photos, music, documents. This is not great for applications, see next section. SD Card/USB Reader What won t this device do? Application Storage Most mobile operating systems will not allow you to run apps from external storage. Tablet charger While it will provide a charge to your tablet we feel it is too slow of a process to recommend this function. Standalone Wi-Fi Hotspot There is no Internet connection built into the device. You will need to join the MobileLite Wireless to an existing network in order to use the Internet. Read USB Flash drives, USB external hard drives, SD cards or microsd cards from your mobile device. Wi-Fi Access Point Plug in an Ethernet cable from an existing network to create your own Wi-Fi network. What s Included: 1 - MobileLite Wireless G2 1 - USB Cable (1.5ft. A to Micro-B) (For charging the MLWG2 and connecting to PC as a local reader) 1 - MicroSD Adapter (Allows you to plug a MicroSD card into the MobileLite Wireless G2) Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 3 of 21
4 Getting to Know MobileLite Wireless G2 I A B C D E F G H A. USB 2.0 Port - Allows you to connect an external USB Storage Device to MobileLite Wireless G2. It also allows you to charge your mobile device. B. SD Slot - Allows you to connect a memory card (SD/SDHC/SDXC or any microsd w/ adapter) to MobileLite Wireless G2. C. Battery LED/Power* - Indicates current battery status and current power state. D. Wi-Fi LED - Indicates current status of Wi-Fi broadcast. E. Bridged LED - Indicates whether or not MobileLite Wireless G2 is bridged to an Internet gateway via Wi-Fi or Ethernet. F. Power Button - Powers on or powers off the MobileLite Wireless G2 device. Short press (1 Second): Power Bank Mode/Long press (3 seconds): Wi-Fi Mode. G. Reset Button - Allows you to reset the MobileLite Wireless G2 device back to its original (default) configuration. Hold button down for more than 10 seconds. H. Micro-B USB Port - Allows you to charge MobileLite Wireless G2 or connect it to a standard USB port on your computer for fast, easy data transfer. Each media expansion port will require its own drive letter if media is inserted. I. Ethernet port Allows you to connect an Ethernet cable to create a hotspot for wireless Internet access. Wi-Fi mode will temporarily disable while connected to Ethernet. *The battery LED also indicates how much battery time is left while the MobileLite Wireless G2 is powered on. Green indicates 51% - 100% battery charge remaining; orange indicates 25% - 50% battery charge remaining; and red indicates less than 25% or less battery charge remaining. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 4 of 21
5 Requirements (As a local SD Card/USB reader) Computer running Windows 8.1, Windows 8 (non RT), Windows 7 (SP1), Windows Vista (SP2), Mac OS X (10.7.x+), Linux (v.2.6+ kernel) operating system Mobile devices running Android 4.0 (minimum requirement) Mobile devices with Internet access to Google Play (required to install the Kingston MobileLite App) Charging the MobiLite Wireless We urge you to fully charge the MLWG2 before you begin to use it. This can take up to three hours. The MLWG2 can be charged with a computer s USB port, or a USB power adapter (minimum 1.2A), using the included Micro-B USB Cable Battery LED The battery indicator light on the front of the MLWG2 indicates the current battery strength and tells you whether the MLWG2 is charging when it s connected to a computer or outlet. The battery indicator s LED blinks when it is charging and has a solid green LED when it is finished. The battery LED also indicates how much battery time is left while the MobileLite Wireless G2 is powered on. Green indicates 51% - 100% battery charge remaining; orange indicates 25% - 50% battery charge remaining; and red indicates less than 25% battery charge remaining. Less than 25% battery charge remaining 25%-50% battery charge remaining 51%-100% battery remaining Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 5 of 21
6 Installing the MobileLite Wireless Application To configure MobileLite Wireless G2, you must first install the Kingston MobileLite App (to your Android tablet, or phone) from Google Play (Internet access required). The Kingston MobileLite App is free and allows you to customize the wireless network settings and wirelessly access the content you ve uploaded to your SD/USB device connected to MobileLite Wireless G2. To install the App, please follow these steps: 1. Open Google Play from your Android phone or tablet and search for "Kingston Mobilelite. See Figure 5.1. Google Play may return multiple results for your search, just be sure to select Kingston MobileLite. Figure 5.1 Google Play Search 2. Locate and select the Kingston MobileLite App by Kingston Digital, Inc. and tap the Install button. See Figure 5.2. Figure 5.2 Kingston MobileLite App by Kingston Digital, Install 3. After selecting Install, you will need to accept the App permissions in order to begin the installation of the Kingston MobileLite App to your device. See Figure 5.3. Figure 5.3 App permissions Once the App has been installed, you may exit Google Play and proceed to the next section of this manual. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 6 of 21
7 Connecting to MobileLite Wireless G2 Using the Kingston MobileLite App When you launch the Kingston MobileLite App for the first time, a connection wizard will give you an opportunity to select and join a wireless network, even if you are currently connected to another network. In this example, you see the Wi-Fi network name, MLWG2-XXXX, where "XXXX" represents the last four digits of your MLWG2's MAC address. Each device has a unique MAC address; therefore each unit will have a different name suffix. Once you've selected the MLWG2 network, your Android phone or tablet will connect to the MLWG2 s Wi-Fi network and walk you through a setup wizard. The setup wizard will allow you to configure a personalized SSID name, secure your network with a password, and bridge your device to an existing Internet Connection. Figure Choose a Wireless Network NOTE: The MAC address of your device can be found on the bottom (back side) of the MobileLite Wireless G2 device. When changing the default name of your wireless network, you are also changing the SSID name that gets broadcasted in the list of Wi-Fi networks available to you. This means you will be disconnected from the MLWG2-XXXX network you selected above, and have to join the new network name you created after the setup wizard is finished. (NOTE: All changes in the setup wizard are OPTIONAL, meaning you do not HAVE to make any changes. If you decide to keep the default settings, just click 'SKIP' in the bottom left-hand corner of each setup screen to exit the wizard. The configuration to the MLWG2 can later be changed in the App settings). Figure Name Your MLWG2 Network Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 7 of 21
8 Securing your MobileLite Wireless network with a password protects you from unauthorized users accessing files your network. To protect your network, simply type a password on the line indicated by 'New Password' and confirm it by entering the same password on the second line indicated by 'Confirm Password' (passwords on both lines must match exactly). Once you've created a password, click 'Next' on the bottom right-hand corner of the app and proceed to the next screen. NOTE: By default, there is no security password set for the MobileLite Wireless G2. Figure Securing Your Network You can bridge to the Internet while continuing to use the MobileLite Wireless by selecting a preferred network from the list provided in this step. If the connection is secured by a password, you must authenticate to the network first, and then click 'Finish'. If any changes were made, then the MLWG2 will reboot to save the changes. (Note: The initial setup will only be present the first time you launch the Kingston MobileLite app. For any future changes, you will be required to navigate to the device settings). Figure Connecting to the Internet (Bridge) Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 8 of 21
9 Connecting to MobileLite Wireless G2 Using the Android Device Wi-Fi Settings MobileLite Wireless G2 is its own independent wireless network. When browsing for Wi-Fi networks from your Android device, you will see MLWG2-XXXX, where XXXX refers to the last four characters of the MLWG2 s unique MAC address in the list of available networks to join. From your Android device: Settings --> Wi-Fi --> Choose a Network (MLWG2-XXXX by default). NOTE: The MAC address of your device can be found on the bottom (back side) of the MobileLite Wireless G2 device. By default, there is no security password set for the MobileLite Wireless G2. Once you connect to the MobileLite WiFi network, you will substitute your tablet/phone s Internet connection with MobileLite Wireless G2 s wireless connection. This means you will no longer have access to the Internet. However, MobileLite Wireless G2 does provide a bridging function that allows you to maintain access to MobileLite Wireless G2 s content while connecting to a Wi-Fi Internet connection. Please see page 19 for bridging configuration. Updating the Firmware on the MLWG2 The MobileLite Wireless Application will check for firmware updates automatically. Firmware updates to the MLWG2 will add features along with fix any issues encountered after release of the hardware. It is always recommended to update the firmware to make sure to get the best experience out of the MLWG2. 1. The following will appear once the app is refreshed and if a new firmware is available. 1 2 Figure 8.1 Firmware Update 2. If Update Now is selected, then the firmware will upload to the USB or SD connected to the MLWG2. Note: Once the firmware update is complete, the file will be deleted from the USB/SD. 3. Once the firmware is uploaded to the USB or SD, the firmware update will begin. The update takes 3-5 minutes, during which you cannot access the content on the MLWG2. When the update is complete, the MLWG2 will restart, and the user has to reconnect to the MLWG2. To check the firmware version, connect to the MLWG2, open the MLW app and select settings. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 9 of 21
10 Getting to know the Kingston MobileLite App A. All Files option displays all the files on USB/SD/Offline depending on what media is selected. Accessing either media device will display all stored content of the device regardless of type or extension. See Figure 9.1. B. Photos filters all photos/image file types. MobileLite Wireless G2 will search through all files and folders on the USB/SD/Offline and list the supported image file types in list/thumbnail view. See Figure 9.1. A B C D E F G C. Music filters all the music or audio file types. MobileLite Wireless G2 will search through all files and folders on the device and display the supported Music file types. See Figure 9.1. H D. Video filters video file types. MobileLite Wireless G2 will use this filter to search through all files and folders for supported video file types. See Figure 9.1. E. Search the contents of the USB/SD/Offline storage options. See Figure 9.2. F. Sort the contents of the USB/SD/Offline storage options by Name, Size, Date, and Type. See Figure 9.3. G. Options menu allows you to Refresh, change to List View, and Settings. See Figure 9.4. H. Options menu allows a folder/file to be copied/moved, deleted, and rename/info. (menu items vary according to what you re currently doing in the app). See Figure 9.5. Figure 9.1 MobileLite Wireless G2 Contents I I. Circle button allows adding a new folder and copy/move files and folders. See Figure 9.6. E. Search F. Sort G. Main Options H. Folder/File Options I. Circle Option Copy/Move New Folder Copy/Move Share/Open In Figure Search Figure Sort Figure Main Delete Figure Circles Rename/Info Figure Options Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 10 of 21
11 Extend your storage using Copy/Move function to and from SD/USB/Offline Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 11 of 21
12 Charge Your Smartphone Battery Backup In addition to being its own Wi-Fi network, MobileLite Wireless can also be used as a battery backup. This feature allows you to charge your smartphone using the built-in USB port. To use this function, follow these steps: If the device is powered on, press and hold the power button for three seconds or until Power LED turns off. Attach your mobile device to the USB port on MobileLite Wireless G2 (using the Android Device s own Type-A USB power cable). With MobileLite Wireless G2 powered off, press the power button for 1 second and release; do NOT press and hold the power button, as this will turn the wireless broadcast function on. ( not drawn to scale ) Once the power LED begins to flash, the unit is ready and your mobile device should be charging. Connecting MobileLite Wireless G2 as a Local SD Card/USB Reader To add content to the MLWG2, you can connect it to a computer using the USB cable that came with the device (with a card or USB device connected to the MLWG2) or you can copy content directly to a USB, SD, or MicroSD (using the accompanied adapter) and inserting the media into the appropriate slot on the MLWG2. When connected to a computer, MLWG2 has to be powered off, so it can behave like any standard media reader device, creating a data volume on your PC or Mac for any media type you have inserted on the MLWG2 (i.e. USB, SD, MicroSD). You can populate each volume with digital content that you can later share or access wirelessly via the Kingston MobileLite Application. When copying content to the media, it is highly recommended that you create folders on each volume to help you organize and quickly locate files each time you update and/or change the content of MLWG2 (as opposed to dumping all of your files onto the root volume or into a single folder). For example, you may want to store all of your music files in a folder called My Music, or keep all of your photos in a separate folder called My Pictures, and so on. When you are finished loading content, please safely disconnect the MLWG2 from your computer. This will keep the power of the device off. To turn it back on, press and hold the power button for 3 seconds. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 12 of 21
13 Photos If you want to Copy/Move, Share/Open In, Delete, or Rename/Info, simply tap on the Option Menu bottom right of the image. A menu will appear with the different options seen in Figure The icon at the Copy/Move Share / Open In Delete Rename / Info Figure 12.1 Enable Option Menu. Copy / Move Share / Open In Delete Rename Rename Figure 12.2 Figure 12.4 Copy/Move: Allows you to transfer files to and from USB/SD/Offline. Figure 12.3 Share/Open In: Allows you to share to Facebook or Twitter and open the file in a third party app Delete: Confirm that you want to delete the folder/file. Figure 12.5 Rename: Folders and files. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 13 of 21
14 Sharing Media Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 14 of 21
15 Streaming Music The MobileLite Wireless app has a built in media player that enables users to listen to music while viewing a slideshow or browsing the web. To get started, simply navigate to the Music media button in order to filter all music and select the desired song. Doing so will automatically launch the music player and begin playing the chosen song. Back Progress Bar Single Tap / Repeat Playlist Double Tap / Repeat Song Enable / Disable Shuffle Previous Song Play / Pause Next Song Figure 14.1 Media Player Controls Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 15 of 21
16 An audio title bar will appear while you browse your pictures, documents, etc. Return to Music Player Pause Figure 15.1 Audio title bar To copy, share/open in, delete, or rename an audio file, tap the Option menu icon and select an option: Copy/Move Share / Open In Delete Copy/Move: Transfer audio files to and from USB/SD/Offline. Share / Open In: Allows you open an audio file using your favorite third party audio player. Delete: Delete audio files from USB/SD/Offline. Rename/Info: Rename or check the Info of the audio file. Rename / Info Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 16 of 21
17 Streaming Video If you want to play a video, tap once to play the video in the Kingston MobileLite app video player. Please see Figure Back Info Play / Pause Subtitle On / Off Figure 16.1 Video Player To copy, share/open in, delete, or rename a video, tap the Option menu icon and select one of the options: Copy/Move Share / Open In Delete Copy/Move: Transfer videos to and from USB/SD/Offline. Share / Open In: Allows you to a video (10MB Max) or open a video using your favorite third party video player. Delete: Delete videos from USB/SD/Offline. Rename/Info: Rename or check the Info of the video. Rename / Info Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 17 of 21
18 Accessing the Internet via the Ethernet Port (Hotspot) If you have a wired Internet connection, you can plug an Ethernet cable to the Ethernet port on the Kingston MobileLite Wireless G2. This would allow you to create a hotspot for wireless Internet access. While connected to the Ethernet bridge mode the Wi-Fi bridge mode will be disabled temporally until the Ethernet cable is removed. NOTE: Only compatible with DHCP. Simply connect an Ethernet cable to the Ethernet port. Check that the bridge LED is ON to verify that you have a successful connection to the router. See Figure If you haven t already, make sure to connect to the MLWG2 in your mobile device s Wi-Fi settings. Settings App --> Wi-Fi option --> Choose a Network --> Select MLWG2-XXXX Figure 17.1 bridge LED Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 18 of 21
19 Kingston MobileLite Application Settings A B C D E F G H I J A. Name: This is the SSID name that appears in the list of available wireless networks on your mobile device. The name of the SSID can be changed from this location. The MLWG2 will reboot if any changes are made B. Battery: Battery life indicator. C. Auto Shutdown: If enabled, an idle MLWG2 will automatically shut down at the selected time given. (30 Minutes 4 Hours) D. Firmware: Shows the installed firmware version of MobileLite Wireless G2. E. Visible: Controls whether or not the SSID name will broadcast in the list of available wireless networks. F. Channel: The wireless channel that MobileLite Wireless G2 is currently using. G. Security: Controls whether or not users will be prompted for a password when joining the MobileLite Wireless G2 network. The default setting is None. H. WiFi Network: Allows you to bridge to the Internet while continuing to use the Kingston MobileLite App. Also, you can forget network using this option. I. 3G Dongle Support: Compatible with some 3G USB dongles. Compatibility list in Kingston Support FAQs. J. App Version: Currently installed Kingston MobileLite App version. Note: If any changes were made in settings, then the MLWG2 will reboot to save the changes. Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 19 of 21
20 Accessing the Internet (Bridge Mode) and Network Connection Traditionally, the Wi-Fi antenna on your Android device is used to access the Internet. The MobileLite Wireless G2, however, uses the Wi-Fi antenna on your Android device to stream content, which effectively disconnects your Android device from the Internet. Fortunately, MobileLite Wireless G2 s Wi-Fi antenna supports bidirectional traffic and can be used for implementing a feature called bridge mode. This mode allows you to be connected to MobileLite Wireless G2 while it is connected to a Wi-Fi network (as a host client) that has access to the Internet. To set up this feature and see a list of available wireless networks in your range, open the Kingston MobileLite App and select Options Menu and select Settings. Under the Network Connection section (Figure 19.1), tap on the Wi-Fi network you want to connect to. After making your selection, MobileLite Wireless G2 will prompt you for the Wi-Fi password (if security is enabled) and reboot. If there is no password, the device will automatically reboot. Once MobileLite Wireless G2 has rebooted, you will be prompted to select a wireless network. You MUST select your MobileLite Wireless G2 network in order to maintain access to its contents. Since you ve already connected to the network via MobileLite Wireless s App, there is no need to select it from the list again. If you do select it, you will be disconnected from MobileLite Wireless G2. To verify that you have successfully enabled Bridge Mode: 1. Select the MobileLite Wireless App icon on your Android device. 2. Select the Options Menu. 3. Tap on the Settings. 4. Scroll down to Network Connection and tap on WiFi Network When the lists of wireless networks appear, you will notice a 'check mark' symbol located to the right of the network you selected in the MobileLite Wireless App. See Figure This indicates that the bridge function is working properly and you are connected to MobileLite Wireless G2 and the Internet at the same time. So if you're streaming content from the MobileLite Wireless G2 to your Android device and need to quickly look something up on-line, just open your default browser and away you go. Forget Network When you want the device to forget a wireless network, you click on the Forget Network button. See Figure The bridge LED will turn off. Now the blue check mark symbol will no longer appear next to any network. This indicates that the bridge function is disabled. Figure 19.1 MobileLite Wireless G2 Bridged Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 20 of 21
21 Accessing the Contents Using an Internet Browser The MobileLite Wireless Reader has the option to view the contents on the USB/SD device from a computer wirelessly using the computer s Wi-Fi. 1. On your computer s network settings, connect to the MLWG2 2. Open a supported web browsers (Chrome, Firefox, Internet Explorer, Safari) 3. In the address bar type in You can now access your content from your MLWG2. See Figure 20.1 Figure 20.1 Access Using Browser Document No. 480-MLWG A00 Kingston MobileLite Wireless G2 Page 21 of 21
Overview Basics File Source Starting Screen View Files and Folders Edit Operation List of File Source Local Protected Files Favorites Photo Library External Storage Dropbox Google Drive SkyDrive Bluetooth
USER GUIDE FOR ANDROID DEVICES Compatibility: Android 2.3 or higher 1. Overview... 4 2. Install and Set Up... 4 2.1. Charge your Power Connect... 4 2.2. Charge your smartphone battery with Power Connect...
USER GUIDE FOR ANDROID DEVICES Compatibility: Android 2.3 or higher 1. Overview... 4 2. Install and Set Up... 4 2.1. Download Emtec Connect App... 4 2.2. Connect your Wi-Fi HDD to your smartphones/ tablets
ShareLink 00 Setup Guide This guide provides instructions for installing and connecting the Extron ShareLink 00. The ShareLink USB 00 Wireless Collaboration Gateway allows anyone to present content from
USER GUIDE Web Interface 1. Overview... 4 2. Install and Set Up... 4 2.1. Charge your Wi-Fi HDD... 4 2.2. For Mac users... 5 2.3. Connect your Wi-Fi HDD to your computer (no Internet connection required)...
User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2012 202-10933-04 v1.0 Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online,
Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication
Mobility with Eye-Fi Scanning Guide Scan and Transfer Images Wirelessly with Eye-Fi This document is to be used in addition to the scanner s user guide located on the installation disc. The instructions
Internet and Email Help The following tips are provided to assist you in troubleshooting and managing your Plex Internet and email services. For additional issues or concerns, you may also call our Product
FAQs Frequently Asked Questions Connecting your Linksys router to the Internet 1 What computer operating systems does my Linksys router support? 1 Why can t I connect my computer or device to my router?
2 How to setup EW-7438RPn with a Windows computer to extend an existing Wi-Fi network Note: 1. This instruction use pictures from EW-7438RPn firmware v1.13. 2. If you need to restore to the default settings,
Bank Wireless Portable Hard Drive User s Manual REGULATORY AND SAFETY INFORMATION FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following
BlackBerry Desktop Software User Guide Version: 2.4 SWD-1905381-0426093716-001 Contents Basics... 3 About the BlackBerry Desktop Software... 3 Set up your smartphone with the BlackBerry Desktop Software...
User Manual Table of Contents Getting Started... 1 What s included... 1 Setting up Fitbit One on a computer... 2 Mac & PC Requirements... 2 Installing Fitbit Connect on a computer... 2 Installing Fitbit
Set Up Guide USING YOUR DMX PROFUSION io FOR 1 Connect 2 Set Up 3 Listen SIMPLE PERSONALIZED UNLIMITED ECONOMICAL LICENSED Welcome Thank you for choosing DMX to provide your Pandora listening experience
Store & Share Quick Start What is Store & Share? Store & Share is a service that allows you to upload all of your content (documents, music, video, executable files) into a centralized cloud storage. You
User Guide Contents Contents Overview Package contents 1 Back view 1 Bottom view 2 How to expand your home network 3 What is a network? 3 How to expand your home network 3 Where to find more help 3 Operating
USER GUIDE FOR iphone/ipad Compatibility: Apple ios 5.1 or higher 1. Overview... 4 2. Install and Set Up... 4 2.1. Download Emtec Connect App... 4 2.2. Connect your Wi-Fi HDD to your iphone/ipad (no Internet
Quick Start Guide NVR DS-7104NI-SL/W NVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com Quick Start 1.
Nighthawk AC1900 WiF Range Extender Model EX7000 User Manual December 2014 202-11469-01 350 East Plumeria Drive San Jose, CA 95134 USA Nighthawk AC1900 WiF Range Extender Support Thank you for selecting
EN SwannEye HD Plug & Play Wi-Fi Security Camera Quick Start Guide Welcome! Lets get started. QHADS453080414E Swann 2014 1 1 Introduction Congratulations on your purchase of this SwannEye HD Plug & Play
Share your images and files ANY TIME, ANYWHERE! The PROMASTER MULTI-FUNCTION WI-FI CARD READER is a portable wireless card reader and USB hub that gives you the capability to share and stream your photos,
Model: FI8910W Quick Installation Guide (For Windows OS) (For MAC OS please go to page 17) Indoor MJPEG Pan/Tilt Wireless IP Camera Black White Package Contents IP Camera FI8910W with IR-Cut.x 1 DC Power
genie app and genie mobile app User Manual 350 East Plumeria Drive San Jose, CA 95134 USA June 2012 202-10933-02 v1.0 2012 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced,
Tablet of Contents Specifications.1 What s inside the box Tablet Parts Getting started... Connection to Internet..6 Task Bar..8 Install and Uninstall 9 Camera.10 HDMI.11 Trouble Shooting 11 Specifications
User Guide Vodafone Mobile Wi-Fi R206-Z Designed by Vodafone Welcome to the world of mobile communications 1 Welcome 2 Device overview 3 Getting started: Step 1 4 Getting started: Step 2 5 Mobile Wi-Fi
Quick Setup Guide What is Bitdefender BOX? Think about Bitdefender BOX like an antivirus for your network. It s a hardware device that sits next to your Wi-Fi router and protects all Internet connected
SETTING UP YOUR SYSTEM SETTING UP YOUR SYSTEM So you ve received your brand new Verifone Cloud POS system and are eager to start using it. This guide will show you how to set it up in just a few easy steps.
Movie Cube User s Guide to Wireless Function Table of Contents 1. WLAN USB Adapter Connection...3 2. Wireless Setup...4 2.1 Infrastructure (AP)...5 2.2 Peer to Peer (Ad Hoc)...7 2.3 Settings for PC...8
EN SwannSecure Wi-Fi Monitoring System Setup Wizard Quick Start Guide QW470KIT050115E Swann 2015 1 Welcome The Setup Wizard automatically launches the first time you turn on the Wi-Fi Monitor and walks
V46.01 Model: FI8918W Quick Installation Guide Indoor Pan/Tilt Wireless IP Camera Black White For Windows OS ------- Page 1 For MAC OS ------- Page 11 ShenZhen Foscam Intelligent Technology Co., Ltd Quick
Quick Installation Guide (For Windows & Mac OS) Outdoor Wireless IP Camera Package Contents V1.1 IP Camera Power Adapter Resource CD Ethernet Cable Mounting Bracket(except FI8919) Wi-Fi Antenna Quick Installation
HP MediaSmart Server Software Upgrade from v.1 to v.3 Table of Contents Upgrade Your Server Software to HP MediaSmart Server v.3 2 Before You Begin 3 What's New... 3 Features That Will Change... 4 Prepare
FCC DECLARATION OF CONFORMANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
Contents Configuring the wireless security of your Linksys Wireless-N router through the web-based setup page.. 2 Checking the Linksys router s wireless settings through the web-based setup page and adding
quick reference guide / Product Overview Product Overview Wireless (Blue) The Wireless LED lights up when the wireless feature is enabled. It flashes when the Valet sends or receives data over the wireless
User Guide Vodafone Mobile Wi-Fi R206-Z Designed by Vodafone Welcome to the world of mobile communications 1 Welcome 2 Device overview 3 Getting started: Step 1 4 Getting started: Step 2 5 Mobile Wi-Fi
10 Magni Tablet User Guide MODEL NUMBER: Wireless Mobile Internet Tablet Powered by SYTAB10ST Top View Front View Bottom View Side View SYTAB10ST Getting to Know Your New Tablet: MINI Micro SD Micro SD
Welcome to the new free Cisco Events mobile application! Using this tool, participants can: Connect with peers and Cisco representatives attending an event virtually or onsite Earn points towards exclusive
Model EX2700 User Manual July 2014 202-11395-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on
FreeAgent DockStar Network Adapter User Guide FreeAgent DockStar Network Adapter User Guide 2010 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are
MONSOON MULTIMEDIA User Guide 2010 Monsoon Multimedia, Inc. All Rights Reserved. Contents INTRODUCTION... 2 HO UP THE CABLES... 4 CONFIGURE YOUR VULKANO... 7 USING YOUR VULKANO FEATURES... 15 LIVE TV...
Getting Started This Quick User Guide helps you get started with the IRIScan TM Anywhere Wifi. Please read this guide before operating this scanner and its software. All information is subject to change
Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We
Ultra Dashcam with Smartphone app control EN INSTRUCTION MANUAL 1 Getting to know the Dashcam GPS Receiver Slot 1 Camera Lens Micro HDMI Port 2 Speaker 1 For future application 2 Requires Micro HDMI to
Tip: Select a link above or use Bookmarks in your Acrobat Reader to jump to a topic. here s what you can do MOTOROLA MotoCast Take your music, photos, videos, and documents with you wherever you go. MotoCast
User Guide Vodafone Pocket WiFi Pro Designed by Vodafone Welcome to the world of mobile communications 1 Welcome 2 Device overview 3 Getting started: setup 4 Getting started: use 5 Pocket WiFi online dashboard
Read me first Business Wireless Internet quick install guide Wi-Fi and email set-up instructions included Actiontec Wireless Gateway TELUS Internet account information Record your personal account information
Table of Contents Description of the BlackVue App 3 Features 3 Supported Devices 4 Screen Description 5 Home Screen 5 Video List Screen 6 Connection of BlackVue to a Wi-Fi connection 7 Menu Description
Packing List Quick Installation Guide Quick Installation Guide 1) IP CAMERA X 1 2) Wi-Fi Antenna (only available for wireless model) 3) DC Power Supply X 1 4) Network Cable X 1 5) Mounting bracket 1 6)
Cloud Storage Service User Guide (Web Interface, Android App) Table of Content System Requirements...4 1.1Web Browser... 4 1.2Mobile Apps... 4 Accessing Cloud Storage using a Web Browser... 4 The Web Home
Personal Cloud Support Guide for Windows Mobile Devices Storing and sharing your content 2 Getting started 2 How to use the application 2 Managing your content 2 Adding content manually 2 Viewing statistics
IP Wireless / Wired Camera Quick Installation Guide (For Windows OS) Model:FI8908W Color: Black Model:FI8908W Color: White ShenZhen Foscam Intelligent Technology Co., Ltd Packing List FI8908W Quick Installation
Amcrest 960H DVR Quick Start Guide Welcome Thank you for purchasing our Amcrest 960H DVR! This quick start guide will help you become familiar with our DVR in a very short time. Before installation and
Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or
CLOUDBOX USER MANUAL CLICK HERE TO ACCESS AN UP-TO-DATE ONLINE VERSION of this document. You will find the most recent content as well as expandable illustrations, easier navigation, and search capability.
802.11ac USB 3.0 Dual Band User Manual August 2014 202-11373-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the
Android Dongle User Manual TL869 2 User Manual Android TV Dongle Before using the product, please read this manual thoroughly. The specifications and software in this manual are subject to change without
BlackArmor NAS 110 User Guide BlackArmor NAS 110 User Guide 2010 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are trademarks or registered trademarks
FreeAgent GoFlex Home User Guide FreeAgent GoFlex Home User Guide 2011 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are trademarks or registered
EOS Step-by-Step Setup Guide Wireless File Transmitter FTP Mode Infrastructure & Ad Hoc Networks Mac OS X 10.5-10.6 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without
Not a smoke detector! STK3350 instructions Table of contents Features list 1: Direct Connection from WiFi 2: Enable AP Client 3: Installing the micro SD Card (Not included) 4: Configure the camera using
User Guide Vodafone Mobile Wi-Fi R210 Designed by Vodafone Welcome to the world of mobile communications 1 Welcome 2 Device overview 3 Getting started: Step 1 4 Getting started: Step 2 5 Mobile Wi-Fi web
C2N LYT2644-002A 0513YHM-YH-OT Live Streaming Camera GV-LS2 / GV-LS1 Connection Guide This PDF will give you the steps in order to connect the Live Streaming Camera to your network and digital devices.
V2.01 IP Wired / Wireless Camera Quick Installation Guide (For Windows OS) Model: FI8602/FI8602W ShenZhen Foscam Intelligent Technology Co., Ltd Packing List Quick Installation Guide 1) IP CAMERA X 1 2)
Motorised IP Video surveillance camera for smartphones, tablets and PC / MAC. Protect your home and family remotely! User s manual for Android Application Thanks We thank you for choosing Aquila Vizion.
Step by Step Guide for Upgrading Your NetCamPro Camera to Cloud Mode Using an Android Device Table of Contents Introduction...2 Backing Out Cloud Mode...2 Indoor Camera Factory Reset...2 Outdoor Camera
Reference Guide Pogoplug Family Reference Guide Table of Contents Table of Contents 1. What s Included 2. Setting Up Your Pogoplug Device 3. Back Up a. Backing Up Your Computers b. Backing Up Your Mobile
How to configure Access Point as Wireless Bridge by using the Setup Wizard in CD Disk Thanks for purchasing Edimax Wireless Access Point. We hope this instruction can help you setup the Wireless Bridge
604 wifi WIFI & Internet FUNCTIONS Supplement to the ARCHOS 504/604 User Manual Version 1.2 Please visit www.archos.com/manuals to download the latest version of this manual. This manual contains information
10/2011 - English Edition 1 Quick Start Guide NWA1100N-CE CloudEnabled Business N Wireless Access Point Package Contents - 1 x ZyXEL NWA1100N-CE Access Point - 2 x Detachable Antennas - 1 x Power Adapter
Welcome to the Samsung Galaxy Tab 10.1 Guided Tour Getting Started 1. On the top of the Tab, press and hold the Power button for two seconds. Select your language from the drop-down menu and tap Start.
Point of View SmartTV-500 Center - Android 4.2 English Table of Contents General notices for use...2 Disclaimer...2 Box Contents...2 1.0 Product basics...3 1.1 Buttons and connections... 3 1.2 Connecting
1 SocialPet TM System Installation and Operations Guide Refer to the Quick Start Guide included with the system or read this entire guide before installation. Contents FCC COMPLIANCE... 4 CUSTOMER CARE...
User Manual May 2015 202-11503-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of
V48.01 Model: FI8919W Quick Installation Guide Outdoor Pan/Tilt Wireless IP Camera For Windows OS ------- Page 1 For MAC OS ------- Page 15 ShenZhen Foscam Intelligent Technology Co., Ltd Quick Installation
BlackArmor NAS 220 BlackArmor NAS 220 User Guide 2010 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are trademarks or registered trademarks of Seagate
TASER AXON System End-to-End Deployment Guide This document provides step by step instructions for set-up, deployment, and use of the AXON flex and AXON body camera systems in conjunction with the EVIDENCE.com
SAS-IPCAM115 MANUAL IP CAMERA Table of contents Introduction: Safety precautions: Packaging content: System requirements: Product description: User instructions: Maintenance: Warranty: Disclaimer: Disposal:
Sprint Mobile Hotspot MiFi TM 2200 by Novatel Wireless Frequently Asked Questions (FAQ) General Q: What is the MiFi 2200 by Novatel Wireless? A: The MiFi 2200 is an intelligent mobile hotspot that fits
Quick Reference for: Optimum Online Boost Plus Optimum Link SM Optimum app Advanced Wireless Router Por español, vea al revérso Version 1.0 9815001CAP0311COL Table of Contents Optimum Online Boost Plus...................
Topic: CM630 C-more Remote HMI App SAFETY NOTICE: The C-more Remote HMI App allows the user to connect to remote C-more panels from Ethernet, Wi-Fi, or cellular network connections. The Remote user can